Search results

Spectra RMS Molded Case Circuit Breakers (SE150, SF250, SG600 and SK1200) have a digital, solid state, RMS sensing trip system with field installable, front-mounted rating plugs to establish or change the breaker ampere rating. Adjustable instantaneous with tracking short-time is standard on all frames. The trip system uses digital sampling to determine the RMS value of sinusoidal and non-sinusoidal currents. SGH 2P 600V 600A

Category: 600V Rated Molded Case Circuit Breakers

Breaker, Molded Case, 200 Amp, 600 Volt AC, 22 kAIC, 2-Pole, Thermal Magnetic, Non-Interchangable Trip Unit

Category: 600V Rated Molded Case Circuit Breakers

GED FBV26TE045R2 45A 2P 600Y347 MCCB

Category: 600V Rated Molded Case Circuit Breakers

The TEY is a one-inch wide per pole, compact, "bolt-on" circuit breaker for use on grounded 480Y/277 Vac systems. The bolt-on mounting base accessory makes the TEY suitable for varied applications as a lug-lug breaker. All TEY circuit breakers feature Quick-make / Quick-break mechanisms, common trip bars, and easy to spot trip indication to ensure safety and reliability. TEY breakers are available in 1, 2, and 3 pole versions and can be ordered with auxiliary contact and shunt trip accessories. 70A 3P TEY W/AUX SW 1NO

Category: Molded Case Circuit Breaker Auxiliary Switches

The J600 product line consists of Thermal Magnetic Circuit Breakers, Magnetic Circuit Breakers, and Molded-Case Switches rated up to 600 Amps and 600 Volts AC. These breakers are available with either non-interchangeable trips (designated type TJJ) or interchangeable trips (designated types TJK/THJK). Type TJJ devices ship fully assembled while types TJK/THJK ship unassembled unless specified on the order. TJK breakers are available in two frames, 400 ampere frame (125 to 400 amperes) and 600 ampere frame (250 to 600 amperes). Trip units are not interchangeable between frames. The WL catalog number suffix indicates that the devices come with Cu/Al line and load lugs. TJK6 3 POLE 600V 250 AMP- WL

Category: 600V Rated Molded Case Circuit Breakers

Spectra RMS molded case circuit breakers with microEntelliGuardTM trip units (SG600 and SK1200) offer flexible system protection, metering and communication options required on the most advanced electrical systems. Fully adjustable time-current curves (with three long-time curve shapes, MVT I2t, CB, and Fuse I4t) and optional protective relays provide optimal system coordination and protection. In addition to standard metering, the microEntelliGuardTM trip units are available with ground fault alarm, Reduced Energy Let-Through (RELT), Zone Selective Interlocking (ST/GF/INST), neutral protection, waveform capture, programmable output contacts, advanced metering and direct Modbus communications for integration with EnerVista Viewpoint power system monitoring software. The microEntelliGuardTM trip unit uses the same universal rating plugs and test kit offered for the EntelliGuard TU trip unit as well as common internal accessories used across the entire Spectra RMS family of molded case circuit breakers.

Category: 600V Rated Molded Case Circuit Breakers

Panelboard Enclosure, Galvanized Steel, 76.5 Inch x 8.62 Inch x 5.81 Inch, NEMA 1, For 67.5 Inch - 76.5 Inch Panels, A Series

Category: Panelboard Cans

Busway, Bus Plug, Fusible, 3-Phase, 30 Amp, 600 Volt AC, Type QMR

Category: Fusible Bus Plugs

Busway, Lighting, Unfused Bus Plug, 20 Amp, 2-Pole, 120 Volt AC, Contact A-N

Category: Bus Plugs

Transformer, Dry Type, 15 kVA, 240 x 480 - 120/240, NEMA 2

Category: 15 KVA Dry Type Transformers

A-Series+ Panelboards. Pro-Stock, Unassembled Lighting Panels. Main Breaker Kit. Interior Type: AQU3: 208/120 VAC, 3 Phase. Breaker not included except for (WB˜ kits (where product number ends in (WB˜). (WB˜ kits include a breaker, mounting kit and load-side lugs. Rating plugs must be ordered separately. Note: 400A and 600A breaker kits cannot be used for sub-feed applications in Pro-Stock panelboards. B516 BREAKER KITS: TQD: 6P

Category: Panelboard Main Breaker Kits

HANDLE LOCKING DEVICE

Category: Molded Case Circuit Breaker Locking Devices

Breaker, Molded Case, 150A, 3P, 600VAC, 18kAIC, AdjustableBreaker, Molded Case, 150 Amp, 3-Pole, 600 Volt AC, 18 kAIC, Adjustable Trip Range, TFJ Type

Category: 600V Rated Molded Case Circuit Breakers

The undervoltage release provides automatic circuit breaker tripping when there is a power loss or major dip (to 35PERC-70PERC of rated voltage) in accessory control voltage. AC devices are UL listed for 50-60 Hz. AUV2 Frame Rating Amps 2500

Category: Molded Case Circuit Breaker Undervoltage Releases

Breaker, 200 Amp, 240 Volt AC, 3-Pole, Load Lugs Only, Molded Case, 10 kAIC

Category: 240-277V Rated Molded Case Circuit Breakers

Transformer, Dry Type, 225 KVA, 480 Delta Volt AC, Primary, 208Y/120 Volt AC Secondary, 150D Rise, NEMA 2

Category: 225 - 300 KVA Dry Type Transformers

Disconnect Switch, 30A, 240 Volt AC, 250 Volt DC, 2-Pole, Fusible, NEMA 12, Drip/Dust Tight, Mill Rated

Category: 2-Pole 240 Volt Fused Heavy Duty Safety Switches

Breaker, 200 Amp, 240 Volt AC, 2-Pole, Less Lugs, Molded Case, 10 kAIC

Category: 240-277V Rated Molded Case Circuit Breakers

Transformer, Dry Type, 100 kVA, 240 x 480 - 120/240, NEMA 2

Category: 90 - 145 KVA Dry Type Transformers

Main Breaker Kit, 400 Amp, 3-Pole, 240 Volt AC, 208Y/120 Volt AC, 65 kAIC, for AQU1/AQU3, Panel Boards, with Breaker

Category: Panelboard Main Breaker Kits

150 Amp, 3-Pole, Miniature Industrial Circuit Breaker, Lug In/Lug Out Type, Q-Line Series, 22 kAIC, 240 Volt AC, with Lugs

Category: 240-277V Rated Molded Case Circuit Breakers

GE THQMV175D

Category: 2-Pole Main Circuit Breakers

The product fall within Lockout hasp and padlock category PADLOCKING BRACKET /001 GE

Category: Padlockable Circuit Breaker Handle Locks

Transformer, Dry Type, 15 kVA, 480 Volt Primary - 240 Volt Secondary, 150C Rise, 3-Phase, NEMA 3R

Category: 15 KVA Dry Type Transformers