"lb200a group llc"

U-Line 1-Gang Replacement Receptacle, Number Of Poles: 3, Number Of Wires: 2, Amperage Rating: 20 AMP, Voltage Rating: 250 VAC, Material: Copperfree (4/10 Of 1 PCT Maximum) Aluminum, Nema Rating: NEMA 3, 3R, Mounting: Box, Motor Horsepower: 2 HP, Finish: Epoxy Powder Coat, Dimensions: 3 IN Width X 4.63 IN Height X 3.19 IN Depth, Standard: Class I, Division 1 And 2 Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2 Groups F, G, Class III, UL Listed: E10784, E81751, UL Standard: 1203, 1010, 894, CSA Standard: C22.2 No. 25, C22.2 No. 30, C22.2 No. 42, C22 No.159, CSA Certified: 038644, For ECP Mating Plugs

Category: Explosion-Proof Assembled Switches

EFS Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 20 AMP, Number Of Poles: 2, Actuator: Front Operated, Enclosure: NEMA 7CD, 9EFG, Mounting: Surface Mount With 1/2 IN Feed-Thru Hub, HP Rating: 1 HP At 120 VAC, 2 HP At 240 VAC, Material: Malleable Iron Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 4.63 IN, Width: 3 IN, Depth: 4.53 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1 And 2, Groups C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Arcing Of Enclosed Switches In Ignitable Atmospheres During Connect And Disconnect Operation Of Lighting And Light Power Loads

Category: Explosion-Proof Assembled Switches

EFSR-GFI Series 1-Gang Ground Fault Circuit Interrupter, Voltage Rating: 125 VAC, Amperage Rating: 20 AMP, Frequency Rating: 50 - 60 HZ, Trip Type: 5 MILAMP Trip Setting, Enclosure: NEMA 3, 3R, 7BCD, 9EFG, Material: Cast Copperfree (Less Than 4/10 Of 1 PCT) Aluminum, Finish: Baked Gray Epoxy Clad, Mounting: Surface Mount With 3/4 IN Feed-Thru Hub, Standard: Class I, Group B, Class I, Groups C, D, Class II, Groups E, F, G, Class III, UL Listed: E81751, UL Standard: 943, 1203, For U-Line 20 AMP Receptacles

Category: Explosion-Proof Assembled Switches

Selector Switch Control Station, Type Feed Through, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Voltage Rating 600 VAC, Current Rating 10 Ampere, Operation Type Maintained, Contact Configuration 4NO-4NC, Number of Circuits 4, Number of Positions 3, Operator Type Knob, Box Type Single Gang, Hub Size 1 Inch, Enclosure Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Enclosure Class I Div 1 Group C D, Class I Div 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/7CD/9EFG, Approval UL 508/698/1203, Size 7.03 Inch L x 3.72 Inch W x 6.69 Inch D

Category: Explosion-Proof Assembled Switches

Appleton Eds2129 Contender Eds Series 1-Gang Tumbler Switch, Voltage Rating: 120- 277 Vac, Amperage Rating: 20 Amp, Number Of Poles: 1, Actuator: Front Operated, Enclosure: Nema 3, 7cd, 9efg, Mounting: Surface Mount With 3/4 In Dead-end Hub, Ul Listed, Class I, Division 1, Groups C, D, Class I, Division 2, Groups B, C, D, Class Ii, Division 1 And 2, Groups E, F, G, Class Iii, For use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present

Category: Explosion-Proof Assembled Switches

UNILETS EDSC Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 20 AMP, Number Of Poles: 2, Actuator: Front Operated, Enclosure: NEMA 7CD, 9EFG, Mounting: Surface Mount With 1/2 IN Feed-Thru Hub, HP Rating: 1 HP At 120 VAC, 2 HP At 240 VAC, Material: Malleable Iron Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 4.63 IN, Width: 3 IN, Depth: 4.69 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Group B, As Well As Class I, Groups C And D, Class II, Groups E, F, G, And Class III, For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present

Category: Explosion-Proof Assembled Switches

UNILETS EDSC Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 30 AMP, Number Of Poles: 2, Actuator: Front Operated, Enclosure: NEMA 7CD, 9EFG, Mounting: Surface Mount With 3/4 IN Feed-Thru Hub, HP Rating: 2 HP At 120/240 VAC, Material: Malleable Iron Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 4.63 IN, Width: 3 IN, Depth: 4.69 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Group B, As Well As Class I, Groups C And D, Class II, Groups E, F, G, And Class III, For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present

Category: Explosion-Proof Assembled Switches

Selector Switch Control Station, Type Feed Through, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Voltage Rating 600 VAC, Current Rating 10 Ampere, Operation Type Maintained, Contact Configuration 4NO-4NC, Number of Circuits 2, Number of Positions 2, Operator Type Knob, Box Type Single Gang, Hub Size 3/4 Inch, Enclosure Material Zinc Electroplated Dichromate Epoxy Powder Coated Copper-Free Aluminum, Enclosure Class I Div 1 Group C D, Class I Div 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/7CD/9EFG, Approval UL 508/698/1203, Size 6.51 Inch L x 3.72 Inch W x 6.69 Inch D

Category: Explosion-Proof Assembled Switches

Contender EDSC Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 20 AMP, Number Of Poles: 1, Actuator: Front Operated, Enclosure: NEMA 3, 7CD, 9EFG, Mounting: Surface Mount With 1 IN Feed-Thru Hub, HP Rating: 1 HP At 120 VAC, 2 HP At 240 VAC, Material: Aluminum Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 5.31 IN, Width: 3.72 IN, Depth: 5.31 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1, Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present

Category: Explosion-Proof Assembled Switches

EFSR-GFI Series 1-Gang Ground Fault Circuit Interrupter, Voltage Rating: 125 VAC, Amperage Rating: 20 AMP, Frequency Rating: 50 - 60 HZ, Trip Type: 5 MILAMP Trip Setting, Enclosure: NEMA 3, 3R, 7BCD, 9EFG, Material: Cast Copperfree (Less Than 4/10 Of 1 PCT) Aluminum, Finish: Baked Gray Epoxy Clad, Mounting: Surface Mount With 3/4 IN Dead-End Hub, Standard: Class I, Group B, Class I, Groups C, D, Class II, Groups E, F, G, Class III, UL Listed: E81751, UL Standard: 943, 1203, For U-Line 20 AMP Receptacles

Category: Explosion-Proof Assembled Switches

Selector Switch Cover Assembly, Constructional Feature Explosion-Proof, Dust Ignitionproof, Operation Type Maintained, Contact Configuration 4NO-4NC, Number of Selector Switches 1, Number of Circuits 4, Number of Positions 2, Operator Type Front Operated Knob, Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Enclosure Class I Div 1 Group C D and Div 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/7CD/9EFG,, Used On Selector Switch, Approval UL 508/698/1203

Category: Explosion-Proof Assembled Switches

Explosion-Proof Pushbutton Control Station, Type Dead End, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Voltage Rating 600 VAC, Current Rating 10 Ampere, Legend Emergency Stop, Number of Elements 1, Number of Circuits 1, Contact Configuration 1NO-1NC, Maintained, Universal, Operator Type Front Operated Button, Box Type Single Gang, Hub Size (1) 1/2 Inch, Enclosure Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron Body/Cover, Enclosure Class I Div 1 Group C D, Class I Div 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/7CD/9EFG, Approval UL 508/698/1203, Pushbutton Head Type Red Mushroom Head, Application Hazardous Location

Category: Explosion-Proof Assembled Switches

Selector Switch Control Station, Type Feed Through, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Voltage Rating 600 VAC, Current Rating 10 Ampere, Operation Type Maintained, Contact Configuration 4NO-4NC, Number of Circuits 4, Number of Positions 3, Operator Type Knob, Box Type Single Gang, Hub Size 3/4 Inch, Enclosure Material Zinc Electroplated Dichromate Epoxy Powder Coated Copper-Free Aluminum, Enclosure Class I Div 1 Group C D, Class I Div 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/7CD/9EFG, Approval UL 508/698/1203, Size 6.51 Inch L x 3.72 Inch W x 6.69 Inch D

Category: Explosion-Proof Assembled Switches

Explosion-Proof Tumbler Switch Control Station, Type Dead End, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Voltage Rating 120 to 277 VAC, Current Rating 20 Ampere, Contact Configuration 3-Way, Operator Type Front Operated Lever, Box Type Two Gang, Hub Size (1) 3/4 Inch, Enclosure Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Actuator Material Nylon 6/6, Enclosure Class I Div 1 and 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 7BCD/9EFG, Approval UL 894/1203, Overall Dimension 6.19 Inch W x 4.69 Inch D x 6.13 Inch H, Application Hazardous Location

Category: Explosion-Proof Assembled Switches

Explosion-Proof Tumbler Switch, Type Feed Through, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Voltage Rating 120 to 277 VAC, Current Rating 20 Ampere, Contact Configuration 3-Way, Operator Type Front Operated Lever, Box Type Single Gang, Hub Size 1/2 Inch, Enclosure Material ASTM A47-77 Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Actuator Material Nylon 6/6, Enclosure Class I Div 1 and 2 Group C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 7CD/9EFG, Approval UL 894/1203, Application Designed to Prevent Arcing of Enclosed Switches in Ignitable Atmospheres During Connect and Disconnect Operation of Lighting and Light Power Loads, Use in Classified Areas Where Ignitable Vapors, Gases or Highly Combustible Dusts are Present, Installation in Chemical Plants, Petrochemical Plants, Refineries, Other Process Industries

Category: Explosion-Proof Assembled Switches

Explosion-Proof Photocontrol, Type Single Gang, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Voltage Rating 120 V, Power Rating 1000 VA, Turn ON Light Level 1 to 3 FC, Temperature Rating -30 to 140 Deg F, Mounting 1 Inch Dead End, Enclosure Material Epoxy Powder Coated Malleable Iron Body, Epoxy Powder Coated Aluminum Cover, Enclosure Class I Group B C D, Class II Group E F G, Class III, Size 3 Inch W x 4.81 Inch D x 6.31 Inch H, Application Chemical and Petrochemical Plant, Refinery, other Process Industry, Current Rating 8.3 Ampere, Turn On/Turn Off Ratio 1:3

Category: Explosion-Proof Assembled Switches

Explosion-Proof Manual Motor Starter, Type Dead End, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Motor/Line Voltage 120 to 240 VAC, 32/120/240 VDC, Power Rating 1 HP at 120 to 240 VAC, 1 HP at 120/240 VDC, 1/4 HP at 32 VDC, Number of Poles 2, Material Gray Epoxy Powder Coated Malleable Iron, Conduit Size 3/4 Inch, Enclosure Type NEMA 3, NEMA 3R, NEMA 7CD, NEMA 9EFG, Class I Div 1 and 2 Group C D, Class II Div 1 and 2 Group E F G, Class III, Approval UL 508/698/1203, UL (Canada and US), CSA C22.2, Number of Gangs 1, Application Hazardous Location

Category: Explosion-Proof Assembled Switches

Division 2 Contender Selector Switch, Number Of Steps: 3, Contact Configuration: 2 NO, Legend: Hand-Off-Auto, Standard: UL 508, 698, 1203, 1604, ISA, 12.12.01, CSA C22.2 No. 14-M, C22.2 No. 213-M, C22.2 No. 25, C22.2 No. 30, C/US UL File Number E10449, E81751, Class I, Division 2, Groups B, C, D, Zone 2, Class II, Division 1 And 2, Groups E, F, G, Class III, For Use With Division 2 Contender Series Factory Sealed Boxes

Category: Explosion-Proof Assembled Switches

Selector Switch Control Station, Type Feed Through, Constructional Feature Corrosion Resistant, Voltage Rating 120/240 VAC, Contact Configuration 2NO-2NC, Number of Circuits 2, Number of Positions 3, Operator Type Knob, Box Type Single Gang, Hub Size 1 Inch, Enclosure Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Enclosure Class I Div 1 Group B C D Zone 2, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/3R/4/4X/12, IP66, Approval UL 508/698/1203/1604, CSA C22.2, Size 7.03 Inch L x 3.72 Inch W x 4.05 Inch D

Category: Explosion-Proof Assembled Switches

Explosion-Proof Non-Illuminated Selector Switch, Type Short Bush, Contact Rating 600 VAC 10 Ampere, Operation Type Maintained, Spring Return, Contact Configuration 2NC, Number of Positions 3, Throw Left-Center-Right, Enclosure Material Copper-Free Aluminum, Enclosure Class I Div 1 and 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 4/7BCD/9EFG, Approval UL 1203/E77137, CSA C22.2, Constructional Feature Explosion-Proof, Application Hazardous Location, Number of Cam Location 1

Category: Explosion-Proof Assembled Switches

Appleton Contender EFDB Series 1-Gang 2 Circuit Selector Switch, Number Of Steps: 3, Contact Rating: 10 AMP At 600 VAC, Enclosure: NEMA 3, 7CD, 9EFG, Mounting: Surface Mount With 1 IN Dead-End Hub, Operation: Maintained, Standard: UL 508, UL 698, UL 1203, E10449, E81751 UL Listed, Class I, Division 1 And 2, Groups B , C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Used In Conjunction With Contactors Or Magnetic Starters For Remote Control Of Motors

Category: Explosion-Proof Assembled Switches

Control Station, Type Selector Switch, Pilot Light, Contact Configuration 1NO-1NC, Contact Rating 600 VAC 10 Ampere, Operator Type (1) 2 Position Selector Switch Knob, (1) 120 V Pilot Light, Enclosure Class I Div 1 and 2 Group C D, NEMA 3R/4X/7CD, Material Fiberglass Reinforced Thermoset Polyester, Cable/Conduit Entry 1/2 Inch, 3/4 Inch Dead End Hub, Approval UL, Application Hazard Location, Color Neutral, Number of Selector Switch Circuit 2

Category: Explosion-Proof Assembled Switches