"80pk-10 electronics corporation"

Field Metrology Well with B Insert and Process Electronics, 50 to 660°C

Category: Process Meters

Digital Multimeter, Model: 8808A x, Voltage Rating: DC: 200 MILV - 1000 V, AC: 200 MILV - 750 V, Amperage Rating: DC: 200 MILAMP - 10 AMP, AC: 20 MILAMP - 10 AMP, Frequency Rating: 20 HZ - 1 MHZ, Resistance: 200 OHM - 100 MOHM, Accuracy: 0.015 Plus 0.003 For DC Voltage, 0.2 Plus 0.05 For AC Voltage, 0.02 Plus 0.003 For Resistance, 0.02 Plus 0.005 For DC Current, 0.3 Plus 0.06 For AC Current, 0.01 PCT Frequency, Display: VFD Multi Segment, Dual Readings, Temperature Rating: Operating: 0 - 50 DEG C, Storage: -40 To 70 DEG C, Peak Hold: Yes, Diode Test: Response Time: 100 Samples/S With Audible Tone, Maximum Reading: 1.9999 V, Resolution: 0.1 MILV, Fastrate, Dimensions: 3.46 IN Height X 8.56 IN Width X 11.7 IN Depth, Resolution: 5.5 Digits, Continuity: Threshold: 20 OHM, Test Currents: 1 MILAMP, Response Time: 100 Samples/S With Audible Tone, Fastrate, Maximum Reading: 199.99 OHM, Resolution: 0.01 OHM, Interface: RS-232, USB Port, Math Functions: Minimum/Maximum, Relative, Hold, Compare And DB Functions, UL 61010-1:2004, AN/CSA C22.2 No. 61010.1:2004, Designed To Comply With EN 61010-1:2001, ANSI/ISA 61010-1 (S82.02.01):2004

METROLOGY WELL: Lightweight, portable, and fast Insert B, imperial comparison holes, 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics.

FLU 5622-10-D PROBE FAST RESP

METROLOGY WELL: Lightweight, portable, and fast Insert A, imperial misc. holes , 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics. Includes test leads, and 6-pin DIN connector for reference probe.

Leather Meter Case, Length: 10", Width: 3-1/8", Depth: 2-1/8", Features: Tool Belt Loop, Top Flap for Electrical Testers, Compatible With: Fluke Electrical Testers

Category: Meter / Phone Holders

Replacement Probe Tips, 10 Count, For Use With Fluke 500 Series Battery Analyzers

Category: Electrical Tester Accessories

AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT Plus 1 AMP (48 - 65 HZ) ( percentage Reading Plus Floorspec), Enclosure: IP40 (IEC 529), Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output Cable, Operating Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 71 DEG C, Dimensions: 4.37 IN Width X 8.5 IN Length X 1.77 IN Depth, CAT III 600 V, CAT IV 300 V, For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes

FLU 5622-10-J PROBE FAST RESP

FLU 5622-10-G PROBE FAST RESP

FLU FLUKE-750PD10 PRESSURE MODULE, -10 TO 10 (-0.7 TO 0.7 BAR), (-70 TO 70 KPA)

Category: Process Meters

FLU 5622-10-P PRT FAST RESPON

FLU 5622-10-L PROBE FAST RESP

FLU 5622-10-M PROBE FAST RESP

FLU A-CB-HT-M12-W08-10

FLU 5622-10-B PROBE FAST RESP

Digital Infrared Thermometer, Handheld, Temperature Range: -30°C to 500°C (-22°F to 932°F), Resolution: 8:1.

Category: Temperature Testers

Cleaning Kit, Fiber Optic, Cube with Wipes, 10 Cards with Sealed Cleaning Zones, Solvent Pen, 2.5 and 1.25 mm Port Cleaning Swabs, Carrying Case

Category: Fiber Termination Accessories

LinkIQ™ Industrial Ethernet Tester, Measure Network Capacity Up To 10 Gig Via Frequency Based Measurements, Troubleshoot Ative Networks By Providing Connected Switch Information (Switch Name, Port Number, & VLAN Info), Install & Troubleshoot PoE Devices Via Switch Negotiation & PoE Load Test, Graphical Wiremap & Length Test To Identify Common Faults That Occur With Cabling Installation, Document Work Through LinkWare™ PC Reporting, Support All Industrial Ethernet Protocols (EtherNet/IP, PROFINET, EtherCAT, & Others), Industrial Ethernet Kit Supports Industrial Connectors (M8D, M12D, M12X), Includes LinkIQ™ Cable + Network Tester With Multi-Connector Adapter With Magnetic S0trap, RJ45 Remote-ID #1, Quick Reference Guide, USB-C To USB-A Cable,?Charging? Cable, Cat6A Patch Cord, RJ45 Male To RJ45 Female Patch Cord, RJ45/M12X Patch Cord, RJ45/M12D Patch Cord, RJ45/M8D Patch Cord,?RJ45/11 Modular Adapter,?Hanging Strap With Remote ID Holder, & Duffle Bag

Category: Network Cable Testers

LinkIQ™ Cable + Network Tester Kit, Measure Network Capacity Up To 10 Gig Via Frequency Based Measurements, Troubleshoot Ative Networks By Providing Connected Switch Information (Switch Name, Port Number, & VLAN Info), Install & Troubleshoot PoE Devices Via Switch Negotiation & PoE Load Test, Graphical Wiremap & Length Test To Identify Common Faults That Occur With Cabling Installation, Document Work Through LinkWare™ PC Reporting, Support All Industrial Ethernet Protocols (EtherNet/IP, PROFINET, EtherCAT, & Others), Industrial Ethernet Kit Supports Industrial Connectors (M8D, M12D, M12X), Includes LinkIQ Cable+Network Tester, LinkIQ With Remote IDs #1-7, RJ45-RJ45 Patch Cord, AC Charger, RJ45/11 Universal Coupler, Intellitone Pro 200 Probe & Duffle Bag Carrying Case

Category: Network Cable Testers

Handheld Vibration Tester, Low Frequency Range: 10 Hz to 1000 Hz, High Frequency Range: 2000 Hz - 20,000 Hz, Infrared Thermometer: -20°C to 200°C (-4°F to 392 °F), Internal flash memory for up to 3500 measurements, Audio output, External accelerometer, USB 2.0 communication. Includes: USB cable, Storage case, Belt Holster, CD-ROM, 2 AA batteries.

Category: Vibration Meters

FLU 3925-5 MINIGRABBER 10/PKG

FLU 3925-4 MINIGRABBER 10/PKG

FLU 6384-0 JACK BANANA 10/PKG