Search results

Conduit Body, Type TB, 3/4 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type TB Iron Conduit Bodies

Reducing Bushing, Threaded, 2 x 3/4 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Iron Alloy Reducing Bushings

Conduit Bushing, Insulating, 3/4 Inch, Threaded, Copper Free Aluminum, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Conduit Bushing, Insulating, 1-1/2 Inch, Threaded, Copper Free Aluminum, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Conduit Bushings, Threaded, 1-1/4 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

Conduit Bushing, Insulating, 2 Inch, Threaded, Copper Free Aluminum, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Oz-g Tb200 2-in Mall Tb Cond body

Category: Type TB Iron Conduit Bodies

Oz-g 7-350 3-1/2 Mall Bushed nipple

Category: Iron Chase Nipples

OZ-Gedney Type UNY Conduit Union, Trade Size: 1-1/2 IN, 3-1/6 IN Outside Diameter, Length: 3-9/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Tapered FNPT X MNPT, Third Party Certification: UL File Number E-34997 Listed For Class I,

Category: Explosion-Proof Type UNY Unions

OZ-Gedney Type UNY Conduit Union, Trade Size: 2 IN, 3-3/4 IN Outside Diameter, Length: 3-3/4 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Tapered FNPT X MNPT, Third Party Certification: UL File Number E-34997 Listed For Class I, Divis

Category: Explosion-Proof Type UNY Unions

OZ-Gedney Spec 5 Type T Conduit Body, 1/2 IN Hub, Length: 5-3/8 IN, 1-3/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 4 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009

Category: Type T Iron Conduit Bodies

OZ-Gedney Type EYD Vertical Drain/Sealing Fitting, Size: 1 IN, Malleable Iron Body, Seal Cover And Filler Plug, Stainless Steel Drain/Breather, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-3/4 IN Body Diameter X 4-3/8 IN Ove

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Pulling Elbow, Capped, 90°, 1-1/2 Inch, Explosion-Proof, Female/Female, Screw-On Cap, Malleable Iron, For Use in Hazardous/Ordinary Locations For Pulling Conductors and/or Rigid/IMC Conduit

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

OZ-Gedney BC-G Series Flat Top Design Cover, 3/4 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514

Category: Iron Conduit Body Covers

OZ-Gedney Type IBC-L-BC Insulated Grounding Bushing With Lug, Size: 3 IN, Malleable Iron Body, Bronze Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Bright Dip Lug, Zinc Plated Clamping Screw And Set Screws, Connection: Threaded, 150 DEG C, 14 - 4 AWG Grounding Wire, 4-1/16 IN Outside Diameter, 1-5/16 IN Width, 2-5/8 IN Turning Radius With Lug, Third Party Certification: UL File Number E-24264, CSA 009795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Threaded Ground Bushings

OZ-Gedney Type SR9 Gold Seal Strain Relief 90 DEG Connector, Size: 1/2 IN, Conductor Range: 0.2 - 0.3 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 0.5 IN Throat Inside Diameter, 7/16 IN Thread Length, Dimensi

Category: 90° Malleable Iron Cord Grips

OZ-G HBLG2004 2-IN INS GRND BUSH

Category: Threaded Ground Bushings

OZ-Gedney Spec 5 Type T Conduit Body, 3/4 IN Hub, Length: 6-1/8 IN, 1-5/8 IN Height, Malleable Iron, Finish: Hot Dip Galvanized, Connection: Tapered FNPT, 3 (6 AWG) Conductors, 7 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 0

Category: Type T Iron Conduit Bodies

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 3/4 IN, Conductor Range: 0.375 - 0.5 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body,

Category: Straight Malleable Iron Cord Grips

Liquidtight Connector, 45°, 2 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type ME-S Male Enlarger, Size: 5/8 IN, Steel, Finish: Zinc Electroplated, Connection: 3/4 IN FNPT X 1/2 IN MNPT, Dimensions: 1-3/16 IN Maximum Diameter X 1-9/16 IN Length, Third Party Certification: UL File Number E-34997, Class I, Divis

Category: Conduit Enlargers

Cable Support Plug, Type Multiple Segment, Body Type Tapered, Conduit Type Rigid/IMC/EMT, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 3 Inch, Cable Type Non-Armored, Number of Conductors 5 (Different Size), Size 4-1/8 Inch Dia X 3-3/8 Inch H, Material Canvas Bakelite, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19

Category: Iron Rigid Conduit Cable Supports

OZG ECGJH-100-15 1 X 15" FLEX

Category: Explosion-Proof Type ECGJH Couplings

Liquidtight Flexible Conduit Connector, Type Straight Male, Throat Type Insulated with Ground Lug, Trade Size 3-1/2 Inch, Material Zinc Electroplated Malleable Iron Body/Nut, Zinc Electroplated Steel Ferrule, Approval UL 467, CSA C22.2, Used On Flexible Metallic Liquidtight Conduit, Applicable Standard Federal Specification WF-406E, NEMA, Wire Size 1 to 4/0 AWG

Category: Malleable Iron Liquidtight Flex Connectors