"dglc200a-nc"

Safety Switch, Cable Operated, Right or Left Hand Pull, Slack Line, 2 Normally Open, 2 Normally Closed Contact, NEMA 12/13, IP65, Manual Reset

Category: Safety Actuators

Limit Switch: Plastic Spindle Actuator, Contact Configuration: 2 NC, Dimensions: 68 x 30 x 27 mm, IP65 Rated, Plastic Housing

Category: Limit Switch Actuators

Auxiliary Contact Kit, Break Before Break, 1 Normally Open, 1 Normally Closed, A600 Pilot Duty

Category: Safety Switch & Disconnect Auxiliary Contacts

3 Pole, 192 Amp, Non-reversing Across The Line Contactor With 480v Ac Coil And 1no And 1 Nc Auxiliary Contacts

Category: IEC Contactors - 66-Over Amp

6 Inch LED Wide Beam Reflector, Self Flanged, Specular Clear Finish

Category: 6" CFL Recessed Downlighting

Rees; Rope Operated Switch; Slack Cable; Contact Configuration: #9 No + Nc; Action: Momentary Slow Make/slow Break; Size: 2.810 In Length X 7.270 In Width; Actuator: Pushbutton; Operating Temperature: 0 To +55 Deg C; Environmental Conditions: -40 To +85 Deg C Storage Temperature; Normal Potential: 110 - 120 Vac, 220 -240 Vac, 440 - 480 Vac, 550 - 600 Vac At Power Factor 0.35 Or Less; 115 - 125 Vdc, 230 - 250 Vdc At Inductive Loads As Specified In Section 125 Of Industrial Control Devices, Controllers And Assemblies, Ansi/NEMA Ics 2-1988; Note: Operatingtemperatures At 0 Deg C Are Based On The Absence Of Freezing Moisture And Liquids; Normal Current: 6, 3, 1.5, 1.2, 2.2, 1.1 Amp; Inrush Current: 60, 30, 15, 12amp; Trip Force: 6 Lb; Operating Force Between 10 Ft Supports: 0.700 Lb; Mechanical Life: 1000000 Operations; Wire Size: 14/2 Awg Stranded; NEMA: 12/13; Old Catalog Number: 3275; Ip: 65; Includes: Sealing Gasket And Four Mounting Screws; Contact Finish: Gold Plated; Lever Finish: Nickel Plated

Category: Safety Actuators

2 RO (NC-NO). Allowed Slot Locations B. SVX Ready Programs Include Basic, Local/Remote, Standard, MSS, PID, Multi-P, PFC

Category: VFD I/O Modules

Push Button, Flush Head, Black, Momentary, 1 Normally Open / Normally Closed Contacts, 30 mm

Category: 30mm Flush Pushbutton Operators

Contactor, IEC, 32 Amp, 460 Volt AC, 4-Pole, 480 Volt AC Coil, 2 Normally Open, 2 Normally Closed Contact

Category: IEC Contactors - 4-Pole

Alarm/Auxiliary Block, Left Mount, 1 Normally Open/Normally Closed, for GPS1/2, Pack of 10

Category: Starter & Contactor Auxiliary Contacts

Limit Switch, Micro, Enclosed, Top Roller Plunger, Parallel, 1 Normally Open, 1 Normally Closed, 2-Pole, 9 Foot Cable, Bottom Exit

Category: Roller Plunger Micro Limit Switch Operators

3 pole, 125 amp, non-reversing across the line contactor with 480V AC coil and 1 NO and 1 NC auxiliary contacts

Category: IEC Contactors - 66-Over Amp

Switch, Cable Pull, Left, 2 Normally Open, 2 Normally Closed Contacts, Broken Cable Detection, Yellow, Aluminum Housing

Category: Safety Actuators

JUNO IC922LEDG4-41K-1

Category: 6" Recessed LED Downlights

The ta25du-4.0 thermal overload relay is an economic electromechanical protection device for the main circuit. it offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10a. further features are the temperature compensation, trip contact (nc), signal contact (no), automatic- or manUAl reset selectable, trip-free mechanism, stop- and test function and a trip indication. The overload relays are connected directly to the block contactors. single mounting kits are available as accessory.

Category: Overload Relays - Thermal Type

2 poles screw type right side mounted auxilliary contact block, instantaneous N.O. and N.C. contacts. 70 millimiters depth x 68 millimiters height x 12.5 millimiters width. Power loss at rated operating conditions per pole 0.2 W.

Category: 16mm Base Mount Contact Blocks

3 Pole, 150 Amp, Non-reversing Across The Line Contactor With 24v Ac Coil And 1no And 1 Nc Auxiliary Contact

Category: IEC Contactors - 66-Over Amp

Contactor, Screw Terminal, 3 Pole, 125 Amp, Non-Reversing, 230-240VAC Coil, 1 NO and 1 NC Auxiliary Contacts

Category: IEC Contactors - 66-Over Amp

150 Amp, 3 Pole, Non-reversing Across the Line Contactor With 100-250v Ac/dc Coil With 1 No And 1 Nc Auxiliary Contacts

Category: IEC Contactors - DC Operating

Rees; Cable Operated Switch; Slack Cable; Contact Configuration: No + Nc; Material: High Quality Die-cast Aluminum Housing; Size: 3.900 In Height; Mounting: 4.380 Sq-in Hole Distance; Operating Temperature: 0 To +55 Deg C; Environmental Conditions: -40 To +85 Deg C Storage Temperature; Note: Operating Temperatures At 0deg C Are Based On The Absence Of Freezing Moisture And Liquids; Normal Potential: 110 - 120 Vac, 220 - 240 Vac, 440 - 480 Vac, 550 - 600 Vac At Power Factor 0.35 Or Less; 115 - 125 Vdc, 230 - 250 Vdc At Inductive Loads As Specified In Section 125 Of Industrial Control Devices, Controllers And Assemblies, Ansi/NEMA Ics2-1988; Normal Current: 6, 3, 1.5, 1.2, 2.2, 1.1 Amp; Inrush Current: 60, 30, 15, 12 Amp; Trip Force: 40 Lb; Operating Force Between 10 Ft Supports: 11 Lb; Mechanical Life: 150000 Operations; Wire Size: 14/2 Awg Stranded; NEMA: 12/13; Color: Yellow Housing; Reset Type: Automatic; Finish: Powder Coated Painted Housing;old Catalog Number: 2669; Ip: 65; Conduit Openings: (2) 1/2 In Npt; Contact Finish: Gold Plated

Category: Limit Switch Actuators

Contact Kit, DC Magnetic Contactor, Size 1 & 2, 1 Normally Open, 1 Normally Closed, Left or Right, Side Mount

Category: Starter & Contactor Auxiliary Contacts