"msb-1 inc."

Pre-Assembled Fire Alarm 4 Inch Square, 3-1/2 Inch Deep Adjustable Box on SSB-TBAR, Sheet Steel

Category: 4" Square Metallic Fire Alarm Boxes With Brackets

Conduit Hanger With Bolt, 2-1/2 Inch, Steel/Zinc, For Use With Rigid/IMC Conduit

Category: Conduit Clamps

Conduit to Flange Clip, Side Mount, Snap Close, 1 Inch EMT, 1/8 Inch - 1/4 Inch Flange, Steel

Category: Flange-Mount Cable/Conduit Clips

Additional Box Clip & Screw Set For Use With BHT-1& BHT-1A

Category: Acoustical T-Grid Ceiling Independent Support Clips

Conduit to Flange Clip, Bottom Mount, Snap Close, 1/2 Inch - 3/4 Inch EMT, 1/8 Inch - 1/4 Inch Flange, Steel

Category: Flange-Mount Cable/Conduit Clips

4 Inch Square Alarm Box, Red, Depth: 3-1/2 Inch With CKO, For Use With Oversized Alarm Devices, Steel

Category: 4" Square Metallic Fire Alarm Boxes

Box Support With Universal Mounting Adapter, For Use With 4 Inch Box, Adjustable 15 - 25 Inch, Depth 2-1/8 Inch and 10 Inch Grounding Pigtail, Steel

Category: Prefab Assemblies

MASONARY SWITCH BOX 3 GANG ORBIT PREASSEMBLED SSB WITH 3 -1/2 DEEP MULTIGANG MASONRY BOX 3-GANG BOX DEPTH ADJUSTA BLE FROM 5/8 TO 1-1/2

Category: Load Center Replacement Parts

Universal Support Hanger for Conduit/Cable, 1/4 Inch Rod Size, #12 - #8, Steel

Category: Acoustical T-Grid Ceiling Snap On Fixture / Box Hangers

1/2 Inch Liquid Tight Sealing Ring, Neoprene Rubber Gasket, Steel Retainer

Category: Liquidtight Connectors - Accessories

30 Inch Pedestal Post, Two (2) 1-Gang Device Openings With Gasketed Blank Covers (1-BC), Includes 10-32 Ground Screw With 10" Solid Cu. #12AWG Pigtail (Top Opening), Gray

Category: RV Power Pedestals

Independent Support Clip, 15/16" T-Grid, 1/16" Flange, 1/4" - 20 Thread, 9/16" Screw Length

Category: Fixture Hangers & Kits

Multi-Function Clip, 1/4” Rod, #12 - #8 Wire

Category: Cable/Conduit From Drop Wire Support

Beam Clamp, 1/4"-20 Tap, 3/4 Inch Jaw, Steel

Category: Beam Clamps - Adjustable

Roof Coupling Plate, Size 6 x 6 Inch, Diameter 1-1/4 Inch, Galvanized Steel

Category: Flashing - Steel Type

Angle Bracket, 1/4 Inch Side Hole, 1/4 Inch Bottom Hole, Steel

Category: 90 Degree Strut Channel Corner Connectors

Cable/Conduit To Stud Attachment, 1” EMT, Supports EMT Conduit Or Mc/Ac Cable, Ensures Conduit Is In-Line With Junction Box Knockout, Allows For Overlap Of Other Fasteners Sharing The Same Screw(s), For Wood Or Metal Studs, Eliminates Offset Bending Of Conduit

Category: Conduit to Stud Supports

Box Support With Universal Mounting Adapter, For Use With 4-11/16 Inch Box, Depth: 2-1/8 Inch and 10 Inch Grounding Pigtail, Material: Steel

Category: Prefab Assemblies

BOX & CONDUIT HANGER SUPPORT UP TO 8X8 BOX TAKE 1-HOLE STRAP

Category: Conduit Hangers From Wire/Rod & Beam

4 Inch Square Universal Mounting Adjustable Box, 3 1/2 Inch Depth, Concentric Knockouts, Steel

Category: 4" Square Metallic Boxes With Brackets

Box/ Conduit Hanger, 1/2" - 3/4" EMT with 9/16" Screw

Category: Metallic Bar Hangers

Hammer On Flange Clip, Bottom Mount, 5/16" -1/2" Flange 1/4" Rod

Category: Flange Clips

Cable Snap Clip, 1/16” - 3/16” Flange, 0.468" - 0.562"

Category: Flange-Mount Cable/Conduit Clips

Stud Grommet, Universal, Snap-In Type; High Strength Non-Conductive Polypropylene Material; 1 Inch

Category: Metal Stud Bushings