"74474 current lighting solutions"

LED One-Light Linear Lantern, 9 Watt, 623 Lumen, 3000K, 90 CRI, 120 Volt, Brushed Nickel Finish, Matte White Glass, Wet Location Listed

Category: Outdoor Decorative LED Wall Lanterns

ANC BOLT KIT FOR 4" SQ 11 GAUGE STEEL POLE

Category: Lighting Pole Accessories

LONG ROUND WALL MOUNT TENON

Category: Lighting Pole Accessories

Eaton FAZ supplementary protector,UL 1077 Industrial miniature circuit breaker-supplementary protector,Single package,Medium levels of inrush current are expected,6 A,15 kAIC,Single-pole,277 V,5-10X/n,Q38,50-60 Hz,Standard terminals,C Curve

Category: 1-Pole DIN Rail Mount Circuit Breakers

LED AREA LIGHT 26W NEUTRAL LED WITH SQUARE POLE MOUNT ADAPTORBronze

Category: Outdoor Area LED Lighting

LIT LE S W 1 G EL N

Category: Exit Signs

Stencil Face, Single Face Plate With Extra Face Plate, Two 1.5W/9.6V White LED, White Housing, Red Letter, High-Output Option

Category: Exit Signs with Emergency Lights - LED

ALUMINUM EXIT SIGN

Category: Exit Signs

LED Surface Volumetric, 35 Watt, 4000 Lumen, 3500K, 82CRI, 120-277 Volt, Linear-Faceted Refractor, 0-10 Volt Dimming

Category: LED - Surface Mount Lighting

XITANIUM LED Driver: 75W, 0.7-2.0A, 54V, TE/0-10V Dimming, INTelevolt 120-277v Input. Output Current (Nom): 700-2000 mA.

Category: LED Driver Power Supplies

C-H EAC1420SP CURRENTWATCH EA

Category: Solid Core Current Transformers

Moeller series xEffect - FRCmM-NA RCCB. Residual current circuit breaker (RCCB), 25A, 4p, 30mA, type G/A, UL

Category: DIN Rail Mount Residual Current Devices

Motor Full Load Current: 0.49 - 0.53 Amp. Overload Heater for MS Series, 1-Phase Starter

Category: Overload Protection Manual Starters / Switches

LED Pole Mounted Area Light: 12,000 lumens, 70CRI, 4000K, Type 4 Medium Distribution, 120-277 Volts, Field Adjustable Wattage Selector (Luminaire equipped with the ability to manually adjust the wattage in the field to reduce total luminaire lumen output and light levels. Comes pre-set to the highest position at the lumen output selected), Bronze Finish. Part #: LPA-A06-740-T4-UNV-FAWS-TRPC-BZ

Category: Outdoor Area LED Lighting

EMERGENCY LIGHT/EXIT COMBO WET LOCATION SINGLE FACE RED COLD WEATHER

Category: Exit Signs with Emergency Lights

NEMA Electrically Held Lighting Contactor- Open Type, 10-amp, 12-pole, 120/60 Or110/50 Volt Coil

Category: Open Lighting Contactors

(2) 10 AWG Conductors, Standed Copper, White, 24V, 25 ft. Spool. For use with: Ambiance® LX Lighting System and Socket Placement every 2". Maximum Wattage per Length: 300 Watt @ 12V or 500 Watt @ 24V.

Category: Low Voltage Indoor Lighting Wire

4-Button Toggle Controls: 4-Level Lighting Control, Color: Satin White

Category: Wireless Dimmers & Switches

4-Button Toggle Controls: 4-Level Lighting Control, ON Button: Lights Brighten to Full Intensity, Raise Button: Lights Increase in Intensity, Lower Button: Lights Decrease in Intensity, OFF Button: Lights Dim to Off, Color: Biscuit

Category: Wireless Dimmers & Switches

S811 Open Soft Starter, Premium, Rating: 20-66a, 18.5 Kw At 230v, 30 Kw At 380-400v, 37 Kw At 440v, N-frame, 30 Second Ramp Or 450percent Current Limit At 50 C, Inside-the-delta Connection, Pump Control And Extended Ramp Functions

Category: Advanced Control Softstarters

E57P-12UPN4-Q Inductive Proximity Sensor, 10-48 VDC, 4-Pin, Max Current: 300mA, NO

Category: Premium Inductive Proximity Sensors

2-Conductor Through Terminal Block Rated Voltage: 800 Volts, Rated Current: 41 Amps, 6 mm², Wire Gauge: 24AWG - 10AWG, Center Marking, DIN-Rail Mounted, Cage Clamp, Orange

Category: 6mm Feed Through & Ground Terminal Blocks

Brady's Arc Flash Labels Meet The Current Nec Labeling Requirements. With The Industrial Grade Adhesive, These Labels Stick Permanently To A Wide Variety Of Surfaces. These Basic Arch Flash Labels Are Also Made Of A Polyester Material With An Overlamina

Category: Arc Flash Hazard Labels

Deluxe Pendant, For current bender with serial code ABL & ADY

Category: Electric Conduit Benders