Search results

Easy-Splice In-Line Gel Splice Kit with Connector, 2 - 4/0 AWG, Black, 1000 Volt

Category: Low Voltage Gel Filled Splice Kits

insulation Piercing Connector 350-1/0 Main, 350-1/0 Tap

Category: Splices - Insulation Piercing

Easy-Splice Direct Burial Splice Kit with Rubber Cover 6 AWG - 350 MCM Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Direct Burial Datacom Splice Kits

NSI ESGHS-N H-TAP GEL SPLICE

Category: Low Voltage Gel Filled Splice Kits

easy-splice Wrap-around 250 - 750 Mcm Conductor Size 14"

Category: Low Voltage Heat Shrink Splice Kits

12-10 AWG Bare Spade #10 Stud, 50/Pack

Category: Direct Burial Datacom Splice Kits

easy-splice Wrap-around 500 Mcm - 6 Awg Conductor Size 8"

Category: Low Voltage Heat Shrink Splice Kits

Easy-Splice Direct Burial Roll-On Splice Sleeve for 250 - 600 MCM

Category: Low Voltage Direct Burial Splice Kits

EASY-SPLICE WRAP-AROUND 4/0 4IN

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Wrap-Around UF Splice Kit for 14/2 - 8/3 with Ground Easy-Splice Wrap-Around UF Splice Kit provides a quick and convenient method of splicing underground feeder (UF) cable. Convenient wrap-around design and fast installation. No heating or waiting for compounds to cure. The unique sealing gel entirely encapsulates the splice, completely sealing out moisture and other contaminants. Kit includes connector and closure. Rated for 600V applications.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice H Tap Gel Splice Cover for 6 - 2 AWG The Easy-Splice low-voltage H-Frame closure insulates and seals low-voltage cable-taps and splices made with H-frame compression connectors. The closure utilizes sealing gel material to seal and protect the connection from moisture ingress, corrosion and pollution. To install, simply place the connection on the closure and press the closure together. The low-voltage H-frame closure is ideal for both underground and overhead applications and is especially useful for street lighting applications. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C, 1,000 volts, UV resistant. The Easy-Splice H tap gel splice covers do NOT include connector. Approved Connectors: Blackburn WR9 Burndy YPC2A8U Homac UB214 NSi Industries WR9 T&B 63105

Category: Low Voltage Gel Filled Splice Kits

Insulation Piercing Connector 750 MCM - 3/0 AWG Insulation piercing connectors are made for use with copper-copper, copper to aluminum and aluminum to aluminum applications. They are safe to use and are completely insulated, no need to strip wire. They can be installed on energized conductors with no contact at any point. No spacer required between connections. Exclusive "turbo spacer" keeps tap side open while main conductor is being tightened. Watertight and corrosion-free.

Category: Splices - Insulation Piercing

insulation Piercing Connector 750-250 Main, 500-250 Tap

Category: Splices - Insulation Piercing

Easy-Splice Direct Burial Splice Kit with Rubber Cover 14 - 2/0 AWG Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Low Voltage Direct Burial Splice Kits

insulation Piercing Connector 4/0-2 Main, 2/0-6 Tap

Category: Splices - Insulation Piercing

Insulation Piercing Connector, Main Conductor Range: 2 AWG - 4/0 AWG, Tap Conductor Range: 4 AWG - 4/0 AWG, Voltage: 600V, Copper Current Rating: 405 Amp, Aluminum Current Rating: 315 Amp.

Category: Splices - Insulation Piercing

PowerGel sealing gel filling, operates in SF6 and insulating liquids • Fast and simple to install • Easy re-entry

Category: Low Voltage Gel Filled Splice Kits

insulation Piercing Connector 250-1 Main, 4/0-4 Tap

Category: Splices - Insulation Piercing

PowerGel sealing gel filling, operates in SF6 and insulating liquids • Fast and simple to install • Easy re-entry

Category: Low Voltage Gel Filled Splice Kits