"square punch"

Keyway Punch, Manual Capacity: 10 GA Diameters: 1/8", 3/16", 7/8" (225mm), 1-7/32" (305mm)

Category: Draw Studs

Standard Quick Draw 90 Driver Kit, Includes: Quick 90 Driver, 1/2" - 2" Slug Buster, Draw Studs, Adapter, Spacer & Case

Category: Hydraulic Punch Drivers

Draw Stud for Slug-Splitter Punches, Length: 5-1/2", Diameter: 3/4"

Category: Draw Studs

1-1/8" Hydraulic Draw Stud Easy Threading - "Dog Point" Tip Helps Eliminate Cross-Threading Hex Key Access For Easy Removal From Tool Laser Markings For Quick Part Identification Use With Greenlee Battery-Hydraulic Knockout Drivers Or 746A Ram Use With Greenlee Punches And Dies

Category: Draw Studs

For 3/4" - 2" conduit size Slug-Buster® and Standard Round knockouts. Use with Greenlee battery-hydraulic knockout drivers or 746A ram

Category: Draw Studs

For 3/4" - 2" conduit size Slug-Buster® and Standard Round knockouts Use with KRW-1 ratchet wrench

Category: Draw Studs

For 3/4" - 2" conduit size Slug-Buster® and Standard Round knockouts Use with Greenlee Quick Draw® manual-hydraulic knockout drivers

Category: Draw Studs

For 3/4" - 2" Conduit Size Slug-Buster® And Standard Round Knockouts Use With Krw-1 Ratchet Wrench

Category: Draw Studs

Short Spacer for 1/2" 10 GA Stainless Steel Conduit

Category: Stud Punch Adapters

7/16" Hydraulic Draw Stud Easy Threading - "Dog Point" Tip Helps Eliminate Cross-Threading Hex Key Access For Easy Removal From Tool Laser Markings For Quick Part Identification Use With Greenlee Battery-Hydraulic Knockout Drivers Or 746A Ram

Category: Draw Studs

Keyway Punch, Sizes: 1/8” (32mm) & 3/16” (48mm) Notches for 7/8”, (225mm) & 1-7/32” (305mm) Holes, Capacity: 10 ga Stainless Steel & Mild Steel, For Use With Any Greenlee Hydraulic Driver

Category: Stud Punch Adapters

Punching Tool Kit, Includes: 11-Ton Tool With Batteries, Charger & Case

Category: Hydraulic Punch Drivers

Punching Tool Kit, Includes: 11-Ton Tool with Knockouts, 1/2" to 4"

Category: Hydraulic Punch Drivers

Punch Unit, Square, 4.125 Inch Length X 4.125 Inch Width Size, Minimum Pilot Hole Diameter: 1.188 IN, Hydraulic, Capacity:10 GA Mild Steel, Hole Size: 4 1/8 IN

Category: Hydraulic Punch Drivers

Knockout Punch Kit, Includes: Driver, Hand Pump, (1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 3-1/2" & 4") Punches & Dies, Draw Studs, Adapter, Spacers, Kwik Stepper Step Bit and Case

Category: Hydraulic Punch Drivers

Draw Stud for Slug-Splitter Punches, Length: 4-1/4", Diameter: 7/16"

Category: Draw Studs

7/16" Short Hydraulic Draw Stud Easy Threading - "Dog Point" Tip Helps Eliminate Cross-Threading Hex Key Access For Easy Removal From Tool Laser Markings For Quick Part Identification Use With Greenlee Quick Draw® Hydraulic Knockout Drivers Use With Greenlee Punches And Dies

Category: Draw Studs

Replacement Punch Sleeve.

Category: Stud Punch Adapters

Keyway Punch Replacement, Sizes: 1/8” (3.2mm) & 3/16” (4.8mm) Notches for 7/8”, (22.5mm) & 1-7/32” (30.5mm) Holes, Capacity: 10 ga. Stainless Steel & Mild Steel, ***Replacement Punch Only/See Item # 1800331 For Full Assembly***

Category: Stud Punch Adapters

Hydraulic Driver Punch Set, 1/2" x 2", Driver, Hand Pump, Slug-Buster Punches, Dies and Draw Studs for 1/2 through 2 Conduit, Adapter, Spacers, Kwik Stepper Step Bit and Plastic Case

Category: Hydraulic Punch Drivers

Internal Stud Adapter 3/4" (19 mm) x 3/8" (9.5 mm).

Category: Stud Punch Adapters

7/16" Manual Draw Stud Easy Threading - "Dog Point" Tip Helps Eliminate Cross-Threading Use With Greenlee Punches And Dies And Manual Tool

Category: Draw Studs

SSP KO Punch Replacement Draw Stud, Length: 2-13/16", Diameter: 3/8".

Category: Stud Punch Adapters

Punching Tool Kit, Includes: LS50L Battery Driver, (1) 18V Li-Ion Battery, (1) 120V Battery Charger, (1) Spacer (1924AA), (1) 3/4-16 x 4" Drawstud (31872), (1) 3/8 x 4.8" Drawstud (20963).

Category: Hydraulic Punch Drivers