"4x4 single gang"

For covering single receptacles - 1.41" (36mm) diameter. Ivory

Category: 1-Gang Raceway Box Covers & Faceplates

Cm Series Single Gang Angled Fp Iv

Category: 1-Gang Raceway Device Brackets & Plates

Single gang two-piece snap together outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® T45 or LD profile raceway. 5.00in L x 3.26in W x 1.62in H (127.1mm x 82.7mm x

Category: 1-Gang Raceway Device Boxes

Designed especially for use in the installation of signal system and alarm wiring. Base has 1/2" trade size KOs. Larger gang boxes available by special order. Single-gang: 4 5/8" L x 2 7/8" W (117mm x 73mm). Accepts NEMA single-gang standard faceplates. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "vc" or the "WH" color suffix to "WHC" to denote the Canadian versions. White

Category: 1-Gang Raceway Device Boxes

Single gang one-piece deep outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.23in L x 3.48in W x 2.75in H (133.0mm x 88.5mm x 69.8mm). Breakou

Category: 1-Gang Raceway Device Boxes

For power or communication devices in a single compartment. For use with 5507 Series Faceplates, Ortronics TracJack and Series II Modules, Pass and Seymour Activate Series Inserts, and Wiremold Open System Communication Modules. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Orthonics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

Snap-on single gang rectangular electrical/communication faceplate. Used to cover one NEMA standard rectangular electrical outlet. In communication applications, covers one standard rectangular communication module frame, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1"

Category: 1-Gang Raceway Device Boxes

3-sided hanging box. Mounts standard electrical outlets or communication devices with either NEMA standard single gang screw-on or Panduit snap-on faceplates. When used with TGDW divider wall, box separates and fully encloses device to provide cabling separation.

Category: 1-Gang Raceway Device Boxes

For mounting three CM2 Series modules or Pass and Seymour Activate Series devices modules. Ivory

Category: 1-Gang Raceway Device Brackets & Plates

Snap-on single gang 106 duplex electrical/communication faceplate. Used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on single gang rectangular electrical/communication faceplate. Used to cover one NEMA standard rectangular electrical outlet. In communication applications, covers one standard rectangular communication module frame.

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang two-piece screw together outlet box. Box accepts Pan-Way« Screw-On Faceplates or any NEMA standard single gang faceplate. For use withPan-Way« LD profile raceway. 5.19in L x 3.45in W x 1.75in H (131.9mm x 87.7mm x 44.4mm). Breakouts for 1/2in, 3/4in, or 1in diameter conduit, White.

Category: 1-Gang Raceway Device Boxes

Installs commercially available straight blade and locking single receptacles with face diameters of 1.56" - 1.57" (approximately (40mm)) into 3000 Series Raceway. G3007C Device Bracket included. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 1-Gang Raceway Device Brackets & Plates

Single Receptacle Plate, 3000 Series Raceway, Steel, Ivory

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang two-piece screw together round outlet box. Box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

Single gang two-piece screw together round outlet box. Box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit, Interna

Category: 1-Gang Raceway Device Boxes

SINGLE GANG EXTRON MAAP FACE PLATE

Category: 1-Gang Raceway Device Brackets & Plates

Steel, 1-Gang, Single Receptacle Cover, 5500 Series. Size: 1.59" Diameter. Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" d

Category: 1-Gang Raceway Device Boxes

Single gang two-piece screw together round outlet box. Box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit, White.

Category: 1-Gang Raceway Device Boxes

Steel, 1-Gang, Single Receptacle Cover, 5500 Series. Size: 1.59" Diameter. Fog White.

Category: 1-Gang Raceway Box Covers & Faceplates

Steel, 1-Gang, Single Receptacle Cover, 5500 Series. Size: 1.41" Diameter. White.

Category: 1-Gang Raceway Box Covers & Faceplates

For covering single receptacles - 1.41" (36mm) diameter. Gray

Category: 1-Gang Raceway Box Covers & Faceplates