"49-16-2793"

Nail Eater« Extreme Impact Bit 9/16" (14.3 mm) x 18". Quickly bore through creosoted and salt-treated utility poles. Resists wear, eats through nails and staples. Self-feeding screw point draws the bit through the wood. 7/16 IN hex shank to fit impact drivers.

16 TFN SOLID BLACK/ORANGE TWISTED

Category: 16 AWG Solid Copper TFN

Device Plate, Galvanized Steel, Duplex Receptacle, For use with Two Gang Recessed Service Floor Box, 90 Cubic Inches, Length 10-1/4 Inches, Width 4-11/16 Inches, Depth 3-3/4 Inches, 3/4 Inch and 1 Inch Conduit Hubs, Cast Iron, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings and Two Gang Recessed Service Floor Box, 90 Cubic Inches, Length 9-15/16 Inches, Width 5-3/32 Inches, Depth 3-3/4 Inches, 3/4 Inch and 1 Inch Conduit Hubs, Cast Iron, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings

Category: Recessed Floor Box Service Fittings

4 Inch Square Partition, 4 Inch x 4 Inch x 1-1/2 Inches Deep, Steel, For Use with Two-Device Square-Cut Tile Wall Cover, 1/2 Inch, 3/4 Inch, or 1 Inch Raised

Category: 4-11/16" Square Metallic Box Partitions

Werner; Platform Twin Stepladder; Series 7400, Type Iaa, Duty Rating; Ladder Height: 4 Ft; Platform Width: 7-1/4 In; Platform Height: 14-7/8 In; Base Width: 21-1/2 In; Spread: 30-1/2 In; Material: Fiberglass; Tread: 3 In Wide; Load Capacity: 375 Lb; Rail: 3-1/8 In Front Wide X 1-7/8 In Rear Wide; Flange: 1-3/16 In Front Wide X 1-3/16 In Rear Back Wide; Approx. Cu. Ft. Per Unit: 3.500

Category: 375 Pound Rated Stepladders

Welded Gang Box, 0-7/16 IN W x 2-1/2 IN D x 4-1/2 IN H, 110 cu-in Capacity, 4 Gangs, 4 Outlets, 12 Knockouts

Category: Metallic Gang Boxes

nVent Cat HP J-Hook Clip to C Purlin Clip, 1/16"û1/4" Flange

Category: J-Hook From Wire/Rod & Beam

Mini-Change« A-Size Flanged Receptacle with Leads, Straight Male, 6 Poles, Length 0.305m , 16 AWG, PVC

Category: Cordset Mating Receptacles

Wood 116020a01f060 Mc 6p Mfe6 6' 16/6 Pvc N-m

Category: 6-Pin Cordsets

Power Distribution Block Cover

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Coax Wire Stripper

Category: Fiber Optic Strippers

Flex Auger Bit, 9/16"x54"

Category: Flexible Steel Drill Bits

Replacement Blades for Adjustable Length Screwdriver, Includes a #1 Phillips and 3/16-Inch Slotted, Removable Shaft Adjusts Within 4-Inch to 8-Inch (10 to 20 cm) Range for Numerous Length Combinations

Category: Multi-Bit Screwdrivers

Floor Box Assembly, Round, Adjustable, Diameter: 4-3/16 Inch, Side Knockouts: (2) 1/2 Inch and (2) 3/4 Inch, Material: Cast Iron

Category: Recessed Adjustable Floor Boxes

B18-CO-EM Box/Multiple Conduit Hanger with Flange Clip, 14-2 to 12-3 MC/AC, 5/16"–1/2" Flange, 3/8" Flexible

Category: Combination Box/Conduit Hangers From Drop Wire/Rod & Beam

3/16" Cabinet Tip Rotary Screwdriver

Category: Slotted Cabinet Tip Screwdrivers

Square Flat Washer. Size: 4" x 4", 1/4" Thickness, 11/16" Hole Diameter, 5/8" Bolt Diameter. Hot Dip Galvanized, Rolled Threads.

Category: Flat Square Washers

Flat Head Carriage Bolt, Steel, 1/4 Inch Diameter, Steel, 100 Pieces

Category: Cable Tray Mounting Hardware

Eaton B-Line series spring nut, 0.85"Hx1.75"Lx1.3750"W, Stainless steel type 316, 5/16"-18 bolt size, 250 lbs load, 450 lbs load

Category: Strut Channel Spring Nuts

Mini-Change« A-Size Flanged Receptacle with Leads, Straight Male, 5 Poles, Length 0.305m , 16 AWG, PVC

Category: 5-Pin Cordsets

Beam Clamp, Push-Type, 1 Inch, 1/8 to 1/4 Inch Flange, 360° Rotation, Steel

Category: Flange-Mount Cable/Conduit Clips

Wire Stripper, Reflex Premium T-Stripper, Capacity: 14 - 24 AWG Solid, 16 - 26 AWG Stranded, Color: Yellow

Category: Combination Wire Stripper / Cutter Tools

STUD NUT WITH SPRING, 3/8-IN.-16 THREAD SIZE, 3/8-IN. NUT, 1 1/4-IN.

Category: Strut Channel Spring Nuts

HangerMate Vertical Mount Screw for Wood, 3/8" Rod, 5/16" Screw, 2 1/4" Screw

Category: Vertical Screw-In Hangers