"f22-250-3v-p industries, llc"

NSIIPLDS-750-6

Category: Dual Sided Entry Wire Connector Blocks

2-Port Clear Multi-Tap Pre-Insulated Connector, 250 MCM – 6 AWG

Category: Dual Sided Entry Wire Connector Blocks

ON OFF - DPST - No-Light Black QuikConnect Rocker Switch

Category: Appliance Rocker Switches

Non-Insulated Male Disconnect, 16-14 AWG, Tin Plated Copper, 600 Volt, Silver, 100/Pack

Category: Male Non-Insulated Wire Disconnects

Winged Wire Connector, Grey, Easy Twist, 18-8 AWG, Bag of 250

Category: Color Coded Twist On Wire Connectors

Nsi Trt-400 Cable Tie Gun minature To Heavy Duty 18-250 Tensile Strength Ties

Category: Cable Tie Tools

Nylon Insulated Male Disconnect, 12-10 AWG, 600 Volt, Yellow, 50/Pack

Category: Male Nylon Insulated Wire Disconnects

Heat Shrink End Cap, 6 AWG - 3/0 AWG, Round, Polyolefin

Category: Heat Shrink End Caps

10 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Heavy Duty Copper C Tap Grounding Connector for 300 MCM to 2/0 AWG APPLICATIONS: Copper "C" Taps ensure positive, all-around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

.500/ .250 Easy-Splice Thin Wall Tubing 48" - 1 Count Flexible flame-retardant, thin wall, general purpose heat shrinkable polyolefin tubing has a 2:1 shrink ratio. Used for electrical insulation, wire harness bundling, wire jacket marking and color coding, it also splices and makes functional terminations. Available in black, white, red, green, blue and clear. Standard packaging is either 6" lengths in blister boxes or in economical 25' spools. UL recognized to Standard 224. Black, white and colored thin wall tubing meet MIL-DTL-23053/5, Class 1. Clear meets MIL-DTL-23053/5, Class 2 and is not flame retardant. Rated 600 Volts, 125 C.

Category: Thin Wall Heat Shrink

Easy-Splice Direct Burial Splice Kit with Rubber Cover 250 - 750 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Direct Burial Datacom Splice Kits

12-10 AWG Nylon Insulated, 50/Pack

Category: Wire Disconnect Adapters

Thin Wall Heat Shrink Kit Assortment: 25Pc - 125 x 6", 25Pc - 187 x 6", 20Pc - 250 x 6", 12Pc - 375 x 6", 7Pc - 500 x 6", 5Pc - 750 x 6", 600V

Category: Heat Shrink Kits

ON OFF - SPST - Nickel .250 QuikConnect BatToggle Switch

Category: 1-Pole Toggle Switches

Cable Clamp Natural .250x.375" 100

Category: Cable Straps

8 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Vinyl Insulated Ring Terminal, 12-10 AWG, #10 Stud, 300 Volt, Yellow, 50 Piece Pro Pack

Category: Vinyl Insulated Ring Tongues

Vinyl Insulated Spade Terminal, #10 Stud, 22-18 AWG, 100 Pc. Pro Pack

Category: Vinyl Insulated Block Fork Terminals

Vinyl Insulated Ring Terminal, 12-10 AWG, #8 Stud, 300 Volt, Yellow, 50 Piece Pro Pack

Category: Vinyl Insulated Ring Tongues

Heavy Duty Copper C Tap Grounding Connector for 4/0 to 1 AWG APPLICATIONS: Copper "C" Taps ensure positive, all around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

NSI HWHS1500-2500-48 1500-250

Category: Heavy Wall Heat Shrink

Toggle Switch Bat On/Off Dpst .250 Quickconnect

Category: 2-Pole Toggle Switches

Fully Insulated Nylon Male Disconnect, 12-10 AWG, 600 Volt, Yellow, 500/Pack

Category: Male Nylon Insulated Wire Disconnects