"ab-6660stg the austin co."

Brady's Powermarkultra Smooth Polyester Outdoor Grade Tape Is Ideal For Mountingon Sign Panels. Low Halide Construction Makes This The Best Choice Fro Labelingstainless Steel And Nickel Surfaces.

Category: Labeling Tape

Pole Climbers 1-1/2-Inch Gaffs 15-Inch Length, Secure sleeve and leg iron connection. Two slotted hex-head bolts with lock washers and barrel-type nuts join the steel sleeve and leg iron together

Category: Pole Climbing Gaff Guards

Kit comes complete with adapter ring to secure into the boxes, 1-1/4 / 2" concentric screw plug closure plug. Conduit fittings sold separately by others

Category: Round Recessed Box Covers

To cover the upper front opening of ProLine Slope-Front HMI Enclosures. This Upper Front Cover for ProLine Sloped-Front HMI, PCS712F item fits 700x1200mm with a material of Steel colored Lt Gray.

Category: Enclosure Front Plates

Cable Runway Center Support Kit supports center of ladder rack from the ceiling. This Runway Center Support Kit, LCSK6 item fits 6.00 with a material of Steel finish Black.

Category: Cable Tray - Runway to Ceiling Kits

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in blue vinyl housing. It has a tab size of 0.187/0.205 x 0.032" (4.8/5.2 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.77" (19.

Category: Female Vinyl Insulated Wire Disconnects

ABB F204A-40/0.3 RCD 4P 40A 3 - The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

Category: 4-Pole DIN Rail Mount Circuit Breakers

M18™ 1" PEX Crimp Jaw for M18™ Short Throw Press Tool, Jaws Are Optimized For One Handed Pressing, For Use With the M18™ Short Throw Press (2674-20C) (Sold Separately)

Category: Cordless Crimpers

The cable tie mount in white uses #6 (M3) screws or user supplied adhesive. It measures 1.12" long x 1.12" wide (28.5 x 28.5 mm). It is used with miniature, intermediate, and standard cable ties. It is made of nylon 6.6, which increases mechanical strengt

Category: Cable Tie Bases

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in yellow vinyl housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm²). It is 0.95" (24.1 mm) lo

Category: Female Vinyl Insulated Wire Disconnects

Eaton B-Line series fastener hardware and accessories, Heavy and medium duty all purpose anchor, Zinc plated carbon steel ,3/8" x 3-3/4", Anchors can be installed through the fixture,Wedge anchor

Category: Cable Tray Mounting Hardware

APP STB-38L 3/8 IN INSUL LFMC CONN

Category: Straight Steel Liquidtight Flex Connectors

Includes One End Closing Tube and Two Corner Clamps: For Closing the Stringers of a Single Piece of Runway, 12", Black, For Use with 12" Runway

Category: Cable Tray Ends

Category 6, RJ45, 8-position, 8-wire universal shielded black module with integral shield, bulk packaged. Includes the EGJT termination tool.

Category: Snap-In Cat 6 Jack Inserts

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Nylon 6.6 material, it's ideal f

Category: Non-Releasable Cable Ties

The vibration resistant male disconnect is made of brass and is nickel-plated. It is fully insulated in blue premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.9" (22.9 m

Category: Male Nylon Insulated Wire Disconnects

CRC 05186 BRAKE PARTS CLEANER

Category: Multi-Purpose Lubricant

The Supra-Grip™ female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.250 x 0.032 (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.93" (23.6 mm) long and 0.35" (8.9 mm)

Category: Female Nylon Insulated Wire Disconnects

M18™ 5/8" Viega PureFlow™ Jaw for M18™ Short Throw Press Tool, Jaws Are Optimized For One Handed Pressing, For Use With the M18™ Short Throw Press (2674-20C) (Sold Separately)

Category: Wire Crimping Dies, Adapters, & Blades

The screw applied mount for Tak-Ty hook and loop cable ties in black uses #6 (M3) screw. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HL

Category: Cable Tie Bases

The vibration resistant, right angle style female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.187/0.205 x 0.020 (4.8/5.2 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.

Category: Female Nylon Insulated Wire Disconnects

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Orange, 10 ft.

Category: Category 6 Patch Cords

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Blue, 2 meters.

Category: Category 6 Patch Cords

Bare concentric stranded conduct. that consists of peripheral tinned copper plated steel which protects & conceals the internal copper stranding.Ideal for exposed electr. applic. where copper theft may occur due to its tinned outer strands.

Category: Lightning Protection Devices