"terminal blocks"

Distribution Block, Type BDB, 1 Pole, 6 AWG - 350 MCM, Aluminum

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 3 Pole, Open Style 14-2/0 AWG (Run), 14-2 AWG (Tap), Hole layout-1(Run)/6(Tap)

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 1 Pole, Finger-Safe, Flex Rated

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, Versipole Series, 175 Amp, 3 Pole, 600 Volt, Aluminum/Tin

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 1-Pole, (1) Run/Tap, 14 - 2/0 AWG, 175A, Medium

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 1 Pole, Aluminum, 310 Amp/Pole, #6 AWG- 350 kcmil(Run), #14-#4 AWG(Tap)

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 1-Pole, (1) Run/Tap, 6 AWG - 350 MCM, 310A

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code«. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs. The MPDB series is offered in three size categories: miniature (MPDB62 and MPDB63 series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69 series), in both aluminum and copper. 1 wire in 1 wire out 3 poles 310 amps AL INT size.

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 3 Pole, 2 to 14 AWG, 175A, 600VPower Distribution Block, Aluminum, 3 Pole, 2 AWG To 14 AWG, 175 Amp, 600 Volt, CU/AL Rated

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 2 Pole, Stud/Stud, 3/8-16 x 1-1/8", 400A, 600VPower Distribution Block, Intermediate Copper, 2 Pole, Stud - Stud, 3/8-16 x 1-1/8 inch, 400 Amp, 600 Volt, CU/AL Rated

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs.

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

BUS NSS3-BK BLOCK NYLON NSS3

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, Adder, Large Aluminum, 380 Amp CU, 310 Amp AL, 4 AWG - 500 MCM, Line and Load, 1 In/1 Out

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Splicer Block, 175A, 600V AC/DC, 3-Pole, (1) In/Out, (1) 14 - 2/0 AWG Line Side, (1) 14 - 2/0 AWG Load Side

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, 1 Pole, Open Style, 2 - 6 AWG (Run), 350 MCM - 2/0 AWG (Tap), Aluminum

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Marathon; Power Stud Block; Wire Size: Line Side: Listed Ring Lugs Or Bus Bars,load Side: Listed Ring Lug Or Bus Bars; Voltage Rating: 600 Vac/dc; Amperage Rating: 200 Amp; Material: Connector: Tin Plated High Conductivity Copper; Insulator Base: Phenolic; Threaded Stud: Tin Plated Brass; Hex Nut: Nickel Plated Brass(1 Supplied Per Stud); Size: 2.750 In Length X 2.880 In Width X 1.780 In Heigth;maximum Insulator Base Temperature: 150 Deg C Ul Rti; Flammability Rating Of Insulator Base: Ul 94v-0; Accessories: Cover: Clear Protective Plastic Cover. Catalog Description Cc142x (x Numbers Of Poles: 1, 2 Or 3), Marking Strip: White Vinyl Strip To Mark Circuits. Supplied With Mounting Screws; Storage And Transportation Temperature Range: -35 Deg C To 110 Deg C; Touch Protection: Ip-10 (iec 529); Number Of Poles: 3; Short Circuit Current Rating: 10000 Amp

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

M-thn 1323122 Power Blocks

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

310A PWR STUD BLOCK

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

ILS PDH-11-2/0-A ALM2/0-142/0

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

ILS PDH-11-2/0-2 ALM2/0-142/0

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

ILS PDH-11-2/0-1 ALM2/0-142/0

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

2CKT POWER BLOCK

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

ILS PDH-14-2/0-A AL MEC2/0-14

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Power Distribution Block, Line Stud 3/8-16 x 1-3/16, Load Stud 3/8-16 x 1-3/16, 1 Port Per Pole Line Side, 1 Port Per Pole Load Side, 3 Pole, UL, CSA, Includes Cover

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks