"79761 mulberry metal products"

Connecting Bar Holder Freely Swivels And Moves With You When In Unlocked Position, Tool Holder Locks Bar At 0-Degree, 30-Degree, And 60-Degree Angles For Both Left And Right-Handed Use, Tucked Tunnel Loop Design Keeps Tools Tight To Belt And Accommodates Up To 3-Inch (7.6 Cm) Wide Belts, Durable, Full Grain, Russet Leather Patent Pending Holder, Designed In The Usa, Black Oxide Protective Coating To Prevent Rust On Metal Holder, Heavy-Duty Leather For Long Life, Designed For Best Use With All Klein Tools' Hex And Round Connecting Bars

Category: Tool Holders

Traditional Floor Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only, Accommodates All Standard Decora Receptacles, The Flip Lids Are A Double-Hinge Design That Can Open 180 Degrees And Lay Flat, Also Includes Metal Subplate And Pre-Assembled Gasket And Mounting Screws, And Cover Mounting Screws, Black

Category: Round Recessed Box Covers

Liquidtight Connector, 90°, 3 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Switch Box, 1 Gang, Non-Gangable, 3 x 2 Inch, Plaster Ears, Old Work, Welded, Metallic, Depth: 2-1/2 Inch, Bottom Knockouts: (2) 1/2 Inch, Side Knockouts: (1) 1/2 Inch, End Knockouts: (1) 1/2 Inch, Cubic Inches: 12.5

Category: Metallic Switch / Outlet Boxes

Liquidtight Connector, 45°, 2 Inch, Material: Malleable Iron, Insulated, High Temperature Rated.

Category: 45 Degree Steel Liquidtight Flex Connectors

Single Gang Metal Covers with Flip Lids

Category: Recessed Floor Box Service Fittings

Switch Box 3-1/2 in. Deep, Gangable with STAB-IT® Connector, TS Bracket, 1/2 in. Setback, 8 in. #12 Solid Copper Pigtail

Category: Metallic Switch / Outlet Boxes

Liquidtight Grounding Connector, Straight, 3/4 Inch, Steel, Copper Alloy Grounding Lug, For Use With Liquidtight Flexible Metal Conduit

Category: Straight Steel Liquidtight Flex Connectors

316 Stainless Steel Cable Tie, Standard, 20.5 In Long, .310 In Wide, 304 Stainless Steel, 250 lb Tensile Strength, Order in Multiples of 50

Category: Non-Releasable Cable Ties

Sealing O-Ring, 1/2 Inch Diameter, Neoprene, For Use with Liquidtight Flexible Metal Conduit

Category: Liquidtight Connectors - Accessories

Milwaukee; Hole Saw; Ice Hardened; Hole Diameter: 15/16 In; Rpm Mild Steel: 370rpm; Rpm Stainless Steel: 185 Rpm; Rpm Cast Iron: 245 Rpm; Rpm Aluminum: 555 Rpm

Category: Bi-Metal Hole Saws

Black Oxide Drill Bit, Thunderbolt®, Size: 9/64", Length: 2-7/8", Flute Length: 1-3/4", Shank: Round, 135° Split Point Tip, Application: Wood/Metal/Plastic, Package Qty: 1.

Category: Standard General Purpose Drill Bits

Liquidtight Connector, 45 Degree, 2-1/2 Inch, Insulated, Steel With Zinc Chromate Finish, For Use With Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Tin Snips, 12", Cutting Capacity: 24 Gauge Steel, 28 Gauge Stainless Steel, Cutting Length: 3.5"

Category: HVAC Sheet Metal Tools

QUADEDGE TIP™ Decreases Heat Build Up for Faster Drilling, RED HELIX™ for Rapid Material Extraction, ENHANCED TAPERED WEB™ Increases Flute Durability & Core Strength

Category: Standard General Purpose Drill Bits

Switch Box, 1 Gang, Gangable, 3 x 2 Inch, Plaster Ears, Tiger Grip, Drawn, Metallic, Depth: 2-1/2 Inch, Cable Ends: 4, Bottom Knockouts: (1) 1/2 Inch, Cubic Inches: 12.5

Category: Metallic Switch / Outlet Boxes

Conduit Bushing, Insulating, 6 Inch, Threaded, Impact Resistant, Non-Metallic, For Use With Rigid Metal and IMC Conduit

Category: Rigid & IMC Bushings

Produces Factory-Precision Indentations In Stove Pipe And Round Duct

Category: HVAC Sheet Metal Tools

Cable Tie w/ Metal Barb, Nylon, Intermediate Cross Section, Natural Color, 8 Inch Long, .141 Inch Wide, 2" Maximum Bundle Diameter, 40 Pound Minimum Loop Tensile Strength, Pack of 1000

Category: Non-Releasable Cable Ties

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRX Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (4) 1/2 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof X Conduit Outlet Boxes

Drill Bit, Black Oxide, Size: 7/64", Length: 2-5/8", Flute Length: 1-1/2", Shank: Round, 135° Split Point Tip, Application: Metal/Wood/Plastic

Category: Standard General Purpose Drill Bits

Drill Bit, Black Oxide, Size: 17/64", Length: 4-1/8", Flute Length: 2-7/8", Shank: 3-Flat, 135° Split Point Tip, Application: Metal/Wood/Plastic

Category: Standard General Purpose Drill Bits

Black Oxide Drill Bit, Thunderbolt®, Size: 3/16", Length: 3-1/2", Flute Length: 2-5/16", Shank: Round, 135° Split Point Tip, Application: Wood/Metal/Plastic, Package Qty: 1.

Category: Standard General Purpose Drill Bits

Black Oxide Drill Bit, Thunderbolt®, Size: 13/32", Length: 5-1/4", Flute Length: 3-7/8", Shank: 3/8" Reduced 3-Flat, 135° Split Point Tip, Application: Wood/Metal/Plastic, Package Qty: 1.

Category: Standard General Purpose Drill Bits