"868strr-aq walter kidde portable equipment inc"

2 inch x 2 inch x 10 foot section of wiremesh cable tray constructed of precision engineered high quality welded steel wire and can be adapted to fit any installation on-site Our patented UL Classified painted wire tray is classified as an EGC Equipment Grounding Conductor

Category: Straight Wire Basket

EDW 869STRA-N5 HORN 120VAC

Category: Fire Alarm Horn & Strobe Combination Devices

6" X 1000' Underground Tape 4 Mil High Volt - Yellow

Category: Underground Tape

Rack-Mount Angles, fits A=30.00, Steel

Category: Enclosure Mounting Bracket Kits

A2 CUT KNIT DIPPED GLOVES S 2-PR

Category: Dipped Gloves

OSHA Table 1 Compliance (With 8960-20), Works on Drill Bits or Core Bits Up to 6" in Diameter, Sticks to Ground or Wall When Attached to An Extractor

Category: Cordless Dust Extractors

Underground hazard tape, 6.00" H x 1000' length, 'Caution electric line buried below' (legend), polyethylene, black/red, 1 pc. package quantity.

Category: Detectable Underground Tape

Stranded Conductor for Lightning Protection, Aluminum, Smooth Weave, 98.64 kcmil

Category: Lightning Protection Devices

Eaton B-Line series utility cabinets, NEMA 1, ANSI 61 gray, Protects against contact with enclosed equipment, Type 1 telephone termination cabinet, Utility cabinets, Type 1 telephone termination cabinet/surface mount, 14 gauge

Category: NEMA 3R Telephone Cabinets

Eaton B-Line series runway to rack support kit, Mounting plate, J bolt and 5?16-18 hardware included, 3" upright network equipment rack top plate runway support kit, ASTM A36 structural steel, Telco gray powder coat

Category: Cable Tray - Runway Support Kits

Secure Fit, Compatible with MILWAUKEE® Hard Hats, Adjustable Strap

Category: Hard Hats

Eaton QC GFCI circuit breaker, Equipment protector, 30 mA Trip sensitivity, 50 A, 10 kAIC, Two-pole, 120/240 V, Non-Interchangeable, Cable-in/cable-out, Q7, Breaker type QCGFEP

Category: Cable-In / Cable-Out Ground Fault Circuit Breakers

MMM 1411-XR EXT RANGE 5 DISK

Category: Electronic Ball Markers

CAD EGBA12224BB BAR GRD BUS 1

Category: Welded Equipment Ground Bars

CAD EGBA12424CC BARRA P/TIERR

Category: Welded Equipment Ground Bars

CAD EGBA14206SS BAR GRD BUS 1

Category: Welded Equipment Ground Bars

MMM 1438-XR/ID ID NEAR-SURFAC

Category: Electronic Ball Markers

AIR BUTTON

Category: Communication Receivers

Lockout Padlock, Keyed Alike, Steel, Shackle: 2 inch

Category: Padlocks

Provides secure, accessible route for cables spilling out from vertical tee to rack mounted equipment. Kit includes 6ft length of 4x4 capacity hinged duct, 6ft length of 4x4 hinged duct cover, one end cap for 4x4 hinged duct, three FZBA1.5X4 adjustable Z

Category: Hinged Cover Wireway

Write-on safety tag, 3.00" W x 5.75" H, danger header, 'Do not operate..' (legend), semi-rigid vinyl, red and black/white, 5 tags and ties/package.

Category: Lockout Tags

Primary output/input device for power connection between primary and secondary switchboard, or for machine or industrial equipment. Power Block SB2C250, Copper.

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Hasp with 1.50" (38.1mm) diameter jaw. ""

Category: Lockout Hasps

Eaton Crouse-Hinds series ETC power relay, 10A, 60 Hz, Copper-free aluminum, 3/4", Relay for horn signal, 115 Vac

Category: Intercom Master Stations