"ab-66jp the austin co."

The epoxy applied cable tie mount in natural color is affixed with EMA epoxy adhesive. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, intermediate, and standard cable ties.

Category: Cable Tie Bases

Kit comes complete with adapter ring to secure into the boxes, Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Eaton meter socket, Multi position commercial or resi service, 200A, Over/under, 5x5 inch hub cover plate, #1/0-500 kcmil, 5-jaw, 1-ph or 3-ph, #6-350 kcmil, Lever bypass, Gnd conn (#14-#2 Cu), Triplex, 3-wire, Ringless, 600 Vac, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Main Service Module, Main Terminal Box, 400 Amp, 3-phase, Aic Rated To Installedmain Tenant Breaker, Phase And Neutral Lugs Included, Can Be Bottom Or Top Feed,copper Bus Material, NEMA 3 - Rainproof Enclosure, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

320 Amp, 1-Phase, 4 Jaw, Ring-Type. 3-Wire, 1 Socket, 600V, Surface Mount, Top/Bottom Feed, NEMA 3R. 36.63 Inch Height x 5.68 Inch Length x 15 Inch Width, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

16-14 AWG Vinyl Insulated Spade Terminal #6 Stud Vinyl insulated spade terminals have an open tongue end for rapid insertion on the mounting screw. Typically used on free-standing studs. Vinyl insulated spade terminals are made of electro tin-plated copper, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 20 Count WIRE SIZE: 16-14 AWG STUD SIZE: 6 LENGTH: 0.966 WIDTH: 0.388 BRAND EQUIVALENT: Thomas & Betts 14RB6F Morris Products 01132 Morris Products 10132 Ideal 83-7151 Penn Union S4B-6

Category: Vinyl Insulated Standard Fork Terminals

Product Line: Series 1000, Enclosure Type: Outdoor, Voltage: 120 Volt, 1PH, 2W, Amperage: 200 Amp, CTs Included: 1 Split CT, Electric Meter: Yes, Title 24 Compliant, ASHRAE 90.1 Compliant, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Submeters

LEV 1N120-1D S1K 1P2W 100:01A, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Submeters

Side coupling used to connect a straight section or fitting to the side of a CleanTray Wireway run. This Side Coupling CleanTray, CT46SCSS item measures 4.00x6.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Reducers

A rigid steel pedestal with die-cast aluminum base and mounting holes for bolting to the floor. This Bolt-Down Pedestal, AP23B44 item measures 23.00x4.00x4.00 inches with a material of Steel color Gray.

Category: Industrial Consolet Pedestals

ProTek Rack Angles support 19in rack equipment in the single and double-hinged ProTek product. This ProTek Rack Angles Tapped, PTRA16T item measures 14.00 8U with a material of Steel finish Plated.

Category: NEMA 4 Wall Mount Enclosures

Data Interface Ethernet Port, 120 Volt AC Duplex Receptacle, (1) RJ45 Jack, and 5 Amp Circuit Breaker, Steel, Supports Devices from the Following Manufacturers: Allen-Bradley, GE Fanuc, Schneider, Siemens

Category: Data Interface Ports

BRA80282

Category: Self-Illuminating Exit Signs

Vertically adjust enclosure to the optimal viewing height to meet various ergonomic needs. This Syspend 281-Max Vertical Motion Pedestal Tube, S2M10VP37 item 22-37 lb. capacity with a material of AL finish Anodized.

Category: Industrial Consolet Pedestals

Optional split cover for the horizontal tee with 4x4 exit fitting FRT12X4W6BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Orange, 2 meters.

Category: Category 6 Patch Cords

The Hyper V cable tie mount in black is made of weather resistant Nylon 6.6 and is mounted by #12 (M6) screw or tapered rivet. It comes in packages of 100.

Category: Cable Tie Bases

The cable tie mount in natural color is applied with a #10 (M5) screw and is .61" (15.5mm) wide. It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in indoor environments. It comes in pack

Category: Cable Tie Bases

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Green, 3 ft.

Category: Category 6 Patch Cords

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Blue, 5 meters.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Green, 10 meters.

Category: Category 6 Patch Cords

Braided Expandable Sleeving, 0.13" diameter (3.2mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

Factory-threaded PVC coated nipples save time and money in the field. Electrical continuity is maintained across assembled joints.

Category: PVC Coated Nipples

Installation tool for use with the following stainless steel cross section retained tension ties:Type MRT and MRS: Heavy and double wrapped heavy

Category: Cable Tie Tools