"76072 mulberry metal products"

Black Oxide Drill Bit, Thunderbolt®, Size: 25/64", Length: 5-1/8", Flute Length: 3-7/8", Shank: 3/8" Reduced 3-Flat, 135° Split Point Tip, Application: Metal/Wood/Plastic

Category: Standard General Purpose Drill Bits

Electrical Shielding Tape, Scotch, All Metal, Flat, Open-Weave Braid, Unprinted. Size: 1" Width, 15' Length. Color: Gray.

Category: Shielding Tape

Flex Connector, Squeeze, Straight, 1/2 Inch, Malleable Iron, For Use With Flexible Metal Conduit

Category: Straight Squeeze Flex Connectors

Flex Connector, 90°, Squeeze, 3/4 Inch, Malleable Iron

Category: 90 Degree Two Screw Squeeze Flex Connectors

GR Conduit Outlet Box, (2) 1 Inch Threaded Hubs, Aluminum, Explosion-Proof, Dust-Ignitionproof, UNILET For Use With Threaded Metal Conduit, Furnished with Internal Ground Screw and O-Ring

Category: Explosion-Proof L Conduit Outlet Boxes

Bracket/spacer, material: Die-cast zinc, supply includes: 1 set = 1 bracket/spacer, 2 screws M8 x 16 mm, 2 spring lock washers, 2 cage nuts M8, 2 serrated lock washers, 2 metal screws., description: For fastening C rails, punched rails or cable clamp rails (angle section). On the sides, to accommodate square sections or tubes (+ 20 mm). Packaging Unit: 6 pc(s).

Category: Rack Mounting Kits & Hardware

LIMIT SWITCH 600V 10AMP C +OPTIONS,-,metal,plug-in,-20...185 ¦F for standard environment,0.5 Inch NPT Conduit Entrance (screw clamp terminals),1 entry for 1/2 - 14 NPT conforming to ANSI B1.20.1,plug-in,10 A,2(NC-NO),600V,9007,limit switch,plug-in,rotary head,9007C,heavy duty,rotary head,Lever Arm (ordered separately) CW and CCW,NEMA A600/R300,UL Listed - CSA Certified - CE Marked,rotary,standard environment

Category: Assembled Limit Switches

Bullet Camera, High Impact, 1/3 Inch CCD, Resolution: 700 TVL, Min. Illumination: 0.1 Lux, Lens: 2.9 mm Lens, Power: 12 Volt DC, Housing: IP68 Heavy Gauge Die-Cast Metal Alloy, All weather, Power Supply

Category: CCTV & Video Surveillance Analog Bullet Cameras

ATA ORASEL15-22L4

ATA VN12S5-11L 12" VANDAL

The MILWAUKEE® M18 FUEL™ Controlled Torque Impact Wrench with TORQUE-SENSE™ are the industry’s most repeatable impact wrenches. TORQUE-SENSE™ torque control overcomes common variances seen on the jobsite, maintaining target torque better than competitive products that use blow counting algorithms. This performance is enabled by new to world sensors designed in-house by Milwaukee Tool that feed sophisticated machine learning algorithms. Every trigger pull is recorded, and data can be downloaded for customizable reporting to ensure confident installation. This cordless impact wrench is ideal for utility-scale solar projects, where eliminating the 2-step method on the jobsite can deliver up to 3X faster installation speed. Milwaukee offers best-in-class performance and application speed with FUEL™ technology, enabled by POWERSTATE™ brushless motors, REDLINK PLUS™ tool intelligence, and REDLITHIUM™ battery technology.

65mm Gator® Guillotine Remote Cable Cutter, 12V Charger, Cutting Range: Max. Dia With Insulation = 2.55" (65 mm), Jaw Size: Max. Dia With Insulation = 2.55" (65 mm), Can Be Used In Either Hand Held Or Remote Configuration, Tool Comes Standard With Remote Control (BTC3GL), Rigging Harness (BTC3-LH), 12V Makita Charger And Two 4.0Ah Batteries, Hard Side Metal Case

Category: Cordless Cable Cutters

Liquidtight Connector, Straight, 1-1/2 Inch, Insulated, Steel, For Use With Liquidtight Flexible Non-Metallic Conduit

Category: Straight Steel Liquidtight Flex Connectors

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron Body with Aluminum Cover, Unilet, GRCA Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (3) 1/2 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof C Conduit Outlet Boxes

Neoprene High Performance Contact Adhesive, Gray-Green, 1-Quart, Adheres Sheet Metals, Such as Stainless Steel, Aluminum, Cold Rolled Steel and Many Plastics to Numerous Other Substrates

Category: Epoxy Adhesive

Gangable Switch Box, 12.5 Cubic Inches, 3 Inches Long x 2 Inches Wide x 2-1/2 Inches Deep, 1/2 Inch Knockouts, Pre-Galvanized Steel, For use with Conduit

Category: Metallic Switch / Outlet Boxes

Liquidtight Stain Relief Cord Connector, 45°, 1 Inch, Cord Range: .750 to .875 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Switch Outlet/Box, Gangable, 3 x 2 Inch, 1-Gang, 2-1/2 Inch Deep, Side Knockouts: (4) 1/2 Inch, End Knockouts: (2) 1/2 Inch and (4) 21/32 Inch, Bottom Knockouts: (1) 1/2 Inch, Steel

Category: Metallic Switch / Outlet Boxes

Cable Tie w/ Metal Barb, Weather Resistant Nylon, Light-Heavy Cross Section, Black, 11.8 Inch Long, .275 Inch Wide, 3" Maximum Bundle Diameter, 120 Pound Minimum Loop Tensile Strength, Pack of 50

Category: Non-Releasable Cable Ties

Flex Connector, 90°, Squeeze, 1/2 Inch, Malleable Iron

Category: 90 Degree Two Screw Squeeze Flex Connectors

Flex Connector, Type: Squeeze, 2 Inch, Malleable Iron

Category: Straight Squeeze Flex Connectors

Stainless Steel Cable Tie Mounts, 1-Hole, #10 Screw, .90" Long x .40" Wide

Category: Cable Tie Bases

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRCA Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (3) 3/4 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof C Conduit Outlet Boxes

Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Malleable Iron, GUAN Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3 Inch Opening and (2) 1 Inch Threaded Hubs. For Use With Threaded Metal Conduit.

Category: Explosion-Proof N Conduit Outlet Boxes