"ase 12x12x4"

90-Degree Wireway Elbow, Top Cover Sloped Inward, Material: Stainless Steel, Dimensions: 4" x 4" x 9"

Category: Wireway Elbows

HYSHED SCRW CVR 1PBGX 5X4X4

Category: Stainless Steel Pilot Device Enclosures

Screw-Cover Wiring Trough, Type 12 is used for moist or dirty applications. This Screw Cover Wiring Trough, F4424SC item measures NEMA Type 12 inches with a material of Gray, Steel colored 4.00x4.00x24.00.

Category: NEMA 12 Wire Trough

Wire Trough, Screw Cover, Bulletin F25 (Fiberglass Type 12 & 3R Wireway And Trough), Size/Dims: 4" x 4" x 24", Material/Finish: Fiberglass.

Category: NEMA 12 Wire Trough

Drawn Pushbutton Enclosures, Type 4, 4PB x 30.5mm, Gray, Steel

Category: Steel Pilot Device Enclosures

Flat and Dome Screw Cover, Contoured, Type 4, 10.25x4.00x2.75, Gray, Steel

Category: NEMA 12 Lift-Off Cover Junction Boxes

Lift-Off Clamp Cover Enclosure Type 12, 6.00x4.00x4.00, Gray, Mild Steel

Category: NEMA 12 Lift-Off Cover Junction Boxes

Wireway 90° Elbow, NEMA Type 12, Lay-In, Outside Opening, Steel, ANSI 61 Gray Acrylic Electrocoat Finish, Size: 4 x 4 Inch

Category: Wireway Elbows

Wireway 90° Flush Tee, Size/Dims: 4.00x4.00, Material/Finish: Steel/Gray. For use with Type 1 Hinged & Screw Cover Wireway .

Category: Hinged Cover Wireway

Layin 45-Degree Elbows provide wireway runs with 45-degree turns. Three different elbows available. This 45-Degree Elbow Inside Opening, F44LE45B item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Extra deep, Type 4, Pushbutton Enclosures provide space for deep, contact terminal blocks. This Extra-Deep Pushbutton Enclosure Type 4, E1PBXM4 item measures 1PBx22.5mm 4x4x4.75in with a material of Steel colored Gray.

Category: Steel Pilot Device Enclosures

Fiberglass Wiring Trough, NEMA Type 12 and 3R, Number of Openings: 5, Number of Cover Screws: 12, Material: Steel, Dimensions: 4" x 4" x 60"

Category: NEMA 12 Wire Trough

Lay-In Type 1 Screw Cover Wireway, Straight Section, Size: 4 Inch Wide, 4 Inch Deep, 1 Foot Length, 16 Gauge Steel, Galvanized, No Knockouts

Category: Screw Cover Wireway

Vhd Motion Arm Post Adptr, Bulletin Vm2 (syspend Vertical Interface Arm, Type 4/12), Size/dims: 5.00x4.00x4.00, Material/finish: Steel/paint

Category: Enclosure Mounting Bracket Kits

Lay-in Transposition for rotating open side 90 degrees retaining lay-in feature. This Transposition Sections CW, F44LKT item measures 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Transposition Sections

ENG VJ1614NHWPL2 VJ 1614 W/

Category: Fiberglass Hinged Cover Enclosures

Fiberglass Feed-Through Wireway, Straight Section, NEMA Type 12 and 3R, Dimensions: 4" x 4" x 120"

Category: Screw Cover Wireway

CleanTray 45-Degree Elbows for 45-degree turns in applications that require frequent washdown. This 45-Deg Elbow Outside Cover CleanTray, CT44EOC45SS item measures 4.00x4.00 inch with a material of SS304 finish Brushed.

Category: Wireway Elbows

XD 316SS 42X36X12 3PT LTCH

Ww, 3r, Str. Section, Male, Bulletin F30g (type 3r Wireway And Trough), Size/dims: 4.00x4.00x12.00, Material/finish: Galv/gray

Category: NEMA 3R Wire Trough

Junction Box, Continuous Hinge Cover With Quarter Latch, NEMA 4, 12 x 6 x 4 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 4 Wall Mount Enclosures

Divides wireway into two or three compartments in washdown applications. This Barrier Kit 2 or 3-Compartment, F44B360 item fits 4.00x4.00 inches with a material of Steel colored Gray.

Category: Wireway Barrier Kits

Wireway Tee Fitting, Top Opening, Size/Dims: 4.00x4.00, Material/Finish: Steel/Gray. For use with Type 12, Wireway .

Category: Wireway Tee Fittings

Lay-in Hinged Cover Nipples are used for adjusting wireway length. This Nipple Lay-in Hinged-Cover, F44LN2 item measures 4.00x4.00x2.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples