"mp20"

Dual Technology Ceiling Occupancy Sensor: 24VDC/VAC, 43mA, 360°. The DT-300 works with low voltage momentary switches to provide ON/OFF manual control & contains an isolated relay with N/O and N/C outputs; rated for 1 Amp @ 30 VDC/VAC. Built-in light level sensor – works from 10 to 300 foot-candles.

Category: Passive Infrared Wall Switches

Mobile Label Printer, 1 Inch Wide Label, Includes MP200 Printer, T100X000VPM-BK Continuous Tape Cassette

Category: Portable Label Printers

Occupancy Sensor, Multi-sensing, Ceiling Mount, 360°

Category: Passive Infrared Ceiling Mount Occupancy Sensors

Mini Power Pack, 20 Amp, 120/240/277 Volts AC, 15 Volts DC

Category: General Purpose Fluorescent Strips

Power/Relay Pack, Single Pole, Circuit Protection: 120/277V, Powers Up To 14 Sensors

Category: Occupancy Sensor Power Packs

Occupancy Sensor, 360°, Ceiling Mount, Dual Technology, Line Voltage, Light Level Feature, 120/230/277/347VAC

Category: Passive Infrared Wall Switches

Occupancy Sensor, Dual Technology Sensor, 24VDC,Coverage: 2000 Sq. Ft.

Category: Dual Technology Occupancy Sensors

PXE™ Mobile Label Printer, 1.0" Width, Includes: MP200 Printer, 1 Cassette of T100X000VPM-BK, Hand Carrying Case, Li-Ion Rechargeable Battery Pack, Magnetic Attachments, USB Cable, & Power Adapter (MP-ACS-1)

Category: Portable Label Printers

Harness Identification Marker Plate, 2.00" x 0.75"(50.8mm x 19.1mm), white, standard package.

Category: Tags

Control Unit, 120/277 Volts AC, 24 Volts DC, For Use With ATD, ATU, and ATP Series Ceiling/Wall Mount Sensors

Category: Occupancy Sensor Power Packs

Male contact, 20 AWG. For use with D series crimp terminal inserts

Category: Industrial Rectangular Connector Male Inserts

Mounting Plate, MP mounts to enclosure back or sides for mounting electrical components and wiring. This Mounting Plate, MP, MP2008 item measures 1894x694x25mm with a material of Mild Steel, finish Galvanized.

Category: Enclosure Back Panels

The Form C power packs contain a single pole, double-throw isolated relay with a normally open and normally closed output. These power packs can be used with a standard occupancy sensor to interface with HVAC or other systems. Special attention needs to be made to the load ratings as they vary and are significantly lower than standard power packs. 277 Volts.

Harness Identification Marker Plate, 2.00" x 0.75"(50.8mm x 19.1mm), white, bulk package.

Category: Tags

Mounting Plate, MP mounts to enclosure back or sides for mounting electrical components and wiring. This Mounting Plate, MP, MP2012 item measures 1894x1094x25mm with a material of Mild Steel, finish Galvanized.

Category: Enclosure Back Panels

Mounting Plate, MP, 2000 x 6 mm, Galvanized, Mild Steel

Category: Enclosure Back Panels

The Form C power packs contain a single pole, double-throw isolated relay with a normally open and normally closed output. These power packs can be used with a standard occupancy sensor to interface with HVAC or other systems. Special attention needs to be made to the load ratings as they vary and are significantly lower than standard power packs. 120 Volts.

Eaton pulling grip, Long Length, Flexible Eye, Medium duty, 25900 lbs break, 2.00-2.49" cord diameter, 48" mesh length, Galvanized Steel

20/20 Amp, 1-Pole, Non-CTL Plug-On Replacement Duplex Circuit Breaker, Wire Size #14-4, 10 kAIC, 120/240V AC

Category: Residential Duplex Circuit Breakers

SES MP20LT NLIGHT LIGHT

A SLIM CLAMP TYPE CONSUMPTION CT WITH +/-0.5% ACCURACY (25 M 20 AWG)

Category: Solar Monitoring Accessories

Mounting Plate, MP mounts to enclosure back or sides for mounting electrical components and wiring. This Mounting Plate, MP, MP2016 item measures 1894x1494x25mm with a material of Mild Steel, finish Galvanized.

PANEL FITS 2000X400MM

HOF MP2005 PANEL FITS 2000X5