"al-ksc"

The TQD Line of devices include thermal magnetic molded case circuit breakers and molded case switches. The devices are complete with Cu/Al line and load lugs. The X2 catalog number suffix indicates Load Lugs only. 50X2 Amps 150 A

Category: 2-Pole Main Circuit Breakers

The TQD Line of devices include thermal magnetic molded case circuit breakers and molded case switches. The devices are complete with Cu/Al line and load lugs. The X2 catalog number suffix indicates Load Lugs only. 50X2 Amps 150 A

Category: 3-Pole Main Circuit Breakers

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or a luminu m windings-C opper gr ound strap- Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear, comprehensive documentation and labeling 83B2672

Category: 33 - 37.5 KVA Dry Type Transformers

Stainless Steel U Die, Yellow, Index 936.

Category: Wire Crimping Dies, Adapters, & Blades

Aluminum Multiple Tap Connector, Clear Insulated, 12 Port, 2 Sided Entry, 10 AWG - 250 Kcmil, Al/Cu Rated

Category: Dual Sided Entry Wire Connector Blocks

Multi-Tap Connector, Aluminum, Insulated, 2 Port, Offset 1 Sided Entry, 14 AWG to 2/0 AWG, 600 Volt, AL/CU Rated

Category: Single Sided Entry Wire Connector Blocks

The Tqd Line Of Devices Include Thermal Magnetic Molded Case Circuit Breakers And Molded Case Switches. The Devices Are Complete With Cu/al Line And Load Lugs.

Category: 240-277V Rated Molded Case Circuit Breakers

Mechanical Lug, Aluminum, 2-Hole Mount, Dual Rated for Copper or Aluminum Conductors, 300 MCM to 800 MCM, Bolt Hole: 1/2 Inch, Hole Spacing: 1-3/4 Inch

Category: 1-Conductor Aluminum Mechanical Lugs

UV Rated Plastisol Covered Al Distribution Connectors, 1-Sided Entry, 5 Ports, #4 AWG- 600 Kcmil, 600 V, 3/8" Hex

Category: Single Sided Entry Wire Connector Blocks

Stainless Steel U Die, Blue, Index 470

Category: Wire Crimping Dies, Adapters, & Blades

Multi-Tap Connector, Aluminum, Insulated, 4 Port, 1 Sided Entry, 10 AWG to 250 MCM, 600 Volt, AL/CU Rated

Category: Single Sided Entry Wire Connector Blocks

Power Distribution Block, Aluminum, 3 Pole, 4 AWG To 14 AWG, 175 Amp, 600 Volt, CU/AL Rated

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs.

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs.

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

BUR KAPO350R 350 KCMIL OFFSET

Category: Aluminum Pigtail Adapters

SNTL 1PH 150KVA 480-240 AL

Multi-Tap Connector, 3-Port, Insulated, 14 - 2/0 AWG, Aluminum, UV Rated Black, 600 Volt, AL/CU Rated

Category: Dual Sided Entry Wire Connector Blocks

Mechanical Lug, Aluminum, 1-Hole Mount, Dual Rated for Copper or Aluminum Conductors, 300 MCM to 800 MCM, Bolt Hole: 1/2 Inch

Category: 1-Conductor Aluminum Mechanical Lugs

Power Distribution Block, 2 Pole, Stud/Stud, 3/8-16 x 1-1/8", 400A, 600VPower Distribution Block, Intermediate Copper, 2 Pole, Stud - Stud, 3/8-16 x 1-1/8 inch, 400 Amp, 600 Volt, CU/AL Rated

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, Intermediate Aluminum, 350 Amp CU, 270 Amp AL, 2 x 14 - 2/0 AWG, 6 x 14 - 2 AWG, Box Lug

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

Aluminum Universal Terminal, 1 Hole, Two: 6 AWG (Str)-300 kcmil, 5/16" Stud, 2 Screws, Al/Cu Rated, Tin Plated.

Category: Aluminum Panelboard Lugs

Multi-Tap Connector, Aluminum, Insulated, 8 Port, 2 Sided Entry, 4 AWG to 600 MCM, 600 Volt, AL/CU Rated.

Category: Dual Sided Entry Wire Connector Blocks

Aluminum Multiple Tap Connector, Clear Insulated, 2 Port, 1 Sided Entry, 4 AWG-600 kcmil, Al/Cu Rated.

Category: Single Sided Entry Wire Connector Blocks

Mechanical Lug, 2 Conductor, 1 Hole , 14 - 2/0 AWG, 1/4 Inch Stud, Aluminum/Tin Plated, CU/AL Rated

Category: 2-Conductor Aluminum Mechanical Lugs