"ab-1010uc the austin co."

Used for supporting the 2x2 and 4x4 Fiber-Duct™ Systems from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. For 5/

Category: Heat Cable Brackets & Clips

The epoxy applied cable tie swivel mount in natural is affixed with user supplied EMA epoxy. It is 1.13" long x 1.13" wide (28.7 x 28.7 mm) and has an aluminum base and a nylon mount. It is used with miniature, intermediate, and standard cable ties. It is

Category: Cable Tie Bases

Conduit entrance end fitting. This power rated two-piece fitting is designed to accommodate the entrance of 1/2" conduit or align with knockouts on surface mount electrical boxes. For use with LD3/LDPH3 and has breakouts available to work with LD5/LDPH5 a

Category: 2-Piece Non-Metallic Raceway End Fittings

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in red premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.84" (21.3 mm

Category: Female Nylon Insulated Wire Disconnects

Optional cover for the outside vertical 45° angle fitting FROV4524X4BL. Snap-on feature allows cover to be installed and removed with no tools required.

Category: 2-Piece Non-Metallic Raceway Covers

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 316 AISI stainless steel with a fold-over lock, it is ideal for severe weather, intense UV rays, high vibration and galvanic corrosion. Low-profile buckle, 18"L (45

Category: Non-Releasable Cable Ties

The vibration resistant female disconnect is made of brass and is tin-plated. It is fully insulated in a red, nylon housing. It has a tab size of 0.110 x 0.020" (2.8 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.71" (18.0 mm) lon

Category: Female Nylon Insulated Wire Disconnects

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 316 AISI stainless steel with a fold-over lock, it is ideal for severe weather, intense UV rays, high vibration and galvanic corrosion. Low-profile buckle. 18"L (45

Category: Non-Releasable Cable Ties

Protects against Knife Injuries on the Job, Cleanly Strips Cu RHW/RHH/USE Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

Protects against Knife Injuries on the Job, Cleanly Strips Cu RHW/RHH/USE Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

Front/Rear Plinths, PF allow cabling without any restrictions and creates extra space under the enclosure. This Front/Rear Plinths, PF, PF2060 item measures 200x598x63mm with a material of Zinc Plated, Mild Steel, color Umbra Gray.

Category: Enclosure Housing Bases

HR Top-Mount Filter Fans bolt in place to the top of enclosure ensuring a tight seal. This Replacement Gasket is for HR16 Top-Mount Filter Fans.

Category: Enclosure Louver Plate Filters

118" Guide Rail For Use With Makita Plunge Saw, Interacts With The Saw Base And Engineered To Deliver Smooth, Dead-On Straight Or Bevel Cutting

Category: Track Saws

Test + Map™ Remote #4 for Scout® Pro 3 Tester, Cable Tester Replacement Remote Identifies, Tests & Maps A Location In One Step When Used With The Scout® Pro & Commander® Series Of Testers (Sold Separately), Test Voice (RJ11/12), Data (RJ45) & Video (Coax F-Connector) Terminated Cables

Category: Network Cable Testers

Test + Map™ Remote #6 for Scout® Pro 3 Tester, Cable Tester Replacement Remote Identifies, Tests & Maps A Location In One Step When Used With The Scout® Pro & Commander® Series Of Testers (Sold Separately), Test Voice (RJ11/12), Data (RJ45) & Video (Coax F-Connector) Terminated Cables

Category: Network Cable Testers

Test + Map™ Remote #11 for Scout® Pro 3 Tester, Cable Tester Replacement Remote Identifies, Tests & Maps A Location In One Step When Used With The Scout® Pro & Commander® Series Of Testers (Sold Separately), Test Voice (RJ11/12), Data (RJ45) & Video (Coax F-Connector) Terminated Cables

Category: Network Cable Testers

Test + Map™ Remote #7 for Scout® Pro 3 Tester, Cable Tester Replacement Remote Identifies, Tests & Maps A Location In One Step When Used With The Scout® Pro & Commander® Series Of Testers (Sold Separately), Test Voice (RJ11/12), Data (RJ45) & Video (Coax F-Connector) Terminated Cables

Category: Network Cable Testers

C-H CMB2424B200BTS 3/4 in Typ, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

An Aluminum Complex Premium Grade Nsf H1 Registered Grease For Use In Food Production And Processing Industries. The Nlgi Grade 2 Multi-purpose Lubricant Is White In Color And Has A Smooth Buttery Texture. Recommended For High Temperature Applications. Me

Category: Multi-Purpose Lubricant

The masonry push barb cable tie mount in black, made of impact modified, weather-resistant nylon 6.6 uses a fir tree hole mounting method. It requires a hole diameter of 0.19" (4.8 mm) and is designed for use in indoor and outdoor environments. It is used

Category: Cable Tie Bases

Eaton meter socket, Resi type cover, 200A, Under, Solid top, #6-350 kcmil, 4-jaw, 1-phase, #8-350 kcmil, Horn bypass, Gnd conn (#14-#2 Cu), Triplex, 3-wire, Ringless, 600 Vac, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass