"ab-242412sb the austin co."

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Green, 7 ft.

Category: Category 6 Patch Cords

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Blue, 3 meters.

Category: Category 6 Patch Cords

C-H QC1035 35A SP CKT BRK

Category: 1-Pole Cable-In / Cable-Out Circuit Breakers

M1BBK2 is an optional back box kit for that allows the ELK-M1KP2 keypad to be flush (recess) mounted. Used in place of standard surface mount back box. Compatible with ELK-M1KP2 only.

Category: Security Panel Flush Mount Kits

Digital Wall Switch, 1-Button, Multi-Location, Infrared Transceiver, Color: White. * LMSW-101-W-U * Made in the USA * LMSW-100 Series Digital Wall Switches are low voltage devices for energy-saving manual on/off control of one or more loads from one or more locations. They are part of a Digital Lighting Management (DLM) system and can control any load(s) connected to DLM room controllers.

Category: Digital Lighting Switches

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Black, 2 meters.

Category: Category 6 Patch Cords

4012-QC TERMINATION - Nema 4X protection meets the NEC Code requirement for outdoor applications, such as construction sites, portable trailers, multi-dwelling units, schools and industrial environments.

Category: Building Entrance Terminals

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Red, 3 meters.

Category: Category 6 Patch Cords

Braided Expandable Sleeving, 0.50" diameter (12.7mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, white, Flame Retardant, Polyethylene Terephthalate, 500 ft. per reel

Category: Braided Expandable Sleeving

The R200X225V1T Thermal Transfer Turn-Tell Label has an innovative design that allows it to rotate to any angle for improved visibility, aesthetics, and repositioning on wires/cables. It can easily be installed on existing terminated wires/assemblies and does not require disconnecting wires/cables. Use with Easy-Mark Plus Labeling Software and TDP printers. 2.0" x 2.25" (50.8 mm x 57.2 mm). Color White. 1000 labels.

Category: Repositionable Labels

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Red, 14 ft.

Category: Category 6 Patch Cords

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Black, 5 meters.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Black, 7 meters.

Category: Category 6 Patch Cords

Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod

Category: Brackets

4" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

nVent ERICO copper bonded rods combine the strength of steel for ease of installation with molecularly bonded copper for long lasting corrosion resistance. Pointed, 3/8" x 5' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

ABB LY16-4 Connecting Strip, Shrt.br, af09-16, 3 Pole

Category: Terminal Block Jumper Bars

MERV 13 Dehumidifier Filter, Compatible with the Broan® B98DHV & B120DHV Dehumidifier

Category: Replacement Fan Filters

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

Kit comes complete with adapter ring to secure into the boxes, Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Industrical Control Transformer, 3PH 500KVA 480-208Y120 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated

Category: Dry Type - 333 - 750 KVA

The vibration resistant, right angle style female disconnect is made of brass and is tin-plated. It is fully insulated in blue nylon and has a funnel entry with insulation support. It has a tab size of 0.205/0.187 x 0.032" (5.2/4.8 x 0.8 mm) and supports

Category: Female Nylon Insulated Wire Disconnects

"two 3/8 X 8"" (10 Mm X 2.4 M) I.d. Hoses With 3/8 (10 Mm) Nptf Male Fitting Onone Hose And 1/2 Nptf Male Fitting On The Other Hose "

Category: Corded Hydraulic Hoses