"el2242-v1b etherwan systems, inc"

2-Gang, (1) 2.150 Inch Hole Single Device Receptacle Wallplate, Standard Size, Material: 430 Stainless Steel, Flush Mount - Color/Finish: Stainless Steel.

Category: 2-Gang Single Receptacle Wallplates

3/4", Knockout Seal, Snap-In, Non-Metallic, Package Quantity: 50.

Category: Non-Metallic Knockout Seals

Klein, MAG2, Screwdriver Magnetizer and Demagnetizer, Orange

Category: Screwdriver Magnetizers

20 Amp, 120/277 Volt, Toggle Single-Pole AC Quiet Switch, Commercial Grade, Grounding, Side Wired - Ivory

Category: 20 Amp Commercial Grade Toggle Switches

Snap-In Connector, QuickPort, GigaMax 5e, CAT 5e, 8P8C, Channel-Rated, Color: Ivory.

Category: Snap-In Cat 5e Jack Inserts

Bushing, 1 to 1-3/8 Inch, Non-Metallic, For Use With Metal Studs

Category: Metal Stud Bushings

Demolition Screwdriver. Heat treated metal shaft runs complete length of handle to metal strike cap to transfer metal strike force. Overall Length: 9". Blade Length: 4". Weight: 0.37 lbs.

Category: Flat Blade / Slotted Keystone Tip Screwdrivers

32-Piece Magnetic Tamper Proof Screwdriver, Includes: TORX (T7, T8, T10, T15, T20, T25, T27, T30, T40), Hex Bits (3/32", 7/64", 1/8", 9/64", 5/32", 3/16"), Metric Hex Bits (2mm, 2.5mm, 3mm, 4mm, 5mm), Spanner Bits (4, 6, 8, 10), Tri-Wing Bits (1, 2, 3, 4)

Category: Multi-Bit Screwdrivers

Wire Stripper, Reflex Premium T-5 T-Stripper, Capacity: 10-18 AWG Solid, 12-20 AWG Stranded

Category: Combination Wire Stripper / Cutter Tools

TKO Hole Saw, Carbide Tipped, Diameter: 7/8" (22 mm)

Category: Carbide Tipped Hole Saws

660W/250V Medium Base One-Piece Glazed Porcelain Outlet Box Mount Incandescent Lampholder, Keyless, Single Circuit, 2 Screws with Case Lip, Top Wired - White

Category: Keyless Incandescent Lampholders

2-Piece Insulated Screwdriver Set, Insulated: Up to 1000V, Length: 8-5/16", Includes: Phillips (#2), Slotted Keystone Tip (1/4")

Category: Insulated Screwdrivers

15 Amp, 120 Volt, Toggle Framed 3-Way AC Quiet Switch, Residential Grade, Grounding, Quickwire Push-In & Side Wired - Light Almond.

Category: 15 Amp Residential Grade Toggle Switches

1-1/4", Snap-In Bushing, Non-Metallic, Package Quantity: 25. For use with all Knockouts.

Category: Knockout Bushings

8-7/16" Heavy Duty Long-Nose Side-Cutting Pliers, Jaw Length: 2-5/16"

Category: Long Nose Pliers

Anti-Short Bushing, Diameter 5/16 Inch, Non-Metallic. For use with Cable Sizes 14-2, 14-3 & 12-2.

Category: Anti-Short Bushings

Snap-In Connector, QuickPort, eXtreme Category 6, 8P8C, Channel/Component Rated, Color: Blue.

Category: Snap-In Cat 6 Jack Inserts

4-Gang Toggle Device Switch Wallplate, Standard Size, Material: Thermoplastic Nylon, Device Mount - Color: White.

Category: 4-Gang Toggle Switch Wallplates

Anti-Short Bushing, Diameter: 3/4", Material: Non-Metallic. For use with Cable Sizes: 8-4, 6-2, 6-3, 6-4, 4-2 & 4-3.

Category: Anti-Short Bushings

Luminaire Disconnect, 2-Wire, 6 Amp/600V Max, Conductor Range: 18 - 12 AWG Solid, Color: Orange. For use with Copper Conductors with 1-Ballast Fixtures. 1 Pack = 25 Pieces

Category: Luminaire Wire Disconnects

Hole Saw; Speed Slot; Arbor Size: 2l, 6l Snap-back, 2l, 3l, 6l Or 7l Standard; Hole Diameter: 3-5/8 In; Metal Cutting Life: Up To 2x; Pipe Entrance: 3 In; Material: Bi-metal. Will Cut Stainless Steel.

Category: Bi-Metal Hole Saws

2-Gang, 1-Toggle 1-Blank Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Box Mount - White.

Category: Blank / Toggle Switch Combination Wallplates

2-Gang Toggle Device Switch Wallplate, Standard Size, Material: Thermoplastic Nylon, Device Mount - Color: Ivory.

Category: 2-Gang Toggle Switch Wallplates

7-Piece Nut Driver Set, Shank Length: 3", Includes: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"

Category: Nut Driver Sets