"ab-664gsb the austin co."

Modbox™ Components Easily Interconnect For A Customized Mobile Workstation, Easily Attach And Move The Cup Holder Onto Any System Side Rail With One-Handed Release For Added Convenience, Keep Your Favorite Drink Within Reach With The Klein Tools Modbox™ Cup Holder Rail Attachment, Cup Holder Swivels To Keep Your Drink Upright When The Modbox™ System Is Tilted And In Motion, Flexible Fingers Adjust To Secure Different Sizes Of Drink Containers, Store Beverage Holder Inside The Rolling Toolbox And Medium Toolbox (Cat. Nos. 54802Mb, 54803Mb) With The Internal Rail Accessory (Cat. No. 54818Mb), Sold Separately, Perfect Fit For The Tradesman Tumbler (Cat. No. 55580), Sold Separately

Category: Components Kits

Non-Contact Voltage Tester, UL Certified CAT IV 600V AC, 50 to 600 V AC, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), The Tester Will Emit One Long Beep (~0.5s) And Then Shut Off, Note: If The Flashlight Is On, It Will Be Also Shut Off, Low Battery Indication - If Battery Voltage Is Less Than Around 2.4V, The Green LED In The Tip Will Flash 3 Times And The Buzzer Will Send Out One Long Beep, Then Turn Off The Device

Category: Voltage & Continuity Testers

Combo Drill/Tap Bit, Size: 1/4-20NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

The Modbox™ Utility Cart Has A 39-Inch Overall Height Which Makes It Taller Than Most Carts And More Comfortable When Using The Top Shelf As A Work Surface, 6-Inch Rubber Caster Wheels To Effortlessly Move Almost Anything Anywhere, Cart Handle Includes Two Cup Holders And Multiple Compartments For Small Tools, Hardware, Pens, Cell Phones, Utility Knives, And More, Rails Around The Top Shelf Allow For The Attachment Of Modbox™ Accessories And Tool Pouches, Notches On The Top Shelf Can Be Used To Steady Conduit And 2-Inch By 4-Inch Boards For Measuring Or Cutting, Cart Leg Holes Accommodate 1/2-Inch Conduit To Hold Spools Of Wire And Other Items, 500-Pound Capacity

Category: Utility Carts

The CP-C.1 24/10.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 percent and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.

Category: DIN Mount Uninterruptable Power Supplies

Diva Smart Dimmer Switch for the Caséta System, Works With 150W LED Bulbs or 600W Incandescent Bulbs, Does Not Require Neutral Wire, Tap Buttons For Full On/Off; Adjust Slider To Dim Or Brighten Light Level, Preset Allows You To Turn Your Lights On To Your Preferred Predetermined Level, Soft-Glow Light Bar Provides Easy And Precise Dimming Control, Add A 2nd Switch Anywhere By Pairing With A Mountable Pico Remote (Sold Separately), Use With A Mechanical Switch To Create A 3-Way Application, Add A Smart Hub To Connect With Alexa, Apple Home, The Google Assistant, Ring, Serena Shades, SONOS, And More Control At The Wall, With A Pico Smart Remote, With A Phone, Or Voice Assistant (Smart Hub Required For Phone And Voice Assistant Control)

Category: Wired Smart Devices

Quad-12 Deep Well Heavy-Duty Impact Flip Sockets Contain 12 Hex Sizes Combined Into 3 Color-Coded Sockets, Spring-Loaded Action Allows For Hands-Free Access To Either Hex Size By Simply Applying Pressure To The Smaller Socket To Compress It Out Of The Way, Heavy-Duty Impact Sockets And Adapters Are Made Of Heat Treated Cold Forged Steel For Long-Lasting, High Torque Applications, Industry-Standard Color-Coded Painted Rings To Quickly Identify Hex Sizes, Deep Well Sockets Are Ideal For Managing Extended Threads, Recessed Bolts, And Confined Spaces, Offering Exceptional Reach And A Reliable Grip, Store The Small (1/4 To 7/16-Inch) And Medium (1/2 To 11/16-Inch) Quad-Sockets On The Long 1/4-Inch Shaft To Efficiently Swap Between Any Combination Of 8 Hex Sizes For Speed On The Job, Specialized Klein Knect™ (M) Square Drive Adapter For The Large Socket Is Compatible With Klein Tools Pass Through Socket Wrench, 3/8-Inch Square Drive Ratchets And Impact Drivers

Category: Sockets & Socket Sets

Combo Drill/Tap Bit, Size: 10-32NF, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Fluorescent Lampholder, Non-Shunted, Medium Base, Bi-Pin, Slide-On, Turn-Type, Low Profile, Quickwire 18AWG Solid/Str Tinned, White, Includes Captive Nut Screws

Category: Medium Base Bi-Pin Fluorescent Lampholders

3-Gang Toggle Device Switch Wallplate, Standard Size, Material: Thermoplastic Nylon, Device Mount - Color: White.

Category: 3-Gang Toggle Switch Wallplates

2-Gang, 1-Blank 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Strap Mount - White.

Category: Blank/Decorator/GFCI Receptacle Plates

Carbide Tipped Hole Saw, Diameter: 1-1/8", Chuck Size: 3/8", Conduit Size: 3/4"

Category: Carbide Tipped Hole Saws

The nVent CADDY Adjustable Depth Octagon Box with Mounting Plate provides a versatile electrical solution for in wall and between-stud applications. This product series can be installed for hard deck and T-Grid luminaire settings. The innovative flexible mud ring design saves time and labor by addressing the challenges of accommodating various drywall configurations. Acting as an adjustable mud ring, this feature allows the depth to be adjusted by two screws—which proves to be crucial when an electrical box is fixed to a stationary fixture or to accommodate thicker drywall. When attached to a stationary fixture, the box remains fixed while the depth adjustment feature moves in and out to accommodate multiple thicknesses of drywall. Finish: Pregalvanized Material: Steel See cut sheet for dimensions

Category: Octagon Metallic Boxes With Brackets

Padlockable Handle with 3 Padlocks in the OFF-position, Door Interlock in the ON-position. Units/type = 1 pcs. Screw Fixing from the Back Side of the Handle, No Screws on the Front, Ensures Double Insulation, Black.

Category: Padlockable Circuit Breaker Handle Locks

4-Gang, Decora/GFCI Device Decora Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: 4-Gang Decorator Wallplates

1-Gang, (1) 1.406 Inch Hole Single Device Receptacle Wallplate, Standard Size, Material: 302 Stainless Steel, Device Mount - Color/Finish: Stainless Steel.

Category: 1-Gang Single Receptacle Wallplates

Clamp Meter With True Rms Provides Accurate And Reliable Measurements Across Various Applications, Measures Ac/Dc Voltage, Ac/Dc Current, Resistance, Dc Micro Amps, Temperature, Diode Test, Continuity, Capacitance, Frequency/Duty Cycle, And Inrush, Transflective Reverse-Contrast Display Provides Excellent Visibility In Both Sunlight And Dark Environments, Illuminated Dial Ensures Clear Visibility And Easy Reading, Even In Low-Light Environments, Features A Low Impedance (Loz) Mode To Identify And Eliminate Ghost Voltages, Preventing False Readings And Ensuring More Accurate Measurements, Integrated Worklight Illuminates The Work Area For Improved Visibility In Dark Or Confined Spaces, Non-Contact Voltage Detection Is Integrated Into The Clamp Jaw, With Audible And Visual Indicators That Intensify As The Clamp Moves Closer To The Voltage Source, Rated Ip40 For Ingress Protection, Withstands Drops From 6.6 Feet (2 M), And Includes Right-Angle Input Test Leads, Thermocouple, Storage Pouch, Instruction Manual, And 3 X Aaa Batteries, Ergonomic Design And Overmold Provide A Comfortable Grip, With Easy Dial Adjustment Using The Thumb, Clamp Body Includes A Side-Mounted Test Lead Holder And A Back Mount That Accommodates An Optional Magnetic Hanger (Cat. Nos. 69445 Or 69417) For Hands-Free Operation

Category: AC / DC Clamp Meters

1-Gang Toggle Device Switch Wallplate, Standard Size, Material: 430 Stainless Steel, Device Mount - Color: Stainless Steel

Category: 1-Gang Toggle Switch Wallplates

Eaton's Meter Breakers Combine A Single Meter Socket And A Main Circuit Breakerand/or Loadcenter Into One Enclosure. Certain Utilities Will Specify A Meter Breaker Instead Of A Meter Socket And Loadcenter. The Meter Breaker Is Used Where Electricity Enters A Home Or Dwelling. The Utility Attaches A Meter In The Socketto Measure Power Consumption. The Loadcenter Portion Is Used To Distribute The Power Throughout The Home Using Various Circuits. Eaton Offers A Variety Of Designs To Meet Local Utility Specifications. Ul Listed.

Category: Meter Mains - with Distribution

50 Amp, 125/250 Volt, NEMA 14-50P, 3P, 4W, Plug, Straight Blade, Industrial Grade, Grounding, Angle - Black

Category: 50 Amp Straight Blade Plugs

CO Contact Cleaner, Application: Cleans Sensitive Electrical/Electronic Equipment, Includes: (1) 14 oz Aerosol Spray Can

Category: Environmentally Friendly Cleaners

Quad-16 Deep Well Heavy-Duty Impact Flip Sockets Contain 16 Hex Sizes Combined Into 4 Color-Coded Sockets, Spring-Loaded Action Allows For Hands-Free Access To Either Hex Size By Simply Applying Pressure To The Smaller Socket To Compress It Out Of The Way, Heavy-Duty Impact Sockets Are Made Of Heat Treated Cold Forged Steel For Long-Lasting, High Torque Applications, Industry-Standard Color-Coded Painted Rings To Quickly Identify Hex Sizes, Deep Well Sockets Are Ideal For Managing Extended Threads, Recessed Bolts, And Confined Spaces, Offering Exceptional Reach And A Reliable Grip, Store The Small (1/4 To 7/16-Inch) And Medium (1/2 To 11/16-Inch) Quad-Sockets On The Long 1/4-Inch Shaft To Efficiently Swap Between Any Combination Of 8 Hex Sizes For Speed On The Job, Modbox™ Accessory Case, A Modular And Organized Storage Solution Designed For Easy Access On Any Job, Featuring A Small Parts Storage Tray For Fasteners And Bits

Category: Sockets & Socket Sets

2-Gang, 1-Duplex 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: Duplex Receptacle / Decorator-GFCI Combination Wallplates

Hex Driver Sizes Include: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, And 9/16-Inch, Impact-Rated Sockets For The Toughest Driving Applications, Flip Sockets Enable Quick Access And Convenience To Common Sizes, Color Coded Hex Sizes For Easy Identification, Store Sockets In Any Order And Orientation On The Shaft, Bit Holding Design Allows The 1/4-Inch Socket Size To Drive Hex Fasteners And Hold Screwdriver Bits, Flip Socket Set Can Quickly Attach To An Impact Driver Or Our 1/4-Inch Quick-Connect Driver Handles For Any Situation, Handle Not Included

Category: Sockets & Socket Sets