"76672 mulberry metal products"

Switch Box, Gangable, 3 x 2 Inch, Plaster Ears, Armored Cable and Metal Clad Cable Clamps, Metallic, Depth: 2-1/2 Inch, Bottom Knockouts: (1) 1/2 Inch, Side Knockouts: (1) 1/2 Inch Cubic Inches: 12.5

Category: Metallic Switch / Outlet Boxes With Brackets

3x2x3-1/2,swbx,stl,18cu,gngble,clamp

Category: Metallic Switch / Outlet Boxes

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, GUAB Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 5 Inch Opening and (2) 2 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof LB Conduit Outlet Boxes

GRAND SLAM BOX STAB-IT II 8X8X3 WITH KO

Category: Metallic Switch / Outlet Boxes

Squeeze Connector, 1 In Trade Size, 90°, Flex Or Armored Cable Insulated, Material: Zinc Die Cast

Category: 90 Degree Two Screw Squeeze Flex Connectors

Locknut, Bonded With Neoprene Gasket, 4 Inch, Raintight, Steel/Zinc, Installed As Per The National Electrical Code Article 345-Intermediate Metal Conduit and Article 346-Rigid Metal Conduit

Category: Steel Conduit Locknuts

4 Inch Octagon Box, 2 Inch Deep, KOs, Cubic Inches: 20.0, Mounts Under Joist, Steel

Category: Octagon Metallic Boxes

Incandescent Lampholder, Medium Base, Single Circuit, Pull Chain, Aluminum Shell Lampholder, 1/8 IPS Tapped Bushing with Set Screw, Brass

Category: Metal Shell Incandescent & HID Lampholders

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, GUAT Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3-5/8 Inch Opening and (3) 1 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof T Conduit Outlet Boxes

Horizontal Rod Hanger Anchor, Material: Steel, Screw Size: 1/4-20, Shank Length: 1-1/2, Rod Size - Hangers: 3/16 Inch - 16, Head Diameter: 1/2 Inch, Point Type: #5, Application: For Installation in Steel Purlins, Includes: 25 Nuts, 25 Anchors

Category: Metal Mount Threaded Rod Hangers

Flex Connector, 2 Inch, Type: Squeeze, Zinc Die Cast, For Use With Flexible Metal Conduit

Category: Straight Squeeze Flex Connectors

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRC Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (2) 1 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof C Conduit Outlet Boxes

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, GUAD Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3 Inch Opening and (3) 1 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof TB Conduit Outlet Boxes

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, GUAT Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 2 Inch Opening and (3) 3/4 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof T Conduit Outlet Boxes

Traditional Floor Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only, Accommodates All Standard Decora Receptacles, The Flip Lids Are A Double-Hinge Design That Can Open 180 Degrees And Lay Flat, Also Includes Metal Subplate And Pre-Assembled Gasket And Mounting Screws, And Cover Mounting Screws, Brass

Category: Round Recessed Box Covers

Wall Mount Enclosure, Metal Snap Latch Hinged Solid/Opaque Cover, Height: 15.98", Width: 13.98", Depth: 7.81", Usable Depth: 8.27", Polycarbonate

Category: Polycarbonate Hinge Cover Enclosures

40V max XGT® Cordless L.E.D. Lantern/Flashlight, 360° Lantern Mode Provides 710 Lumens, Metal Hang Hook Swivels 360° And Folds Away For Added Convenience, Built-In USB Port For Charging Portable Electronic Devices ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Lantern Flashlights

Conduit Outlet Box, Type GR, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, Unilet, GRLB Hub Type, Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 2.13 Inch Opening, 7.3 Cubic Inches and (2) 1/2 Inch Threaded Hubs, For Use With Threaded Metal Conduit

Category: Explosion-Proof E Conduit Outlet Boxes

Pan-Steel« Self-locking Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, the smooth edges of 304 stainless steel promote worker safety in indoor environments. Heavy cross section, Max bundle diameter: 6in, 20.5in, Tensile strength: 2000, 50pc.

Category: Non-Releasable Cable Ties

Liquidtight Connector, 3/8 inch, 45°, Insulated Throat, Material: Zinc Electroplated Steel

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Pressure Bracket; Set of two for 5in. 6in. recessed down light retrofits

Category: Fixture Mounting Frames & Kits

54 WATT - LED HID REPLACEMENT 5000K MOGUL EXTENDED BASE 100-277 VOLTS

Category: LED Retrofit For HID Lamps

3/4 Inch Liquidtight Flexible Metal Conduit (LFMC), Type HCX - Extreme (High/Low) Temperature, -76°F to +302°F (-60°C to +150°C), Zero Halogen, Black, 100 Foot Coil, Galvanized Steel Core, Thermoplastic Rubber (TPE) Jacket, UV Resistant, Extra Corrosion Resistant, Oil Resistant

Category: Liquidtight Flexible Metallic Conduit

Wedge Grip Clamps, Bail Type: Solid, Conductor Size: Min: 2/0, Max: 4/0

Category: Service Wedge Clamps