"ab-664jhfx the austin co."

For attaching a tube to the enclosure allowing 300-degree enclosure rotation. This Syspend 180-Max Flange Coupling, S1MFCG item measures 6.86x5.24x4.93 inches with a material of Aluminum colored Lt Gray.

Category: Industrial Consolet Mounting Accessories

Provides 90-degree bend in Syspend 281-Max system allowing the vertical tube to rotate 300 degrees. This Syspend 281-Max Rotatable Elbow, S2MER item measures 9.21x8.50x4.33 inches with a material of Aluminum colored Black.

Category: Industrial Consolet Mounting Accessories

HOF PSC12610 SERVER CABINET

Category: NEMA 1 Telephone Cabinets

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP4750 item fits 470x500mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Back Panels

LEV 1N277-1D S1K 1P2W 100:01A, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Submeters

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in red premium nylon housing. It has a tab size of 0.187/0.205 x 0.02" (4.8/5.2 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.78"

Category: Female Nylon Insulated Wire Disconnects

The Supra-Grip™ female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.250 x 0.032 (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.93" (23.6 mm) long and 0.35" (8.9 mm)

Category: Female Nylon Insulated Wire Disconnects

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Nylon 6.6 material, it's ideal f

Category: Non-Releasable Cable Ties

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Nylon 6.6 material, it's ideal f

Category: Non-Releasable Cable Ties

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in red vinyl housing. It has a tab size of 0.187 x 0.032" (4.8 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.77" (19.6 mm) long

Category: Female Vinyl Insulated Wire Disconnects

7/16" nut driver for use with the FiberRunner®, GridRunner™, and Wyr-Grid™ Systems.

Category: Heavy Duty Nut Drivers

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

Plasti-Bond split couplings are used to connect two pieces of conduit where the conduit can't be turned because of limited clearance between runs or a wall or other obstruction.

Category: PVC Coated Split Couplings

OM3 1 fiber, SC to pigtail, 900µm buffered fiber, patch cord, no jacket, (one SC connector on one end and open on the other end), Std IL Aqua, 3 meters

Category: Fiber Optic Patch Cords

The cable tie mount in black is applied with a #8 (M4) screw and is 0.61" (15.5 mm) wide. It is made of weather-resistant polypropylene for outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Plasti-Bond device boxes and covers are available in several configurations and may be used in coated conduit systems to accommodate wiring devices, to serve as pull boxes for conductors, or to allow for splices and taps in conductors. Covers are available separately. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated FD Device Boxes

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Orange, 2 meters.

Category: Category 6 Patch Cords

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Green, 14 ft.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Red, 7 ft.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Blue, 2 meters.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Orange, 10 meters.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Orange, 14 ft.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Yellow, 1 meter.

Category: Category 6 Patch Cords