"2exb75-8"

Keyed, Category 6, RJ45, 8-position, 8-wire universal module. Yellow.

Category: Snap-In Cat 6 Jack Inserts

3/8" SHOCKWAVE™ Impact Nut Driver, Length: 1-7/8", Magnetic Tip

Category: Hex & Socket Insert / Power Bits

Keyed, Category 6, RJ45, 8-position, 8-wire universal module. Green.

Category: Snap-In Cat 6 Jack Inserts

Three Gang Drawn Style Device Box, 58 Cubic Inches, 7-5/8 Inches Long x 4 Inches Wide x 2-1/8 Inches Deep, Drawn Construction with 1/2 Inch Knockouts, with CV Brackets Recessed 7/8 Inches, For use with Conduit

Category: Metallic Gang Boxes

Keyed, Category 6A, RJ45, 10 Gb/s, 8-position, 8-wire universal module. Orange.

Category: Snap-In Cat 6A Jack Inserts

Category 6, RJ45, 8-position, violet, 8-wire universal shielded black module with integral shield.

Category: Snap-In Cat 6 Jack Inserts

Conduit Hardware, Bushings, Insulating, Trade Size: 1 1/4 Inch, Material: Malleable Iron, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, With Bronze Lug, Outside Diameter: 2 1/8 Inch, Width: 5/8 Inch, Grounding Wire Size Minimum: 8 AWG

Category: Threadless Ground Bushings

J-PRO Cable support system, with underfloor clamp for use with pedestal support 7/8 square or 1 1/8 - 1 3/8 in diameter, 1.31 (33.3 mm) max. bundle capacity, nylon 6.6 with metal attachments, black, 50 pc. package quantity.

Category: J-Hook From Wire/Rod & Beam

Werner; Platform Twin Stepladder; Series 7400, Type Iaa, Duty Rating; Ladder Height: 10 Ft; Platform Width: 7-1/4 In; Platform Height: 14-7/8 In; Base Width: 32in; Spread: 67-1/2 In; Material: Fiberglass; Tread: 3 In Wide; Load Capacity: 375 Lb; Rail: 3-1/8 In Front Wide X 1-7/8 In Rear Wide; Flange: 1-3/16 In Front Wide X 1-3/16 In Rear Back Wide; Approx. Cu. Ft. Per Unit: 11.400

Category: 375 Pound Rated Stepladders

Taskmaster Battery Hydraulic 6 Ton 4 Point Open Head Crimping Tool, Crimping Capacity: 1000 kcmil-8 Lugs, 350kcmil-8 Splices; AL: 750 kcmil-8, Pistol Grip, Includes: Tool, (2) Milwaukee Batteries, 1 AC Charger, Shoulder Strap, Carrying Case, Instruction Manual & Specific Control Certificate

Category: Cordless Crimpers

M18 FUEL™ SWITCH PACK™ Sectional Drum System 5/8" Kit, Includes: (1) SWITCH PACK™ Drum w/ Anchor Cable (47-53-2775) (1) 5/8" x 50' Open Wind Coupling Cable w/ RUST GUARD™ Plating (48-53-2775), (1) 5PC Small Cable Head Attachment Kit w/ RUST GUARD™ Plating (48-53-2685), (1) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850), (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812)

Category: Power Cable Fishing Systems

CRO 533SST 1 7/8 BEAM CLMP 3/

Category: Beam Clamps - Adjustable

Cover for Communication/Data, 2" - 1/2" Combo Plug, 2-7/8" x 3-7/8", 1/8" Thick, Brass

Category: Square / Rectangle Recessed Box Covers

OZ-Gedney Type IBC-L-BC Insulated Grounding Bushing With Lug, Size: 1-1/4 IN, Malleable Iron Body, Bronze Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Bright Dip Lug, Zinc Plated Clamping Screw And Set Screws, Connection: Threaded, 150 DEG C, 14 - 4 AWG Grounding Wire, 2-1/8 IN Outside Diameter, 5/8 IN Width, 1-5/8 IN Turning Radius With Lug, Third Party Certification: UL File Number E-24264, CSA 009795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Threaded Ground Bushings

6 Ton Insulated Crimper with 6ID Head and 120V Charger, 1000v Insulation, Brush Guarded, 360° Rotating Head, Crimping Capacity: Standard Strand, 8 AWG - 500 kcmil Cu, 1/0 AWG - 350 kcmil Al, Fine Strand, 8 AWG - 350 Kcmil CuDLO, 8 AWG - 373.3 Kcmil Cu, Crimping Force: Variable 3-6 Ton (30-60 kN)

Category: Cordless Crimpers

3/8 X 12" METAL WOOD PLASTIC 3/8" X 12" AIRCRAFT LENGTH BLACK OXIDE DRILL BIT

Category: Standard General Purpose Drill Bits

16-14 AWG Vinyl Insulated Ring Terminal #8 Stud Vinyl ring terminals are basic tongue ring terminals. Safe and reliable connections because it cannot be disconnected unless the screw is completely removed. Vinyl insulated ring terminals are made of tin-plated copper with brazed seam, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 25 Count WIRE SIZE: 16-14 AWG STUD SIZE: 8 LENGTH: 0.866 WIDTH: 0.334 BRAND EQUIVALENT: Morris Products 01034 Penn Union R4B8 Ilsco 44212-B10

Category: Vinyl Insulated Ring Tongues

PowerMark Gold convertible load centers arrive as main lug, but have the capability to have a main breaker installed. All ABB load centers are rated up to 60 degree/75 degree centrigrade and is suitable for use with service entrance equipment when installed in accordance with electrical code. The TLM812FCUD features space for 8, 1" breakers, 125 A bus ampere rating, a copper bus, an optional door for 6-8 circuit panel, a factory installed ground bar, and a surface enclosure.

Category: 1-Phase Main Lug Copper Bus Load Centers

Cable to Beam Fastener, Type: Hammer-On, Single Run, Flange: 1/8 - 1/4 Inch, MC/AC Size: 14/2 - 10/3, Flex: 3/8 Inch, Steel

Category: Flange Clips

Air Terminal, Imperial Thread. Copper, Bare, 5/8" dia, Blunt, 48", 5/8 UNC Thread.

Category: Lightning Protection Devices

SQUARE U-BOLT, 3 3/8-IN. DEEP, 3/8-IN.-16 THREAD

Category: U Bolts

OZ-Gedney Spec 5 Type C Conduit Body, 1-1/4 IN Hub, Length: 9-1/8 IN, 2-5/8 IN Width, 2-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 32 CU-IN Volume, Third Party Cert

Category: Type C Iron Conduit Bodies

MC BEAM CLAMP

Category: MC/AC Cable to Wire/Rod & Beam

Ranger Strain Relief Straight Liquidtight Cord Connector, 1 IN Trade, 3/4-7/8 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips