"ab-6660stg the austin co."

MILB U8667-O-2/200 200A 4T RT, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

ABB White 0.25 Mm Diameter Plotter Pen For The Ams 500 Marking Table

Category: Marking & Labeling Accessories

Mounting plate for JB, material: Sheet steel, 2.0 mm, surface: Zinc-plated, description: Mounting plates for component installation inside of the enclosure.

Category: Enclosure Back Panels

MLB NU2120-X 320A 7TERM METR SKT, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

Meter Base, 200 Amp, 600 Volt AC, 3-Phase, 7 Jaw, Hub Cover, Overhead/Underground, Rated, NEMA 3R Enclosure, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

TS 8 Type 3R Baying System Enclosure, Sheet Steel, Dipcoat-primed, Powder-coated on the outside, RAL 7035

Category: Indoor Free Standing Data, Audio, & Video Enclosures

Between The Stud Box With Removable Mud Ring, 4-Gang, Knockouts: (8) 1/2 & 3/4 Inch, and (3) 1/2 Inch, Stud Spacing: 16 -24 Inch, Material/Finish: Steel/Pre-Galvanized. For Use With 1-1/4 to 2-1/2 Inch Drywall, Made In The USA. - DISC PER MFR

Category: Prefab Assemblies

The Panduit« PatchRunner« High Capacity Vertical Cable Manager organizes, protects and showcases high-density cabling for the latest high-performance enterprise switching equipment. Not only do wide and deep features provide for Category 6A cables, but Integral EIA zero RU mounting capabilities also allow equipment to be patched to the manager, freeing up valuable RU space. Dual-sided, Steel, 45RU, Black, 1pc, Black.

Category: Rack Cable Management Devices

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

Q line circuit breakers are one-inch wide per pole, compact, thermal-magnetic devices designed for residential and commercial applications. The QB breakers are bolt-on versions of the Q Line used for bolting to the bus connections of load centers and lighting panels. All Q Line circuit breakers feature Quick-make / Quick-break mechanisms, common trip bars, and easy to spot trip indication to ensure safety and reliability. Q Line breakers are available in 1, 2, and 3 pole versions, can be ordered with auxiliary contact and shunt trip accessories, and can be ordered for use in HID applications. 20AF Amps 20 A

Category: Residential Arc Fault Circuit Breakers

Constructed Of Durable Polyester, Our Lockout Tags Exceed Osha's 50 Lb Pull Requirement For Tagout Devices. Rigid Polyester Surface Is Easy To Write On And Stays Legible Longer Than Cardstock. The 3/8 Diameter Brass Eyelet Accepts Most Padlock Shackles.

Category: Lockout Tags

House Panel, 200 Amp, 120/240 Volt AC, 1-Phase, 8 Space, OH/UG Feed, 4 Jaw Meter, Service Entrance Rated, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: House Panels

IMT LC4527 PHOTO CONTROL-THER

Category: Locking Photo Controls

H-Max Series, The NEMA Type 12/IP54 option kit is used to convert a NEMA Type 1 to a NEMA Type 12 drive for frame FS5. Kit consists of a drive cover, fan kit and plugs.

Category: HVAC Variable Frequency Drive Enclosure Kits

H-Max Series, The NEMA Type 12/IP54 option kit is used to convert a NEMA Type 1 to a NEMA Type 12 drive for frame FS6. Kit consists of a drive cover, fan kit and plugs.

Category: HVAC Variable Frequency Drive Enclosure Kits

The pan-post standoff is natural color and requires a #10 (M5) screw. It measures 1.06"L x .72"W x 1.97"H (26.9 x 18.3 x 50.0 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 100.

Category: Cable Tie Bases

The Panduit Pan-Steel® low-profile buckles are designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. 0.5"W (13mm), 100pc.

Category: Non-Releasable Cable Ties

Connecting Bar Holder Freely Swivels And Moves With You When In Unlocked Position, Tool Holder Locks Bar At 0-Degree, 30-Degree, And 60-Degree Angles For Both Left And Right-Handed Use, Tucked Tunnel Loop Design Keeps Tools Tight To Belt And Accommodates Up To 3-Inch (7.6 Cm) Wide Belts, Durable, Full Grain, Russet Leather Patent Pending Holder, Designed In The Usa, Black Oxide Protective Coating To Prevent Rust On Metal Holder, Heavy-Duty Leather For Long Life, Designed For Best Use With All Klein Tools' Hex And Round Connecting Bars

Category: Tool Holders

Mess-Free Chalk Line Tool Offers Quick Chalk Loading With Klein Tools Replaceable Capsules (Cat. Nos. Chlk00R And Chlk00B), Auto-Retracting Reel Quickly Rewinds 50 Feet (15.24 M) Of Thread With A Push Of A Button, Strong Nylon Line Features 1.0 Mm Braided Thread For Precise And Clear Lines, High Impact Abs Case With Soft Grips For Long Term Durability And Comfort, Includes Semi-Permanent Red Chalk And Allows For A Color Swap From Red To Blue Using The Replaceable Capsule (Cat. No. Chlk00B); Sold Separately, Transparent Chalk Housing For Easy View Of Remaining Chalk, Lanyard Hole For Hanging Reel To Belt And Tool Pouch, Easy Thread Replacement To Change Out Broken, Wet, Or Old Thread

Category: Chalk Line Tools

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 0.75" long x 0.75" wide (19.1 x 19.1 mm) and made of ABS plastic. It is used with miniature and intermediate cable ties. It is designed for indoor environments

Category: Cable Tie Bases