Search results

The flat, pre-galvanized metal liner in gray is 24" (609.6 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

Intersection Bend Radius Control, 2" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 2.0" (50 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

The pre-galvanized metal divider wall in gray is 4.0 (102 mm) high. It is used to provide cable separation on the Wyr-Grid® overhead cable tray routing system's pathway sections. It is designed to help route and manage copper, fiber optic, or power cables

Category: Wall Duct Dividers

The black powder coated straight splice connector is 1.57" (39.8 mm) high and quickly joins two 8" (203 mm), 12" (305 mm), or 18" (457 mm) wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the paint of adjacent pathway sections to p

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 24" (609.6 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 26.7" (678.2 mm) long, 2.2" (56.4 mm) wide, and 26.7" (678.2 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 18" (457.2 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 20.7" (525.8 mm) long, 2.2" (56.4 mm) wide, and 20.7" (525.8 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The electro zinc-plated vertical wall mount bracket in silver is .33" (8.4 mm) high, 1.5" (38.1 mm) long, and 1.69" (42.9 mm). It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated bracket is 2.41" (61.2 mm) high, 28.5" (723.9 mm) long, 2.04" (51.8 mm) wide, and 28.5" (723.9 mm) deep. It is designed to support a 24" (609.6 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod d

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 6.0" (152 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated wall mount bracket is 2.44" (61.98 mm) high, 11.27" (286.26 mm) long, 3.12" (79.25 mm) wide, and 11.27" (286.26 mm) ddep. It is used to support the end of the 12" (304.8 mm) Wyr-Grid® Pathway against a wall. The mounting hardware f

Category: Wire Duct Clips / Retainers

The Wyr-Grid® electro zinc-plated, snap-on intersection bend radius control in silver is 4.0" (102 mm) high. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees, crosses, or right angle intersections

Category: Wire Duct Clips / Retainers

The flat, pre-galvanized metal liner in gray is 30" (762 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The flat, pre-galvanized metal liner in gray is 12" (304.8 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The black powder coated wall bracket is 2.44" (61.98 mm) high, 6.05" (153.67 mm), long, 3.12" (79.25 mm) wide, and 6.05" (153.67 mm) deep. It is used to support the end of the 18" (457.2 mm), 24" (609.6 mm), or 30" (762 mm) Wyr-Grid® Pathway against a wa

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Overhead Cable Tray Side Waterfall is designed to maintain a 3in (76mm) bend radius while transitioning fiber optic, power, and copper data cables from the side of the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Wire Duct Clips / Retainers

Intersection Bend Radius Control, 4" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 4.0" (102 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 12" (304.8 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 14.7" (373.4 mm) long, 2.2" (56.4 mm) wide, and 14.7" (373.4 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The black powder coated straight splice connector is 1.57" (39.8 mm) high, 4.67" (118.5 mm) long, and 1.12" (28.5 mm) wide. It quickly joins two 24" (610 mm) or 30" (762 mm)] wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the pai

Category: Wire Duct Clips / Retainers

The black powder coated bracket strut mounting clip assembly in black is 2.27 (57.7 mm) high, 6.50 (165.1 mm) long, and 1.96 (49.8 mm) wide. It allows the Wyr-Grid ® Pathway to be attached directly to standard 1.63 (41.4) wide strut structures. The packag

Category: Wire Duct Clips / Retainers