"t8-12-48g-850-hyb"

Wireway Sweeping Tee Fitting, Size/dims: 2.00x2.00, Material/Finish: Steel/Gray. For use with Lay-in Type 12 Wireway .

Category: Wireway Tee Fittings

Wireway Tee, NEMA Type 12, Lay-In, Outside Top Opening, Steel, ANSI 61 Gray Polyester Powder Finish, Size: 4 x 4 Inch

Category: Wireway Tee Fittings

Type 1 Screw Cover Wireway, 2-1/2 Inch x 2-1/2 Inch x 12 Inch, Steel, Gray, No Knockouts

Category: Screw Cover Wireway

Enclosure, NEMA 4X, Continuous Hinged Cover, Three Point Latch, Stainless Steel, 36 Inch x 30 Inch x 12 Inch

Category: Stainless Steel Wall Mount Enclosures

Type 12 Wireway Telescoping Fitting, 4 Inch x 4 Inch, Steel, Gray

Category: Wireway Telescope Fittings

Type H High Strength Split Bolt Connector, 12-10 AWG Solid/Stranded Copper, 3/8 x 25/32 IN, Bronze Alloy

Category: Copper Alloy Split Bolts

The vibration resistant male disconnect is made of copper and is nickel-plated. It is barrel insulated in yellow vinyl housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm¦). It is 0.98" (24.9 mm) long and 0.25" (6.4 mm) wide. The disconnect has a funnel entry barrel configuration and a brazed seam barrel. It comes in bottles of 50.

Category: Male Vinyl Insulated Wire Disconnects

EXGJH Flexible Coupling, 1/2 x 12 Inch Length, Explosionproof and Dust-Ignitionproof, Watertight, Stainless Steel End Fittings and Outer Braid, Stainless Steel Inner Core with Insulating Liner, Both End Fittings Female with Removable Male Nipple, For Use with Rigid/IMC Conduit

Category: Explosion-Proof Type ECGJH Couplings

Wall Angle Bracket, 12" Wide, Material: Steel, Finish: Black Powder Coat. Includes: (2) J-Bolts & Hardware.

Category: Cable Tray Mounting Hardware

Heat Shrink, Heavy-Wall, 12 - 6 AWG, 6" Length, 0.4" Expanded/0.15" Recovered I.D., 3:1 Shrink Ratio, Polyolefin Material, Black

Category: Heavy Wall Heat Shrink

Enclosure, NEMA 4/12, Concept Series, Hinge Cover With Quarter Turn Latch, 16 x 20 x 6 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 4 Wall Mount Enclosures

Compression Lug, Copper, 1-Hole, Flex, 450 kcmil Cable, 1/2 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Fork Terminal, 12 - 10 AWG, # 10 Stud Size, 50/PK

Category: Non-Insulated Standard Fork Terminals

Ring Terminal, Nylon Insulated, Funnel Entry 12 to 10 AWG, # 10 Inch Stud Size, 600 Volt, Yellow, Package of 500 Each

Category: Nylon Insulated Ring Tongues

Ring Terminal, Vinyl Insulated, Funnel Entry, 12 to 10 AWG, #10 Stud Size, 600 Volt, Copper, Yellow, Package of 75 Each

Category: Vinyl Insulated Ring Tongues

GEE 35120 INFT9.5/850/DIM120V

C Rechargeable NiMH Batteries, 2500 mAh, Charged and Ready to Use, Guaranteed to last up to 12 Months in Storage, 2-Pack

Category: Rechargeable C Batteries

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latch, NEMA 4, 35(H) x 30(W) x 12(D) Inch, Carbon Steel, Includes Zinc Plated Mounting Plate

Category: NEMA 4 Wall Mount Enclosures

Power Distribution Block, 1-Pole, Line: 6 AWG - 350 kcmil Cu/Al; Load: (12) 14-4 Cu, 12-4 Al

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Eaton Comet 18mm tubular photoelectric sensor, Right Angle, Sensor dist 4 in, 300 mA max AC L1 switched/DC NPN open coll, 300 mA AC/DC at 20-264Vac/15-30Vdc, 4 Pin Dual Key Micro Connector, Background Suppression, 8 in(.2m)

Category: Normal Duty Background Rejection Photoelectric Sensors

Thick wall adhesive lined, .8" (20.3mm) diameter, 12.0" (304.8mm) length, adhesive lined black cross-linked polyolefin, 5 pc. package quantity.

Category: Heavy Wall Heat Shrink

200 Amp, 4-pole, Heavy Duty Safety Switch, Fusible Without Neutral, 600 Volt AC, 250 Volt DC, NEMA 12

Category: 3-Pole 600 Volt Fused Heavy Duty Safety Switches

TPI CF12 12" COMMERCIAL FLOOR FAN

Category: Heavy Duty Portable Fans

Aluminum T Tap Connector Kit, Dual Rated, Main Conductor Range 2-12, Tap Range 2-12 AL, 2-14 CU, Tin Plated, UL, CSA, With De-Ox, Includes Cover

Category: Aluminum Tap Lugs