Recessed Floor Box Service Fittings

One-gang blank housing assembly. Designed to blank off compartment when no devices are used. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Recessed Floor Box Service Fittings

1" (25mm) diameter bushed opening.

Category: Recessed Floor Box Service Fittings

Four-piece power service fitting. Duplex opening both sides. Receptacles not included. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

<p>Dual-service fitting includes housing, base, two mounting frames, divider, and mounting hardware. For use on one No. 2 and one No. 4 Duct. Has 1/2'' and 3/4'' trade size conduit knockouts on each end. 104.3 cu. in. (1709cm3) capacity.</p>

Category: Recessed Floor Box Service Fittings

Accepts standard 15A and 20A duplex receptacles. NOTE: For RFB4-SS Series Floor Boxes only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

Service Fitting, Type: 4-Piece, Duplex Receptacle 20A/125V on Both Sides, Material: Aluminum, For Use With Wiremold® 525 Series Service Fittings.

Category: Recessed Floor Box Service Fittings

Service Box Fitting, Type: 20 Amp, 125 Volt Duplex Receptacle (One Side), Metallic

Category: Recessed Floor Box Service Fittings

Service Box Plate, Metallic, Type: Decorator/GFI Opening (One Side)

Category: Recessed Floor Box Service Fittings

Internal Bracket, Type: GFI Receptacle, Metallic, Communication or Audio/Video Devices, For RFB4 Only.

Category: Recessed Floor Box Service Fittings

Y Fitting, 3/4 Inch, For Use With Multi-Service Floor Box, Gray, Non-Metallic

Category: Recessed Floor Box Service Fittings

Single-service fitting includes housing, base, two mounting frames, and mounting hardware. For use on 2" (51mm) IPS or PK Preset Systems. For PK activation, use in conjunction with FloorPort Partition Feed and PK Kit. Has 1/2" and 3/4" trade size conduit knockouts on each end. 53.3 cu. in. (906cm3) capacity.

Category: Recessed Floor Box Service Fittings

Service Fitting, 3-1/2 Inch 20A, Material: Aluminum, Single Pedestal

Category: Recessed Floor Box Service Fittings

Single GFI opening faceplate. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Service Fitting, 20A, Single U-Slot, Three Wire Grounded, Brass

Category: Recessed Floor Box Service Fittings

2" IPS Afterset insert - 2 7/8" Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Device plate that will accept up to two (2) ports of communication devices. For use in either of the two side compartments only. Not for use in the center compartment. Communication devices supplied by others.

Category: Recessed Floor Box Service Fittings

Cover Kit 6" Round Nickel-plated w/2 Flip Lids (fits FLBC4500LR)

Category: Recessed Floor Box Service Fittings

Device Plate, Galvanized Steel, Duplex Receptacle, For use with Two Gang Recessed Service Floor Box, 90 Cubic Inches, Length 10-1/4 Inches, Width 4-11/16 Inches, Depth 3-3/4 Inches, 3/4 Inch and 1 Inch Conduit Hubs, Cast Iron, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings and Two Gang Recessed Service Floor Box, 90 Cubic Inches, Length 9-15/16 Inches, Width 5-3/32 Inches, Depth 3-3/4 Inches, 3/4 Inch and 1 Inch Conduit Hubs, Cast Iron, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings

Category: Recessed Floor Box Service Fittings

Device Plate, Galvanized Steel, Duplex Receptacle, For use with Four Gang Recessed Service Floor Box, 126 Cubic Inches for Device Access and 40 Cubic Inches for Device Compartments, Length 5-3/4 Inches, Width 2-3/4 Inches, Depth 2-1/2 Inches, 3/4 Inch and 1-1/4 Inch Knockouts, Galvanized Steel, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings

Category: Recessed Floor Box Service Fittings

1/2 GANG 20A DUPLEX RECEPTACLE

Category: Recessed Floor Box Service Fittings

Wiremold CM Series low profile adapter included. Wiremold CM Series Open System inserts sold separately. NOTE: For RFB4 Series Floor Box side compartment only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

Round Cover Kit, 6 Inch Diameter, (2) Flip Lids, Brass, Hole Pattern Fits FLBC4500LR.

Category: Recessed Floor Box Service Fittings

<p>Single duplex opening faceplate.</p>

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with a disposable construction cover. Unit works with 10" Evolution cover assemblies (10CTC). All cover assemblies are sold separately and are available in the following finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings