"polaris it-4"

NSI 1450-4 14 INCH YELLOW CAB

NSI 6-350LL8 LUG 350 MCM-6 AW

Category: 4-Conductor Aluminum Mechanical Lugs

insulation Piercing Connector 4/0-2 Main, 2/0-6 Tap

Category: Splices - Insulation Piercing

NSI 4C-14-15611 COPPER MULTIP

NSI PC4040-LS-W 4 X 4 LOK-SLO

Nsi Gp-350wc 350-4/0 Main tap 350-6

Category: Aluminum Tap Lugs

NSI EWG 7060-4 YELLOW

NSI HMSS-4-40 HOT MELT SEALAN

Copper Lay-in Lug with stainless steel screws for grounding or in continuous loop bonding, 4-14AWG.

NSI 418-SB 4" 18 LB CABLE TIE

Category: Non-Releasable Cable Ties

NSI 418F-ID "4"" FLAG I.D CAB

Category: Non-Releasable Cable Ties

NSI CAL40 4/0 STR CAST ALUMIN

Category: 1-Hole Copper Compression Lugs

Nsi Pt4/0 4/0 Pin Terminal

Category: Copper Pigtail Adapters

Vinyl Insulated Spade, 12-10 AWG, 1/4 Stud, 300 Volt, Yellow, 40 Piece Pro Pack

Category: Vinyl Insulated Standard Fork Terminals

Vinyl Insulated Ring Terminal, 12-10 AWG, 1/4" Stud, 300 Volt, Yellow, 40 Piece Pro Pack

Category: Vinyl Insulated Ring Tongues

Service Post Connector - One Wire Type 2 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Category: 1-Wire Service Post Connectors

NSI VM-B-27 VOLTAGE MARKERS 1

Category: Voltage Markers

1.00/.50 Thin Wall Heat Shrink, 6 Inch Length, 600 Volt, Round, Polyolefin, 4 Pack

Category: Thin Wall Heat Shrink

NSI CTH-24 COPPER C TAP 2 SOL

Category: C-Tap Press-On Lugs

NSI VM-B-37 VOLTAGE MARKERS 2

Category: Voltage Markers

Short Barrel Copper Lug, one hole with peep hole, wire range of 6 AWG. Produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Marked with die index and color coded blue. cULus Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

2 Port Heavy Duty Dual Rated Transformer Lug 350 MCM - 6 AWG Heavy Duty Dual Rated Transformer Lugs are versatile and reusable set screw connectors made from high strength 6061-T6 aluminum alloy for superior electrical and mechanical performance. Two set screws per wire hole ensure an exceptional connection. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Mounting hole spacing is NEMA 1-3/4". Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.

Category: 2-Conductor Aluminum Mechanical Lugs

NSI VM-B-36 VOLTAGE MARKERS

Category: Voltage Markers

Easy-Splice Heat Shrinkable End Cap 4/0 AWG - 750 MCM These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

Category: Heavy Wall Heat Shrink