"b676-05-000-05 jmc steel group"

RadioRA 2 Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer, 450W/450VA Incandescent/Halogen/Magnetic Low-Voltage or 100W Approved CFL/LED 120V, Brown

Category: RadioRA Keypads & Sensors

RadioRA 2 Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer, 450W/450VA Incandescent/Halogen/Magnetic Low-Voltage or 100W Approved CFL/LED 120V, Taupe

Category: RadioRA Keypads & Sensors

Breaker, Molded Case, CV Series, 2-Pole, 200 Amp, 240 Volt AC, 65 kAIC. Includes: Mounting Kit.

Category: 240-277V Rated Molded Case Circuit Breakers

OZ-Gedney Type GUASC Sealing Cover, Malleable Iron Body, Steel Set-Screws, Buna-N O-Ring, Finish: Zinc Plated, 1-3/4 IN Maximum Body Height, 2-1/2 IN Turning Radius, Third Party Certification: UL File Number E-97032, Class I, Division 1, 2, Groups

EMT Conduit Strap, 2-Hole, 1-1/4 Inch Diameter, Steel, For Use With EMT Conduit

Category: Steel 2-Hole Conduit Straps

Efsr-gfi Series 1-gang Ground Fault Circuit Interrupter, Voltage Rating: 125 Vac, Amperage Rating: 20 Amp, Frequency Rating: 50 - 60 Hz, Trip Type: 5 Milamp Trip Setting, Enclosure: Nema 3, 3r, 7bcd, 9efg, Material: Malleable Iron, Mounting: Surface Mount With 1 In Feed-thru Hub, Standard: Class I, Group B, Class I, Groups C, D, Class Ii, Groups E, F, G, Class Iii, Ul Listed: E81751, Ul Standard:943, 1203, For U-line 20 Amp Receptacles

Category: 20 Amp Pin & Sleeve Receptacles

U-Line 2-Gang Receptacle With Mounting Box, Number Of Poles: 3, Number Of Wires: 2, Amperage Rating: 20 AMP, Voltage Rating: 250 VAC, Material: Malleable Iron Receptacle And Mounting Box, Nema Rating: NEMA 3, 3R, Mounting: Surface Mount With 1/2 IN Dead-End Hub, Motor Horsepower: 2 HP, Finish: Epoxy Powder Coat, Dimensions: 6.19 IN Width X 5.38 IN Height X 5.69 IN Depth, Standard: Class I, Division 1 And 2 Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2 Groups F, G, Class III, UL Listed: E10784, E81751, UL Standard: 1203, 1010, 894, CSA Standard: C22.2 No. 25, C22.2 No. 30, C22.2 No. 42, C22 No.159, CSA Certified: 038644, For CPH And ECP Mating Plugs

Category: 20 Amp Pin & Sleeve Receptacles

OZ-Gedney Type GUAT Conduit Outlet Box, Number Of Outlet: 3, Malleable Iron Body/Cover, Size: 1-1/2 IN, Cable Entry: (3) 1-1/2 IN Hubs, 70 CU-IN Capacity, No, 5-5/8 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 5-5/8 IN Width, 3-3/4 IN Depth, 5-5/8 IN Height, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof T Conduit Outlet Boxes

Explosion-Proof Pushbutton Control Station, Type Feed Through, Constructional Feature Explosion-Proof, Dust-Ignitionproof, Voltage Rating 600 VAC, Current Rating 10 Ampere, Legend Start/Stop, Number of Elements 2, Number of Circuits 2, Contact Configuration 2NO-2NC, Momentary, Universal, Operator Type Front Operated Button, Box Type Single Gang, Hub Size (2) 3/4 Inch, Enclosure Material Copper Free Aluminum Body/Cover, Enclosure Class I Div 1 Group C D, Class I Div 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/7CD/9EFG, Approval UL 508/698/1203, Application Hazardous Location

Category: Explosion-Proof Pushbutton Pilot Devices

OZ-Gedney Type RB Reducing Bushing, Size: 4 X 2-1/2 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1-1/2 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups B, C, D, Class I, Zone 1, 2, Groups IIA, IIB + H2, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, For Threaded Rigid Conduit And IMC

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-1/4 IN Body Diameter X 5-1/2 IN Overall Length, 3 IN Turning Radius, 9 OZ Sealing Compound Required, 1/2 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

48-Port Patch Panel with Multiport Modules (6 Jacks In A Group), Tested and Qualified to TIA 568-C Cat6A with SPC6A Cords, Cat6A/10 Gig Compatible IDC Towers, Supplied Rear Cable Management

Category: Category 6A Patch Panels

RadioRA 2 Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer, 450W/450VA Incandescent/Halogen/Magnetic Low-Voltage or 100W Approved CFL/LED 120V, Biscuit

Category: RadioRA Keypads & Sensors

RadioRA 2 Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer, 450W/450VA Incandescent/Halogen/Magnetic Low-Voltage or 100W Approved CFL/LED 120V, Hot

Category: RadioRA Keypads & Sensors

RadioRA 2 Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer, 450W/450VA Incandescent/Halogen/Magnetic Low-Voltage or 100W Approved CFL/LED 120V, White

Category: RadioRA Keypads & Sensors

RadioRA 2 Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer, 450W/450VA Incandescent/Halogen/Magnetic Low-Voltage or 100W Approved CFL/LED 120V, Midnight

Category: RadioRA Keypads & Sensors

OZ-Gedney Type GUAX Conduit Outlet Box, Number Of Outlet: 4, Malleable Iron Body, Copper-Free Aluminum Cover, Size: 3/4 IN, Cable Entry: (4) 3/4 IN Hubs, 15 CU-IN Capacity, No, 3 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 3-5/8 IN Width, 2-1/8 IN Depth, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof X Conduit Outlet Boxes

Meter Stack Module, Commercial, 3-Phase In/3-Phase Out, 3 Meter Socket, Ringless, 7 Jaws With Lever Bypass And Jaw Release, 1200 Amp Bus Rating, 225 Amp Socket Rating, Provision For 2-pole Main Tenant Breaker, 120/240 Volt, 208/120 Volt, Network Metering, Indoor/Outdoor Construction

Category: Commercial Meter Stacks

C-H MTBFCVR1 MTB COVER

Category: Group Metering Renewal Parts

Contender Eds Series 1-gang 2 Circuit Push Button Switch, Action: Momentary, Contact Configuration: 2 No/2 Nc, Contact Rating: 10 Amp At 600 Vac, Actuator: Front Operated, Enclosure: Nema 3, 7cd, 9efg, Mounting: Surface Mount With 1 In Dead-end Hub, Material: Malleable Iron, Finish: Triple-coat (zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 5.31 In, Width: 3.72 In, Depth: 3.06 In, Legend: Start/stop, Standard: Ul 508, Ul 698, Ul 1203, E10449, E8 1203, E10449, E81751 Ul Listed, Class I, Division 1, Groups C, D , Class I, Division 2, Groups B, C, D Class Ii, Division 1 And 2, Groups E, F, G And Class Iii, For Remote Control Of Motors

Category: Explosion-Proof Pushbutton Pilot Devices

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2 IN Body Diameter X 5-1/16 IN Overall Length, 2-5/8 IN Turning Radius, 6 OZ Sealing Compound Required, 1/4 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

Explosion-Proof Conduit Outlet Box, Style LB, Hub Size 1 Inch, Hub Type External, Number of Hubs 2, Hub Location (1) Side, (1) Down, Capacity 17 Cu Inch, Shape Round, Cover Type Internally Threaded, Cover Opening Diameter 3 Inch, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/4, Material Zinc Electroplated Malleable Iron, Approval UL 886, CSA C22.2, Applicable Standard NEC, Application Pulling of Wires, Wet Location, Constructional Feature Explosion-Proof, Dust Ignitionproof, Includes Ground Screw/Lug

Category: Explosion-Proof LB Conduit Outlet Boxes

U-Line 2-Gang Receptacle With Mounting Box, Number Of Poles: 3, Number Of Wires: 2, Amperage Rating: 20 AMP, Voltage Rating: 250 VAC, Material: Malleable Iron Receptacle And Mounting Box, Nema Rating: NEMA 3, 3R, Mounting: Surface Mount With 3/4 IN Feed-Thru Hub, Motor Horsepower: 2 HP, Finish: Epoxy Powder Coat, Dimensions: 6.19 IN Width X 6.13 IN Height X 5.69 IN Depth, Standard: Class I, Division 1 And 2 Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2 Groups F, G, Class III, UL Listed: E10784, E81751, UL Standard: 1203, 1010, 894, CSA Standard: C22.2 No. 25, C22.2 No. 30, C22.2 No. 42, C22 No.159, CSA Certified: 038644, For CPH And ECP Mating Plugs

Category: Explosion-Proof Assembled Receptacles

Contender Nameplate, Legend: Stop, Enclosure: NEMA 3, 7CD, 9EFG, Standard: Class I, Division 1, Groups C, D Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Use On EFDB Series Pushbutton

Category: Pilot Device Pushbutton Caps