"it-4"

NSI 4-14-614 ALUMINUM MULTIPL

Aluminum Multiple Connector 4-14 AWG 8 Hole 6 Circuit Multiple connectors are made from eithercopper or aluminum bar and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper or aluminum conductors.

Long Barrel TinnedCopperSplice4 AWG Long Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: Long Barrel Copper Compression Sleeves

Long Barrel TinnedCopperSplice4/0 AWG Long Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: Standard Barrel Copper Compression Sleeves

Compression Lug, Aluminum, 1 AWG, Standard Barrel, 1 Hole, 1/4" Bolt Size, 600 V, Gold Color Code

Category: 1-Hole Aluminum Compression Lugs

4 Wire Polaris4-14 AWG Insulated Multi-Cable Connector Blocks with Allen Head screw Polaris Insul-Tap Connectors are suitable for connecting four wires. Wire entry ports on one side only. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Category: Single Sided Entry Wire Connector Blocks

AL/CU CONN.4-14 AWG 190 CIRCUITS

AL/CU CONN. 4-14 AWG 11 HOLES 9 CIRCUITS

NSI CS-4 FOUR WAY COAXIAL SPL

Heavy Duty Direct Burial Ground Clamps for Rebar for 2.5-4in. Pipe Heavy duty direct burial ground clamps for rebar are used to connect bare copper wire to copper water pipe, ground rods and rebar for bonding. Assembled with copper alloy screws and UL Listed for direct burial in earth and concrete. Can accommodate ground wires up to 2 AWG. cULus Listed 467 Grounding and Bonding.

Category: Bare Wire Ground Clamps

2-Port Black Multi-Tap Pre-Insulated Connector, 2/0 – 14 AWG, 600 Volt, Aluminum, Black

Category: Dual Sided Entry Wire Connector Blocks

NSI IPL1/0-4B 1/0-14 AWG POLA

Category: Single Sided Entry Wire Connector Blocks

NSI 750-4 7.5" YELLOW CABLE T

Category: Non-Releasable Cable Ties

8 Port Aluminum Dual Rated Transformer Connector 500 MCM - 4 AWG Transformer Connectors are made from 6061T-6 aluminum alloy. They are electro-tin plated for low contact resistance. Two NEMA 1/2" holes for easy attachment. Rated 600 volts.

Category: Transformer Lug Kits

Compression Lug, Copper, 2 AWG, Inspection Hole, 1/4 Inch Bolt Size, Brown Color Code

Category: 1-Hole Copper Compression Lugs

6 Port Heavy Duty Dual Rated Transformer Lug 600 MCM - 2 AWG Heavy Duty Dual Rated Transformer Lugs are versatile and reusable set screw connectors made from high strength 6061-T6 aluminum alloy for superior electrical and mechanical performance. Two set screws per wire hole ensure an exceptional connection. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Mounting hole spacing is NEMA 1-3/4". Meets or exceeds ANSI C119.4 Class A. Rated 600V. Temperature rating 90 degrees C.

Category: Transformer Lug Kits

Nsi 600l2 NEMA Panel Lug 600 mcm-2 Awg Mounting Hole 1 3/4 Center To Center

Category: Aluminum Panelboard Lugs

NSI 4T ALUMINUM SINGLE LUG LU

Category: 1-Conductor Aluminum Mechanical Lugs

Professional Vinyl Electrical Tape, 3/4 Inch x 66 Feet, White, Flame-Retardant, UV Resistant

Category: Color Coding Tape

8 Wire Polaris 500 MCM - 4 AWG Insulated Multi-Cable Connector Polaris Insul-Tap Connectors are suitable for connecting eight wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Category: Single Sided Entry Wire Connector Blocks

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

NSI L4N-382 #4 AWG MAX WIRE S

NSI R4-56 4 AWG BARE RING 5/1

2 Hole Long Barrel Copper Compression Lug 6 AWG - 1/4" Bolt - 5/8" Mounting Hole Spacing Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.