"57151 mulberry metal products"

Locking Fork Terminal, nylon insulated, funnel entry, metal insulation grip sleeve, 22 - 18 AWG wire range, #6 stud size.

Category: Nylon Insulated Locking Fork Terminals

3/4 Inch Liquidtight Flexible Metal Conduit (LFMC), Type HCX - Extreme (High/Low) Temperature, -76°F to +302°F (-60°C to +150°C), Zero Halogen, Black, 1000 Foot Reel, Galvanized Steel Core, Thermoplastic Rubber (TPE) Jacket, UV Resistant, Extra Corrosion Resistant, Oil Resistant

Category: Liquidtight Flexible Metallic Conduit

QUADEDGE TIP™ Decreases Heat Build Up for Faster Drilling, RED HELIX™ for Rapid Material Extraction, ENHANCED TAPERED WEB™ Increases Flute Durability & Core Strength

Category: Standard General Purpose Drill Bits

3 1/4 OCTAGON CONDUIT OUTLET BOX NM CABLE S SET 1/2 BRACKET

Category: Octagon Metallic Boxes With Brackets

Top Push, Die Cast Aluminum, Compact, 1 N.o./ 1 N.c., 2,720goperating Force, 1mmto 2m/sec Operating Speed, 6.4mm Min. Operating Travel, 1.7mm Pretravel, 910g Return Force

Category: Assembled Limit Switches

Handy Box, 4-Gang, 2-1/2 Inch Deep, Side Knockouts: (2) Concentric, End Knockouts: (8) Concentric, Bottom Knockouts: (8) Concentric, Welded, With Bracket, Steel

Category: Metallic Handy Boxes With Brackets

J-PRO Cable support system, with hammer-on beam clamp for use with flanges 9/16 3/4 (14.3mm 19.1mm) thick, rotates 360 degrees, 0.75 (19.0mm) max. bundle capacity, nylon 6.6 with metal attachments, black, 50 pc. package quantity.

Category: J-Hook From Wire/Rod & Beam

Medium Base Complete, Aluminum Shell Incandescent Lampholder, Removeable Turn Knob, 2-circuit, 1/8 Ips Tapped Bushing W/set Screw, For 3-way 2-filament Lamps -nickel

Category: Metal Shell Incandescent & HID Lampholders

KLE 31739 RECIP SAW BLADES 8

Category: Bi-Metal Reciprocating Saw Blades

OZ-Gedney Type J Conduit Clamp, 2 IN Cable, Cable Type: IMC, EMT, Malleable Iron, Steel Bolt, Finish: Mechanically Galvanized, Dimensions: 3-5/16 IN Length X 2-1/16 IN Depth X 5 IN Height, Dimension D: 3-7/16 IN, 1/2-13 X 1-3/4 IN Length Bolt, Third Party Certification: CSA 009795, Applicable Third Party Standards: CSA C22.2 No.18, For Securing Rigid Conduit, IMC, EMT And Flexible Metal Conduit

Category: Malleable Iron EMT Right Angle Type K-Clamps

Eaton definite purpose contactor, Quick, 40A, 208-240 Vac, 50/60 Hz, Open with metal mounting plate, 15-50A, two- and three-pole, 40A, Contactor, Three-pole, 50A, Binding head screw, Non-reversing

Category: 3-Pole Definite Purpose Contactors

TORK 5441A 4 CONTACTORS 40AM

Category: Time Switch Enclosures

Plasti-bond St Style Knockout Hubs Are Used To Terminate Conduit Runs Through The Wall Of A Sheet Metal Electrical Enclosure. They Are Available With Or Withoutgrounding Lug. Sttb Style Hubs Are "through-bulkhead" Fittings Used To Pass Conduit Runs Through Firewalls Or Bulkheads Up To 1/8" Thick. Stttb Style Hubs Perform The Same Function For Unlimited Wall Thicknesses, (furnished Without Nipples).

Category: PVC Coated Conduit Hubs

3" x 2", Non-Gangable, Square Corner Switch Box with Plaster Ears & Non-Metallic Sheathed Cable Clamps, Drawn, Metallic. Depth: 2-1/2". Clamp Type: CL-26. Bottom Knockouts:(1)1/2”. Cubic Inches: 12.5".

Category: Metallic Switch / Outlet Boxes

Offset Straight Cut Aviation Snips, Cutting Capacity: 1.3" / 18 Gauge Sheet Metal / 22 Gauge Stainless Steel

Category: Aviation Snips

THB UNF 705-TB 2-1/2 INFEMALE

Category: Octagon Metallic Boxes With Brackets

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

Eaton Crouse-Hinds series Switch Box, (1) 1/2", 2, Clamps through beveled corners, 2-1/4", Steel, Ears, Gangable, 10.5 cubic inch capacity

Category: Metallic Switch / Outlet Boxes

InBox™ with Metal Box for New Brick Construction

Category: Recessed Weatherproof In-Use Boxes

CAD CA15XF19 WELD METAL CU XF

Category: Plus Welding Material

Screw-In Snap-Tite Connector, 3/8 Inch, 1/2 inch, KO, Zinc Die Cast, Insulated Throat, With Spring Steel Clip, For Flexible Metal Conduit

Category: Screw-In Flex Connectors

CDY 20MCPNAM

Category: Conduit Hangers From Wire/Rod & Beam

2-Gang Floor Box Kit with Steel Box and Metal Cover with Threaded Plugs

Category: Square / Rectangle Recessed Box Covers

Modular TDX Panel Protector, 300 kA, 1Ph 3W+G Distribution System, 170/276 VAC

Category: Panel Mount Surge Protection Devices