"ds0908bfd5 diablo tools, inc"

EFX 545866 DIE-14X20 14X20MM

Category: Knockout Dies

M18 FUEL™ ½” Ext. Anvil Controlled Torque Impact Wrench w/ONE-KEY™ Kit, Includes: (1) M18 FUEL™ ½” Ext. Anvil Controlled Torque Impact Wrench w/ ONE-KEY™ (2769-20), (2) M18™ REDLITHIUM™ XC5.0 Resistant Battery (48-11-1850R), (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) & (1) Contractor Bag

Category: Cordless Heavy Duty Impact Wrenches

40V max XGT® Rapid Optimum Charger, Charges A 40V max XGT® 2.5Ah Battery In 28 Minutes, And 4.0Ah Battery In 45 Minutes, Built-In Chip Communicates During The Charging Process To Control Current, Voltage, And Temperature, Digital Display Indicates Battery Charge Level (-80%, +80%, 100%)

Category: 40 Volt Cordless Tool Batteries & Chargers

40V max XGT® 4.0Ah Battery, 4 Bright Green L.E.D. Indicators To Clearly See Charge Level, Reaches Full Charge In 45 Minutes Or Less, Digital Communication Within XGT® Actively Protects Against Overload, Over-Discharge And Overheating

Category: 40 Volt Cordless Tool Batteries & Chargers

Belt Clip for Impact Wrench and Drill (Cat. Nos. BAT20CW and BAT20CD), Attach Belt Clip To Your Klein Impact Wrench Or Drill For Portability, Screw Included For Easy Assembly

Category: Tool Holders

Insulated Hand Tool Starter Kit & Roll Up Tool Pouch, 1000 V, Kit Includes: 3 x Insulated Slotted Screwdrivers, 2 x Insulated Philips Screwdrivers, Insulated Long Nose Pliers, Insulated Diagonal Pliers, Insulated Lineman Pliers, Roll Up Pouch

Category: Insulated Screwdrivers

EFX 545810 PUNCH

Category: Knockout Punches

KLE 3259TTS 1-5/16" BULL PIN

Category: Bull Pins

Crimp dies for CT-920, CT-920CH, CT-930, CT-930CH and CT-2920 tools, 500 kcmil flex, 600 kcmil flex.

Category: Wire Crimping Dies, Adapters, & Blades

M18™ 1" Black Iron Press Jaw, Designed For Use on Viega® MegaPress® Fittings, Full 360°Alignment Edge, Easy Opening Jaw Designed for One Handed Use, Compatible With M18™ Force Logic Press Tool (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

3000 Base Cutter Replacement Blade

Category: Raceway Tools

M12™ 1/4” Hex 2-Speed Screwdriver Kit, 275 in lbs of Torque, No Load RPM: 0-400, 0-1,500 RPM, Includes: (1) M12™ 1/4” Hex 2-Speed Screwdriver (2406-20), (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401) & (1) M12™ Lithium-ion Battery Charger (48-59-2401)

Category: Cordless Heavy Duty Hammer Drills

Used for Splitting Mating Surfaces, Also Used for Leveling Machinery and Structures Before Fixing in Place, Forged and Ground Blade with Fine Edge for Easy Entry, Correctly Heat Treated to Best Suit Product Application

Category: Fox Wedges

Utility Bucket, Vinyl Tool Bucket with Swivel Snap, 12-Inch

Category: Canvas Tool Bags

10-Fold Screwdriver/Nut Driver, Torx«, Folding pocket-style 10-in-1 tool with interchangeable bits - 8 screwdriver sizes and 2 nut drivers

Category: Multi-Bit Screwdrivers

IDE33793

Category: Wire Crimping Tools

TOOL KIT

Category: Welding Handle Clamps

Drop Point Blade Pocket Knife Is Made Of D2 Tool Steel For A Durable And Long Lasting Edge, Ambidextrous Crossbar Lock For Opening And Closing, Large Thumb Hole For Multiple Quick Action Opening Techniques, Reversible Deep Carry Pocket Clip For Ambidextrous Hold, Ergonomic Jimping On Top And Bottom For Excellent Grip, Choil On Blade For Easy Sharpening, Lanyard Hole For Drop Prevention

Category: Folding & Lockback Knives

6 IN. INSULATED SCREWDRIVER #3 PH

Category: Insulated Screwdrivers

Crimp dies for CT-3001 tool, #4 AWG Copper, #6 AWG Aluminum.

Category: Wire Crimping Dies, Adapters, & Blades

Portable cutter for 6000 Series Raceway Base. Provides clean and easy square cuts.

Category: Raceway Tools

Crimp dies for CT-920, CT-920CH, CT-930, CT-930CH and CT-2920 tools, 4/0 AWG Copper and 2/0 AWG Aluminum.

Category: Wire Crimping Dies, Adapters, & Blades

Face Shield Frame Designed With Lightweight Materials And Proper Balance To Reduce Neck Fatigue,Flexible Top Flap Is Made From High Temp Resistant Materials To Protect From Flying Objects And Conform To Brim, Versatile Flexible Design Allows Proper Fit On Most Cap Style, Full Brim Hard Hats And Safety Helmets, Convenient Features Include Quick Attachment Or Release Of Earmuff And Horizontal Adjustment To Fit Your Brim For Proper Coverage, Accepts Replacement Lens And Mesh, Cat. Nos. 60476, 60477, 60530, 60531, 60478 (Note: All Sold Separately), Adaptable Modular Design Accommodates The Use Of Hearing Protection And Headlamps, Pivot Lock To Keep Shield In Up Or Down Position

Category: Hard Hat Liners

Hex-Jaw Pliers, Length: 8", Jaw Length: 1.25", Knife Length: 0.78", Pipe Reamer: Up to 1-1/2", 16 Adjustment Positions.

Category: Adjustable Pliers