"b610-05-024-06 jmc steel group"

Bullet Threaded Conduit Hub, 1 Inch Diameter, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Conduit Hubs

Deep Strut, Elongated Holes (2" on Centers), 2-7/16" Height, 1-5/8" Width, Pre-Galvanized Steel, 12 Gauge, Sold In Multiples of 10 Ft.

Category: Steel Strut with Elongated Holes

Wall-Mount, Type 4X, Enclosure, Clamp Cover, Size/Dims: 24.00x24.00x8.00, Material/Finish: SS Type 304.

Category: Stainless Steel Wall Mount Enclosures

TS 8 Baying System, Sheet Steel, Dipcoat-primed, Powder-Coated on the Outside, RAL 7035

Category: Indoor Free Standing Data, Audio, & Video Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Rigid Compression Coupling, 2", Concrete Tight, Steel

Category: Steel Rigid Conduit Threadless Compression Couplings

Reducing Bushing, Threaded, 1-1/4 x 3/4 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Consolet, Hinged Sloped Cover, Size: 8 x 20 x 7.09 Inch, Material/Finish: Steel/Gray, Designed to House a Variety of Electronic Control or Instrumentation Devices, Consolets Provide Protection from Dust, Dirt, Oil, and Water. Flexible Design Allows for Mounting on Either of Two Sides, Creating Control Surfaces of 30 Degrees or 60 Degrees. Consolets Can Be Mounted on Desktops, Pedestals, or Other Flat Surfaces.

Category: Industrial Consolets

701P0004-CE/A102FF6B-024

Deep Strut - Back To Back, Slots, Steel, Electro-Galvanized, 1-5/8" x 3-1/4" x 10'

Category: Steel Back-To-Back Strut

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Fitting, 90 Degree, Height 2-1/4 Inches, Base Length 3-1/2 Inches, Hole Diameter9/16 Inches, Electro-Galvanized Steel

Category: 90 Degree Strut Channel Corner Connectors

4/0 Stranded Copper Conductor to Vertical Flat Steel Surface, Cabled Down at 45° to Vertical Flat Steel Surface, Welding Material: 115

Category: Bonding Connectors

SEA 4440402EN3-05 TWO LIGHT W

SEA 3115209EN3-05 NINE LIGHT

SEA 75436EN3-05 THREE LIGHT C

SGL 65160-05 ONE LIGHT PENDANT CHROME

SEA 3115209-05 NINE LIGHT CHA

VLT 05-00159-RWG 100FT 12/3 C

KNI 92 89 05 PLASTIC AND CARB

FLU 5622-05-M PROBE FAST RESP

FED K2001921B-05 PCBA 240VAC

SEA 4139801-05 ONE LIGHT WALL

SEA 4420204-05 FOUR LIGHT WAL