"30295 mulberry metal products"

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, Unilet, GRE Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 4.88" Opening, 72 Cubic Inches and (1) 1-1/2" Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof E Conduit Outlet Boxes

Smooth Metal Wall Plate Junior-Jumbo 3gang Decorator 302 Stainless Steel

Category: 3-Gang Decorator Wallplates

Incandescent Lampholder, Medium Base, Single Circuit, Push-Through, Aluminum Shell Lampholder, 1/8 IPS Tapped Bushing with Set Screw, Brass

Category: Metal Shell Incandescent & HID Lampholders

2-1/2 Inch Pipe Mounted Wire Holder. To Support Service Entrance Cable Prior To Entrance

Category: Service Wedge Clamps

LIMIT SWITCH 600V 10AMP C +OPTIONS,-,metal,plug-in,-20...185 ¦F for standard environment,0.5 Inch NPT Conduit Entrance (screw clamp terminals),1 entry for 1/2 - 14 NPT conforming to ANSI B1.20.1,plug-in,10 A,2(NC-NO),600V,9007,limit switch,plug-in,rotary head,9007C,heavy duty,rotary head,Lever Arm (ordered separately) CW and CCW,NEMA A600/R300,UL Listed - CSA Certified - CE Marked,rotary,standard environment

Category: Assembled Limit Switches

Neoprene High Performance Contact Adhesive, Gray-Green, 1-Quart, Adheres Sheet Metals, Such as Stainless Steel, Aluminum, Cold Rolled Steel and Many Plastics to Numerous Other Substrates

Category: Epoxy Adhesive

65mm Gator® Guillotine Remote Cable Cutter, 12V Charger, Cutting Range: Max. Dia With Insulation = 2.55" (65 mm), Jaw Size: Max. Dia With Insulation = 2.55" (65 mm), Can Be Used In Either Hand Held Or Remote Configuration, Tool Comes Standard With Remote Control (BTC3GL), Rigging Harness (BTC3-LH), 12V Makita Charger And Two 4.0Ah Batteries, Hard Side Metal Case

Category: Cordless Cable Cutters

Cable Tie w/ Metal Barb, Weather Resistant Nylon, Light-Heavy Cross Section, Black, 11.8 Inch Long, .275 Inch Wide, 3" Maximum Bundle Diameter, 120 Pound Minimum Loop Tensile Strength, Pack of 50

Category: Non-Releasable Cable Ties

Switch Outlet/Box, Gangable, 3 x 2 Inch, 1-Gang, 2-1/2 Inch Deep, Side Knockouts: (4) 1/2 Inch, End Knockouts: (2) 1/2 Inch and (4) 21/32 Inch, Bottom Knockouts: (1) 1/2 Inch, Steel

Category: Metallic Switch / Outlet Boxes

AC/Flex Connectorector, 90°, Squeeze, 1-1/2 Inch, Malleable

Category: 90 Degree Two Screw Squeeze Flex Connectors

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRX Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.88" Opening, 18 Cubic Inches and (4) 3/4" Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof X Conduit Outlet Boxes

Conduit Bushing, Insulating, 1 Inch, Threaded, Malleable Iron, For Use With Rigid Metal and IMC Conduit.

Category: Rigid & IMC Bushings

Flex Connector, Type: Squeeze, 1 Inch, Die Cast Zinc, For Use With Flexible Metal Conduit

Category: Straight Squeeze Flex Connectors

Stainless Steel Cable Tie Mounts, 1-Hole, #10 Screw, .90" Long x .40" Wide

Category: Cable Tie Bases

Incandescent Lampholder Socket Dimmer, Full Range Electro-Mechanical Dimmer, Single-Pole, 150W, 120 Volt AC, 60Hz, Single-Pole, Brass

Category: Metal Shell Incandescent & HID Lampholders

EMT Combination Coupling, 1/2 Inch, EMT to Flexible Metal Conduit, Material: Malleable Iron

Category: Malleable Iron EMT To Flex Combination Couplings

Flex Connector, Type: Squeeze, 2 Inch, Malleable Iron

Category: Straight Squeeze Flex Connectors

Liquidtight Connector, 3/8 Inch, 90°, Insulated Throat, Zinc Electroplated Steel

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Flex Connector, 90°, Squeeze, 1/2 Inch, Malleable Iron

Category: 90 Degree Two Screw Squeeze Flex Connectors

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRT Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 4.88" Opening, 76 Cubic Inches and (3) 2" Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof T Conduit Outlet Boxes

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, GUAB Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 2 Inch Opening and (2) 1/2 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof LB Conduit Outlet Boxes

Replacement Die, Round Knockout, Size: 1/2"

Category: Metal Stud Punches

Flex Connector, Type: Squeeze, 2-Screw, 3", Insulated, Die Cast Zinc, For Use With Flexible Metal Conduit, With Insulated Throat

Category: Straight Squeeze Flex Connectors

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron Body with Aluminum Cover, Unilet, GRCA Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (3) 1/2 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof C Conduit Outlet Boxes