"19438 morris - gwg products inc."

Cable Gland, Size: 40, NPT: 1-1/2 Inch, Cable Range: 1.098 to 1.591 Inch, Explosion-Proof, Nickel Plated Brass, For Use With Armored Cable

Category: Cable Glands - Nickel Plated Brass

Serrated Washer, M40 Metric, Stainless Steel

Category: Cable Gland Serrated Washers

Service Entrance Cap, Size 3 Inches, Width 7.47 Inches, Material Pvc, Color Gray, For Use With Schedule 40 And 80 Conduit

Category: Service Entrance Caps - Non-Metallic

National Electric Code requires electrical distribution equipment to be rated as ?Service Entrance?, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: House Panels

Ground Rod, Copper, Length: 8', Diameter: 5/8"

Category: Copper Ground Rods

Accepts 15A and 20A duplex receptacles and 106 style frame. Includes mini adapter that accepts Pass and Seymour Activate inserts or Wiremold Open System communications modules. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Ivory

Category: 2-Piece Non-Metallic Raceway Covers

Lockout Tagout, Non-sparking aluminum hasp, 1.00"

Category: Lockout Hasps

Type Non Insulated Grounding Clamp, 10 To 2 AWG Conductor, Cast Bronze

Category: Bare Wire Ground Clamps

ground Clamp #10 -2 Stranded, Direct Burial, Rebar

Category: Rebar Ground Clamps

Type GUV U-Bolt Grounding Clamp, 5/8-3/4 IN Rod, 4-2/0 AWG Conductor, Copper

Category: U-Bolt Ground Clamps

E-CURB Diameter Round, 6 inch, Gray, 3-Pack

Category: Solar Racking Attachments

E-Curb Round, 4 Inch Diameter, Structural Adhesive Sealant, Steep Slope

Category: Solar Racking Attachments

Replacement Post Base. Outside Diameter: 16-1/8 in, Inside Diameter: 4-5/8 in, Weight: 14 lbs, Color: Black.

Category: Traffic Posts

Multi Roof Mount Kit - 5/16 X 5 1/4" QB1 Kit SS + 3" Micro + L-Foot & Nuts 25/Kit

Category: Solar Racking Attachments

LED High Bay, Round LED High Bay, Listed for wet locations and IP65 rated, Mounting heights up to 30 feet, 6' Cord Included, 4000K

Category: LED - High Bays

Ni-Flex Disposable Glove, 100% Nitrile, Powder Free, Latex Free, Color: Black, Includes: 1 Box = (100) Gloves, Size: Large

Category: Disposable Gloves

Solar Panel, 360 Watt, 120 Cell, Black

Category: 120 Half Cell Solar Modules

PV Array Skirt Splice

Category: Solar Rail Splice Kits

Ironworker Tool Belt Set With Quick Release Leather Belt, Bolt Bag, Spud Wrench Holder, Connecting Bar Holder, Multi-Functional Bull Pin Holder, Tension Straps, 3-Pocket Tool Holder, A Pro-Pad, Leather Belt With Side Sizing Adjustment Fits 32-Inch To 40-Inch (81 To 102 Cm) Waist Band, Crafted From Thick Full-Grain Leather And Reinforced With Heavy-Duty Rivets With Washer Backings, All Holders Are Built To Withstand The Toughest Of Job Site Conditions, Every Holder Features Tucked Tunnel Loops That Securely And Comfortably Hang Higher Up On Belts And Harnesses, All Leather Products Are Proudly Cut, Sewn, Riveted, And Packaged Here In The Usa, All Holders Ensure Easy Access To All Your Tools For Enhanced Efficiency And Productivity, Not An Occupational Protective Belt

Category: Tool Belts

Flame-Resistant Welding Jacket And Removable Sleeves Made From 100-Percent Cotton Twill, Compliant With Astm F1506 Sec. 7.6, Breathable Fr Mesh On Back Of Jacket Improves Air Flow And Offers Added Comfort When Working In Hot Environments, Allows Convenient Removability Of Sleeves As Needed, Replacement Of Worn Sleeves Or Upgrade To Leather Sleeves Without The Need To Replace The Whole Jacket, Adjustable Collar With Three Button Options For A Comfortable And Secure Fit, Wide And Deep Interior Pockets For Protected Storage, Additional Fr Cotton Flap Behind Metal Snap-Buttons Protects User From Direct Contact From Heat, Welding Jacket And Welding Sleeves Are Machine Washable

Category: 3-In-1 Jackets

Leather Welding Sleeves Are Made Of Flame-Resistant Material Compliant With Astm F1506 Sec. 7.6, Elastic Arm Cuffs Provide A Secure Fit,Sleeves Offers Protection From Weld Spatter And Sparks, 21-Inch Sleeves Provide Maximum Arm Coverage, Compatible With Klein Tools' Short Sleeve Welding Jackets (Cat. Nos. 60788, 60789); Sold Separately, Durable Sleeves Come In A Pair And One Size Fits Most, Cotton Welding Sleeves Also Available For Purchase (Cat. No. 60845); Sold Separately

Category: General Duty Sleeves

Small Univ Valve Lockout (base Only)

Category: Valve Lockouts

BRA LOCK 3" HASP GREEN

Category: Padlocks

Fire Barrier Sealant, Red, 28 Fluid Ounce Cartridge (Not for sale in CA)

Category: Fire Barrier Caulking