"polaris it-4"

1.00/.50 Thin Wall Heat Shrink, 6 Inch Length, 600 Volt, Round, Polyolefin, 4 Pack

Category: Thin Wall Heat Shrink

Service Post Connector - One Wire Type 2 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Category: 1-Wire Service Post Connectors

NSI CAL40 4/0 STR CAST ALUMIN

Category: 1-Hole Copper Compression Lugs

Vinyl Insulated Spade, 12-10 AWG, 1/4 Stud, 300 Volt, Yellow, 40 Piece Pro Pack

Category: Vinyl Insulated Standard Fork Terminals

Vinyl Insulated Ring Terminal, 12-10 AWG, 1/4" Stud, 300 Volt, Yellow, 40 Piece Pro Pack

Category: Vinyl Insulated Ring Tongues

Nsi Pt4/0 4/0 Pin Terminal

Category: Copper Pigtail Adapters

Nylon Insulated Ring Terminal, 7 AWG, 1/4? Stud

Category: Nylon Insulated Ring Tongues

Voltage Markers 240 Volts, 4ea. 4.5x1.125"

Category: Voltage Markers

Vinyl Insulated Spade, 12-10 AWG, 1/4" Stud, Small, 300 Volt, Yellow, Pack Of 12

Category: Vinyl Insulated Standard Fork Terminals

Bare Ring Terminal, 22-18 AWG, 1/4" Stud, 600 Volt, Silver, 100/Pack

Category: Nylon Insulated Ring Tongues

NSI FTH5A-D ADHESIVE TIE MOUN

Category: Cable Tie Bases

Easy-Splice Heat Shrinkable End Cap 4/0 AWG - 750 MCM These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

Category: Heavy Wall Heat Shrink

2 Port Heavy Duty Dual Rated Transformer Lug 350 MCM - 6 AWG Heavy Duty Dual Rated Transformer Lugs are versatile and reusable set screw connectors made from high strength 6061-T6 aluminum alloy for superior electrical and mechanical performance. Two set screws per wire hole ensure an exceptional connection. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Mounting hole spacing is NEMA 1-3/4". Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.

Category: 2-Conductor Aluminum Mechanical Lugs

NSI VM-B-36 VOLTAGE MARKERS

Category: Voltage Markers

NSI L314 3 AWG CU COMPRESSION

Category: 1-Hole Long Barrel Copper Compression Lugs

NSI MRST1420 RAPID SET

Category: Vertigo Screw Anchors

120-480V 50/60 Hz 15 amp maximum receptacle with 3 colorcoded 12” long, #14 power leads and 4 color-coded 12” long, #18 signal leads.

Category: Photo Control Accessories

NSI VM-A-11 VOLTAGE MARKERS 4

Category: Voltage Markers

2 Port Aluminum Dual Rated Transformer Stud Connector 500 MCM - 4 AWG Aluminum dual rated transformer stud connectors are versatile and reusable set screw connectors made from 6061T-6 aluminum alloy for superior electrical and mechanical performance. Clear plated for low contact resistance- stud is tin plated copper which provides low contact resistance for connection to transformer. For use with copper and aluminum conductors. Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.

Category: Transformer Lug Kits

3 Port Heavy Duty Dual Rated Transformer Lug 350 MCM - 6 AWG Heavy Duty Dual Rated Transformer Lugs are versatile and reusable set screw connectors made from high strength 6061-T6 aluminum alloy for superior electrical and mechanical performance. Two set screws per wire hole ensure an exceptional connection. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Mounting hole spacing is NEMA 1-3/4". Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.

Category: 3-Conductor Aluminum Mechanical Lugs

Nsi 600l2 NEMA Panel Lug 600 mcm-2 Awg Mounting Hole 1 3/4 Center To Center

Category: Aluminum Panelboard Lugs

NSI 1036 225A 4-14 AWG 36 CIR

Category: Load Center Neutral & Ground Bars

NSI G-2-S "BRONZE GROUND CLAM

Category: Bare Wire Ground Clamps

Premium 070 Electrical Tape Yellow, 3/4" X 66 Ft, -18 to 105c, 7mil, 600v, UL CSA

Category: Color Coding Tape