"5-41411"

TaskMaster® Inline Cutting Tool Kit, Cut Capacity: (CU or AL): 0.98", ACSR: 556 kcmil, Guy Wire: 9/16", Guy Wire: (EHS) 9/16", Ground Rod: 5/8", Rebar: #5 (5/8") Grade 40, For Grade 60, Consult Factory, Includes: Tool, (2) Milwaukee® Batteries - 18V 2.0 Ah, (1) Milwaukee® Battery Charger – 120V AC, Shoulder Strap, Molded Carrying Case, Instruction Manual, USB Cord & Specific Control Certification

Category: Cordless Cable Cutters

Werner; Multiladder; Series Mt, Telescoping, Type I, Duty Rating; Ladder Height:5 - 9 Ft; Step Height: 5 - 9 Ft; Extension Height: 11 - 19 Ft; Material: Aluminum; Load Capacity: 300 Lb; Approx. Cu. Ft. Per Unit: 10.800; Step Width: 1 In; Scaffold Height: 1 - 4 Ft; Rails Outside Section: 2-5/8 In X 1-3/8 In; Rails Inside Section: 2-3/8 In X 1 In; Ladder Outside Section: 16 In Wide At Top; Ladder Inner Section: 14-3/4 In Wide

Category: 300 Pound Rated Stepladders

Thermal Transfer Labels, Self-Laminating, .5" x .5" x 1.43", 5 Across, VL, White, 10,000/roll

Category: Self-Laminating Labels

OZ-Gedney Type C Conduit Body, 3/4 IN Hub, Length: 5-5/8 IN, 1-1/2 IN Width, 1-5/8 IN Height, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (6 AWG) Conductors, 7.1 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2, Per NEC section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type C Iron Conduit Bodies

Eaton B-Line series beam clamps, 900lb, Steel, Safety factor of 5, used with 1-5/8" channel, Beam clamp, 1-5/8", 5/8" flange width, Stainless steel type 316

LED Driver, Input Voltage: 100-277VAC, Output Voltage: 24VDC, Wattage: 9.6W Min - 96W Max, Low-Profile Constant Voltage Driver, 5-in-1 Forward and Reverse Phase Dimming: ELV, MLV, TRIAC, 0-10V, 1-10V, 10V PWM Potentiomete, Damp location

Category: LED Driver Power Supplies

25 Ft. Compact Tape Measure, 5-Point Reinforced Frame, Nylon Bond Blade Protection, Optimized Hook Designed for Scoring, Stamped Steel Belt Clip

Category: Tape Measures & Rulers

Service Post Connector, Copper, One Conductor, 10 to 4 AWG, 5/16 Inch Stud, Direct Burial Rated

Category: 1-Wire Service Post Connectors

Keystone Jack, CAT5e. 8-Position, Fog White, Package of 25, 180 Degree Exit

Category: Snap-In Cat 5e Jack Inserts

Snap-In Connector, TracJack, Clarity 5e, CAT 5e, 8P8C, Color: Orange.

Category: Snap-In Cat 5e Jack Inserts

FS Device Box, Dead-End, Hub Size: 3/4 Inch, Aluminum

Category: 1-Gang Aluminum FS & FD Device Boxes

LED Recessed Gimbal Downlight, 5 Inch/6 Inch, 8 Watt, 725 Lumen, Selectable CCT: 2700K/3000K/3500K/4000K/5000K, 90 CRI, 120 Volt, 1 per SKU 4 per Case *Sylvania Part #65120*

Category: 5" / 6" Recessed LED Downlights

Indoor 15 Amp, 125 Volt, NEMA 5-15R, 2-Pole, 3-Wire, Grounded Single-to-Triple Adapter - Green

Category: 15 Amp Residential Grade Duplex Receptacles

Accepts standard 15A and 20A duplex receptacles. NOTE: Standard size for device plates for Plate Location 2 is 5 7/32" (132mm) x 2 3/4" (62mm). Galvanized Steel

Category: Recessed Floor Box Service Fittings

OZ-Gedney BS-A Series Domed Top Design Cover, 1/2 IN Hub, Screw-In Mounting, Stamped Copper-Free Aluminum, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 5

Category: Aluminum Conduit Body Covers

Pre-printed Wire Marker Books are conveniently pocket-sized, containing wire labels printed on vinyl cloth. Markers are durable enough for up to 5 years outdoor UV Resistance, oil and abrasions. They can also be torn in half to label each end of the condu

Category: Wire Marker Booklets

Insert, Aluminum, 5/16 Inch

Category: Electrical Tester Accessories

SHOCKWAVE Linemans Impact Auger Bit 5/8" Diameter x 30" Length

Category: Long Ship Auger Bits

BLI B3083WO-5/8PLN WELDED BEA

Category: Rod & Wire Hangers

BLI BCH21-E-5-8 CABLE TO BEAM

Category: J-Hook From Wire/Rod & Beam

Shallow Strut w/ Slots, PVC Coated Steel, 1-5/8" x 7/8" x 10', 12 Gauge

Category: PVC Coated Strut with Holes

Eaton B-Line series conduit support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.38lbs, Conduit size: 0.5", 0.75", Guide-Rite conduit and box support fasteners, .13" Min mount size, .5" Max mount size

Category: Combination Box/Conduit Hangers From Drop Wire/Rod & Beam

Ground Rod Clamp, Heavy Duty, 5/8 Inch, 10 AWG to 1 AWG, Copper Alloy, Hex Head Bolt, Suitable for Direct Burial

Category: Ground Rod Ground Clamps

IDEC BNL-5

Category: Terminal Block End Stops