"wl-sleeve"

The thermal transfer military grade printable heat-shrink label in yellow is two-sided with a 1/4" (6.4 mm) diameter and made of 3:1 flattened polyolefin. It is 2.0" wide and 0.44" high (50.8 x 11.1 mm). The heat-shrink sleeve is designed to provide a cle

Category: Heat Shrink Wire Marker Labels

Fork Terminal, nylon insulated, metal insulation grip sleeve, 22 - 18 AWG wire range, #8 stud size.

Category: Nylon Insulated Standard Fork Terminals

The thermal transfer military grade heat-shrink label in white is single sided with a 1/4" (6.35mm) diameter and made of 3:1 flattened polyolefin. It is .75" (19.1mm) wide and .44" (11.2mm) high. The heat-shrink sleeve is designed to provide a clear, reli

Category: Heat Shrink Wire Marker Labels

The thermal transfer military grade heat-shrink label in yellow is two-sided with a 1/8" (3.2 mm) diameter and made of 3:1 flattened polyolefin. It is 2.0" wide and 0.25" high (50.8 x 6.4 mm). The heat-shrink sleeve is designed to provide a clear, reliabl

Category: Heat Shrink Wire Marker Labels

The thermal transfer military grade heat-shrink label in white is single sided with a 3/16" (4.76mm) diameter and made of 3:1 flattened polyolefin. It is .75" (19.1mm) wide and .34" (8.6mm) high. The heat-shrink sleeve is designed to provide a clear, reli

Category: Heat Shrink Wire Marker Labels

The thermal transfer military grade heat-shrink label in white is single sided with a 3/16" (4.76mm) diameter and made of 3:1 flattened polyolefin. It is 1.5" (38.1mm) wide and .34" (8.6mm) high. The heat-shrink sleeve is designed to provide a clear, reli

Category: Heat Shrink Wire Marker Labels

30 Amp Watertite« Pin & Sleeve Connector with Flip Lid, 3 Pole/4 Wire, 3° 480V, Red

Category: 3-Pin Cordsets

3MÖ 8440 Series Cold Shrink Silicone Insulator is an insulating sleeve that is specially formulated from high temperature silicone rubber for moisture protection. It maintains resiliency and pressure, even after years of aging and exposure. This insulator ensures top moisture sealing for medium voltage, air insulated connectors and lugs. It offers resistance against acids, alkalis, fluid splashes, ozone, ultraviolet light and fire. This insulator is ideal for use in sheath repairs and electrical aircraft cables and it provides insulation for inline conductor transition connectors. RoHS 2011/65/EU Compliant.

Category: Low Voltage Cold Shrink Connector Insulators

Heat Shrink Cable Sleeve, Heavy-Wall, Typical Cable Range: 2.1" - 4.8", Expanded/Recovered I.D.: 6.00/1.80, Length: 48", Color: Black.

Category: Heavy Wall Heat Shrink

3m(tm) Medium-wall Cable Sleeve Imcsn-1700-48a, 4/0-400 Kcmil, 4 Ft. Length, 20per Case

Category: Medium Wall Heat Shrink

Insulated ferrules, single wire red DIN end sleeve on reel, (1.00mm2), 8mm Pin Length.

Category: Single Insulated Ferrules

Rubber Goods Cleaner, 1-Gallon, Water-Based Cleaner For: Removing Grease, Dirt, Carbon, Creosote, and Other Grimes From Insulating Blankets, Lineman’s Gloves, Rubber Sleeves, Jumper Cables, Hot Jumpers, and Line-hose

Category: Rubber Goods Cleaner

Heat Shrink Tubing, 55/15-750

Category: Heat Shrink Repair Kits

Acceptor Series Plugs And Receptacles Ugr Interchangeable Blade St

Category: 20 Amp Pin & Sleeve Receptacles

HDX Fiber Adapter Plate, OM1 & OM2, Duplex SC (beige), 6 fibers, Phosphor Bronze Sleeve

Category: Fiber Distribution Enclosures

HDX Fiber Adapter Plate, OM3 & OM4, Duplex SC (aqua), 6 fibers, Zirconia Ceramic Sleeve

Category: SC Fiber Distribution Plates

Hollow-Shaft Nut Driver With A Standard 5/16-Inch Hex Socket, Heavy-Duty Shaft And Handle To Withstand The Torque For Demanding Applications, Through-Handle, Full Hollow Shaft For Torquing Hex Nuts Onto Threaded Rod Of Any Length, Cold-Forged Steel Wrench-Assist Hex Shaft For Heavy-Duty Applications, Color-Coded And Dome-Stamped Handle For Easy Identification Of Different Sizes, Rare-Earth Magnet Protected By A Brass Inner Sleeve And Strike Plate To Prevent Damage To The Magnet, Cushion-Grip™ Handle For Greater Torque And Comfort, 6-Point Hex To Maximize Driving Contact Area On The Fastener

Category: Magnetic Tip Hollow Shaft Nut Drivers

Hollow-Shaft Nut Driver With A Standard 3/8-Inch Hex Socket, Heavy-Duty Shaft And Handle To Withstand The Torque For Demanding Applications, Through-Handle, Full Hollow Shaft For Torquing Hex Nuts Onto Threaded Rod Of Any Length, Cold-Forged Steel Wrench-Assist Hex Shaft For Heavy-Duty Applications, Color-Coded And Dome-Stamped Handle For Easy Identification Of Different Sizes, Rare-Earth Magnet Protected By A Brass Inner Sleeve And Strike Plate To Prevent Damage To The Magnet, Cushion-Grip™ Handle For Greater Torque And Comfort, 6-Point Hex To Maximize Driving Contact Area On The Fastener

Category: Magnetic Tip Hollow Shaft Nut Drivers

Insulator for Male Plug, Cam-Type, Detachable, Cable Range- 1/0 - 4/0 AWG, 16 Series Taper Nose

Category: Male Detachable Plug Taper Nose Cam Connectors

Insulated ferrules, single wire black DIN end sleeve on mini-reel, 16 AWG (1.5mm²), 0.31 (8.0mm) pin length.

Category: Single Insulated Ferrules

Insulated ferrules, single wire red DIN end sleeve on mini-reel, (1.0mm²), 0.31 (8.0mm) pin length.

Category: Single Insulated Ferrules

Rubber Goods Cleaner, 5-Gallon, Water-Based Cleaner For: Removing Grease, Dirt, Carbon, Creosote, and Other Grimes From Insulating Blankets, Lineman’s Gloves, Rubber Sleeves, Jumper Cables, Hot Jumpers, and Line-hose

Category: Rubber Goods Cleaner

MMM S-11-A INSULATED CRIMP SL

Category: Insulated Copper Crimp Connectors

Insulator for Male Plug, Cam-Type, Detachable, Cable Range- 1/0 - 4/0 AWG, 16 Series Taper Nose

Category: Male Detachable Plug Taper Nose Cam Connectors