Meters & Testing

Cl220 Clamp Meter Measures Ac Current And Ac/Dc Voltage, Resistance, And Continuity Via Test Leads, And Temperature With Thermocouple, Auto-Ranging Trms Meter Has A Backlit Lcd On Clamp To Provide Better Viewing In Low Light And Is Cat Iii 600V, Class 2 Double Insulated, Ncvt3P Has Dual-Range Capabilities To Detect From 12 To 1000V Ac Or 70 To 1000V Ac For A Broad Variety Of Low-Voltage Or Standard Voltage Applications, Bright Flashlight Illuminates Work Area And May Be Used Independent Of Ncvt-3P Voltage Detection Function, Et40 Tests Ac Voltages From 12V To 240V And Dc Voltages From 1.5V To >17V To 24V At Four Useful Levels Aligned With Commonly Used Residential Voltages, Et40 Also Has Built-In Test Lead Holders Spaced For Testing Tamper-Resistant Us-Style Outlets And Convenient For Storage, Rt210 Detects Common Wiring Problems In Standard And Gfci Receptacles: Open Ground, Reverse Polarity, Open Hot, Open Neutral, And Hot/Ground Reversed

Category: Clamp Multimeters

Dual Laser Infrared Thermometer, Optical Resolution (Distance-To-Spot) Is 12:1, Measurement Range: -22-Degrees To 752-Degrees F (-30-Degrees To 400-Degrees C), Uses (x1) 9-Volt Battery (Included) ***Not A Medical Device; Thermometer Is NOT Intended For Use On People Or Animals***

Category: Temperature Testers

Fuse, 11A/1000V, Compatible Models: 21-3, 23-III, 25, 26-III, 27, 73-III, 77-IIII, 75-3, 79-III, 83, 83-III, 85, 85-III, 87 (S/N over 65650001), 87-III, 87E-III, 87-IV, 89-IV, 111, 112, 175, 177, 179, 187,189, 863, 865, 867, 867B

Category: Electrical Tester Accessories

Flexible AC Current Probe, 6000A, For Use with the Fluke 430 Series Power Quality Analyzers, Optimized for Current Measurement on Thick & Hard to Reach Conductors, 4-Pack

Category: Electrical Tester Accessories

Clamp Meter, Maximum Rating: 600V AC/DC , Jaw Opening: 1.18" , Features: True-RMS, Current, Phase Sequence Test, Motor Rotation Test, Peak RMS, Temperature (Type K), Resistance, Relative Offset Mode (?), VFD ACV Hz Measurement, Frequency, Capacitance, Continuity / Diode Tests & Automatic Power Off (APO) Includes: (2) 1.5V AAA batteries, test leads and clips, carrying case. CAT IV 300V. CAT III 600V.

Category: AC / DC Clamp Meters

Automotive Back Probe Pin Set, Voltage Rating: 60 VDC, For Use With Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

Category: Test Lead Sets

Flu Ti-sbp3 Battery Ti32

Category: Thermal Imager Accessories

FLK BP1730-BATTERY Li Ion Bat

Category: Power Quality Analyzers

30:1 Infrared/Contact Temp-Gun™, 9V Battery, K-Type Thermocouple, Manual

Category: Temperature Testers

Fluke 190 Series III ScopeMeter® Test Tool, 60 MHz, 2 Channels, Color Screen

Category: Scopemeters

FLU C37XT PROTECTIVE EVA HARD

Category: Electrical Test Kit Carrying Cases

PDT VS-CKP14-6 VeriSafe Insul

Category: Voltage Detectors

FLU FLUKE-TC01A THERM CAMERA

Category: Thermal Imagers

CAT III 1500 V TWISTGUARD TEST LEADS 2MM DIA PROBE TIPS

Category: Test Lead Sets

FLU FLUKE-725 US 725 Series Multifunction Process Calibrator, Measuring Range: 30 V, 100 Mil V, -10 To 75 Mil V For Dc Voltage, 24 Milamp For Dc Current, 0 - 3200 Ohm For Resistance, Resolution: 0.1 Deg C, Accuracy: 0.02 Pct Plus 2 Counts For Voltage And Current, 0.1 Ohm For Resistance , 0.05 Pct Plus 1 Count For Frequency, 10 Pct Forloop Power, Functions: Voltage, Current, Resistance, Frequency, Temperature Forramp And Step, Loop Power: 24 Vdc, Maximum Voltage: 30 V

Category: Process Meters

Premium Electrical Test Kit, Includes: MM320 Manual-Ranging Digital Multimeter with Right-Angle Test Leads, NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight, RT250 GFCI Receptacle Tester with LCD, (2) AAA Batteries, Instructions

Category: Basic Electrical Test Kits

Flu Bp-190 Battery Pack

Category: Scopemeters

Pocket Thermal Imager, 3-1/2" LCD Screen, 9 Hz

Category: Thermal Imagers

Voltage Detector, VoltAlert, Non-Contact, Maximum Rating: 1000V AC, Features: Control Circuit Mode & Flat Tip

Category: Voltage Detectors

Digital Infrared Thermometer, Handheld, Temperature Range: -30°C to 500°C (-22°F to 932°F), Resolution: 8:1.

Category: Temperature Testers

Appliance Load Tester, Plug-In, Capacity: 0-15.0A, 0-1875W,

Category: Power Quality Analyzers

3-Phase/Motor Rotation Tester, Voltage Rating: 100 - 600 VAC (10 - 400 HZ) Nominal For Phase Presence Indication, Amperage Rating: 18 MILAMP Maximum Consumption, 3 Ph Phase, Temperature Rating: 5 - 131 DEG F Operating, -4 To 158 DEG F Storage, Display: Neon Lamps And LEDs, Dimensions: 6 IN Height X 2.8 IN Width X 1.4 IN Depth, Phase Rotary Field Direction: 1 - 600 VAC (2 - 400 HZ), Determination Of Motor Rotation: 1 - 600 VAC (2 - 400 HZ) Requires Greater Than 1/2 Turn, Over Load Protection: 550 V (Between All Terminals), Fuses: 5 X 20 MM, 200 MILAMP/250 V Fuse, Battery: (1) 9 V (IEC 6LR61), Weight: 6.4 OZ (Including Battery), Includes: Carrying Case, Alligator Clip Leads, (1) 9 V Battery, Operating Instructions, Meets IEC-1010 (EN61010) Safety Requirements, CE N12966, CAT III 600V

Category: Phase Sequence Indicators

Fluke 9009-B-156 Dual Range Dry-Block Calibrator, Black

Category: Process Meters

Digital Infrared Thermometer, Handheld, Temperature Range: -30°C to 350°C (-22°F to 662°F), Resolution: 8:1.

Category: Temperature Testers