Search results

Wireway Reducer, Material: Steel, Dimensions: 6" x 6" - 4" x 6" Sloped Right

Category: Wireway Reducers

Galvanized Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F1212GAGV item measures 12.00x12.00 inches with a material of Steel finish Galvanized.

Category: Wireway Support Hangers

45-Degree Elbow, Inside Cover, Material: Stainless Steel, Dimensions: 6" x 6"

Category: Wireway Elbows

WW, Type 1, Support Hanger, Bulletin F40GF (Galvanized Type 1 Lay-In Wireway Fittings), Size/Dims: 6.00x6.00, Material/Finish: Galvanized

Category: Wireway Support Hangers

Wireway Elbow, 45 Degree, NEMA 1, Lay-In Type, 12 x 12 Inch, Steel/Galvanized Finish

Category: Wireway Elbows

45-Degree Elbow, Outside Cover, Material: Stainless Steel, Dimensions: 3" x 3"

Category: Wireway Elbows

90-Degree Wireway Elbow, Material: Stainless Steel, Dimensions: 4" x 4"

Category: Wireway Elbows

Layin Flat-Cover Type 1 Straight Sections are used for enclosing wire and cable in wireway runs. This Straight Section Layin Flat Cover Type 1 KOs, F88T160GVWK item measures 8x8x60in with material of Steel finish Galvanized.

Category: Screw Cover Wireway

Transition Cover for transitioning from sloped to standard cable tray in frequent washdown areas. This Transition Cover Sloped to Flat Left Hand CleanTray, CTS46TCLSS item measures 4.00x6.00 inch with a material of SS304 finish Brushed.

Category: Wireway Angled Sealing Plates

Transition Cover for transitioning from sloped to standard cable tray in frequent washdown areas. This Transition Cover Sloped to Flat Right Hand CleanTray, CTS44TCRSS item measures 4.00x4.00 inch with a material of SS304 finish Brushed.

Category: Wireway Angled Sealing Plates

EconoTrough, NEMA Type 3R, Raintight Wireway, Material: Galvanized Steel, Dimensions: 10" x 10" x 36"

Category: NEMA 3R Wire Trough

Lay-In Type 1 Screw Cover Wireway, Straight Section, Size: 4 Inch Wide, 4 Inch Deep, 3 Foot Length, 16 Gauge Steel, Galvanized, No Knockouts

Category: Screw Cover Wireway

Lay-in Galvanized Sweep Tees offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F44TGV item fits 4.00x4.00 inches with a material of Steel finish Galvanized.

Category: Wireway Elbow-Tee-Cross Fittings

Wireway 90° Flush Tee, Size/Dims: 10.00x10.00, Material/Finish: Steel/Gray. For use with Type 1, Hinged Cover, Wireway .

Category: NEMA 12 Wire Trough

Wire Trough, Screw Cover, Bulletin F25 (fiberglass Type 12 & 3r Wireway And Trough), Size/dims: 4.00x4.00x48.00, Material/finish: Fiberglass

Category: NEMA 12 Wire Trough

Ww, Type 1, 90? Elbow, Inside, Bulletin F40gf (galvanized Type 1 Lay-in Wirewayfittings), Size/dims: Fits 8.00x8.00, Material/finish: Galvanized

Category: Wireway Elbows

Ww, Type 1, U- Connector, Bulletin F40gf (galvanized Type 1 Lay-in Wireway Fittings), Size/dims: Fits 2.50x2.50, Material/finish: Galvanized

Category: Wireway U-Connectors

Straight Tube Section, Material: Fiberglass, Dimensions: 4" x 4" x 60"

Category: Screw Cover Wireway

Lay-in Galvanized Wall Hangers are used to support a wireway run. This Support Hanger, F88GSHGV item measures 8.00x8.00 inches with a material of Steel finish Galvanized.

Category: Wireway Support Hangers

90-Degree Tee, Top Cover Perforated, Material: Stainless Steel, Dimensions: 3" x 3"

Category: Wireway Tee Fittings

Wireway Reducer, Material: Dimensions: 6" x 6" - 2" x 2"

Category: Wireway Reducers

Enclosure Adapter, Allows The Cable Tray To Be Securely Connected To An Enclosure, Material: Stainless Steel, Dimensions: 2" x 2"

Category: Wireway Panel Adapters

U-Connector, Used to Connect Two Straight Sections of Cable Tray, Dimensions: 2" x 2"

Category: Wireway U-Connectors

Wireway 90° Flush Tee, Type 1, Size/Dims: 8" x 8", Material/Finish: Steel/Galvanized.

Category: Wireway Tee Fittings