Search results

Tile Flange, 1-Gang, Aluminum, Gray. W x L: 3.48" x 4.524". For Use on: 880S1, 880M1, 880CS1-1, 880CM1-1 Floor Boxes in Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

All communication device accepts up to four UTP connectors. Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

WMD PSRC9FFTCGY UFD FLUSH FUR

Category: Round Recessed Box Covers

2" IPS locking nipple for 525 and Multiplex Series fittings. 1" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Surface Style Cover Assembly with Floor Insert, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

WMD RC9CM2TCGY 2IN FURNITURE

Category: Poke-Through Cover Assemblies

Wmd 428bl Blank Plate Blk

Category: Square / Rectangle Recessed Box Covers

Blank plate. Used to blank off the entire center compartment when no devices or cabling are to be used.

Category: Recessed Compartment Box Covers

Prewired snap-in 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details.

Category: Recessed Floor Box Service Fittings

RFB4-4DB DEVICE PLATE W/EXTRON AAP

Category: Recessed Floor Box Service Fittings

WMD AMD8CTCBK BK FL & BK CV/C

Category: Poke-Through Cover Assemblies

Complete with one 3/4" [19.1mm] conduit and two 1/2" trade size adapters and closure plugs. Colors available in painted gray (GY), black (BK), forged brushed aluminum (AL), and plated brass (BS). Use with the RC7STC Insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" [78mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimu

Category: Poke-Through Cover Assemblies

Cover has two 1/2" trade size conduits and one 3/4" trade size threaded conduit opening for feeding cables and wires through the floor. Flush flanges available in a variety of colors/finishes. Slide covers match painted flange colors. Aluminum and brass covers shipped with black slide covers. Brass flange also available with nonmetallic brass-color slide holder. Die-cast aluminum construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. [295 cu.cm] cap

Category: Assembled Recessed Round Boxes

8IN TILE SHIMS

Category: Assembled Poke-Through Units

WMD RC9 CONTROLLE

Category: Poke-Through Cover Assemblies

In-Wall Storage Box with Flange, Allows Compatibility With Standard 3.5" Studs & 2.5" Studs, Drywall And Stud Mountable, Knockouts For Single Gang Outlets And 1-1/4", 1", & ½"Conduit, Integrated Universal Zip Tie Anchor Points, Enclosure UL 2416 Listed For Installation Of AV, IT & Communication Technology Equipment: Stores A Large Variety Of AV Components, Landscape/Portrait Installation, L: 19", H: 19" , D: 5", Black

Category: Recessed Home Entertainment Boxes

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Brass

Category: Square / Rectangle Recessed Box Covers

Single receptacle 1.59" (40mm). diameter. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Cover Assembly, Surface Style, Solid, Material/Finish: Die Cast Aluminum/Bronze, No Cutouts are Provided for Floor Coverings.

Category: Round Recessed Box Covers

Single receptacle faceplate. Hole diameter: 1.39" (35mm). NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

RFB6 1.59 DIA. SINGLE REC PLATE

Category: Recessed Floor Box Service Fittings

Blank Flanged Cover Assembly. Die-Cast Aluminum. Color: Nickel. For use with: Tile, Carpet. Origin: USA

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Device, Flush, Finish Flange and Slide Holder Assembly, Non-Metallic Cover, Color: Aluminum. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Single-gang device plate that will accept up six (6) Ortronics TracJack devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings