"ab-886ws the austin co."

Hardware replacement kit for the 4-post open frame rack. This 4-Post Open Frame Rack Hardware Kit, E4PKIT item finish Zinc Plated with a material of Steel.

Category: Rack Mounting Kits & Hardware

The pan-post standoff is natural color and requires a #12 (M5.5) screw. It measures 1.06" long x 0.72" wide x 4.60" high (26.9 x 18.3 x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 10.

Category: Cable Tie Bases

APP STNM-SR50 1/2 IN WIRE MESH

Category: Straight Non-Metallic Liquidtight Flex Connectors

Liquidtight Connector, 2 1/2 inch, 45°, With Ground Lug, Material: Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Use Our Warning Labels To Call Attention To Hazards On Paperwork, Equipment Andpackages In Any Langauge Without The Use Of Words. High Quality Vinyl Labels Feature 11 Different Warning Pictograms Available In 5 Different Sizes. 1/2, 1 And 2 Square Labe

Category: Shock Hazard Labels

"Door-In-Door" Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only, Includes 2 Flip Lids That Fold Into The Main Lid To Hide All Hinges And Doors While In Use, Will Accommodate Decora-Style Receptacles And QuickPort Inserts, Also Includes Pre-Assembled Gasket And Mounting Screws, Brass

Category: Round Recessed Box Covers

Residential Meter Stack Module, Group Metering Type, 125 Amp, Aluminum Bus 800 Amp, Lever bypass, Indoor/outdoor, Five-jaws, 4 Sockets, Three-phase in, single-phase out, Ringless Security, 120/208 Volt AC, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

Liquidtight Connector, 1/2 Inch, 45°, With Ground Lug, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

AccessPlus Rack Angles are used to mount 19in rack equipment inside the cabinet. This Rack Angles Tapped 12U, EWMR24T item fits 24.00 with a material of Steel colored Black.

Category: Rack Shelves

CIQ-RJA CableIQ™ RJ45/11 Modular Adapter, For Use with the CableIQ™ (CIQ-100) Qualification Tester, 8-Pin/4-Pin Modular Jack to 8-Pin/4-Pin Modular Jack

Category: Network Cable Testers

For mounting the suspension system to vertical surface allowing tube extension horizontally and swivel. This Syspend 180-Max Horizontal Wall Joint, S1MWJHG item measures 8.29x9.02x9.02 inches with a material of Aluminum colored Lt Gray.

Category: Industrial Consolet Mounting Accessories

HOF A36244SU PULL BOX EXTENDE

Category: Enclosure Surface Covers & Doors

Liquidtight Connector, 1-1/4 Inch, 90 Degree, With Grounding Lug, Wire Range 8 - 1/0 AWG, Malleable Iron

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

App Stnmsr100 Appleton wire Grip

Category: Straight Non-Metallic Liquidtight Flex Connectors

200 Amp, 1-Phase, 4 Jaw, Ring-Type. 3-Wire, 600V, Flush Mount, Bottom Feed, NEMA 3R. HxWxD: 17.28" x 18.75" x 6.31". Old Style KO & Flange., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Installation tool for use with the following stainless steel cross section ties:Type MLT: Standard, light-heavy, and heavyType MLTFC: Standard and heavyType MLTC, MLT-LPAL, and MLTD: HeavyUsed with custom length banding cross sections:Type MB: Standard an

Category: Cable Tie Tools

A rigid steel pedestal with die-cast legs and mounting holes for bolting to the floor or casters. This Pedestal with Legs, AP36L44 item measures 36.00x4.00x4.00 inches with a material of Steel colored Gray.

Category: Industrial Consolet Pedestals

Provides positive internal safety lockout on electrical enclosures while the equipment is energized. This Electrical Interlocks, AEK115 item is 115V with a material of Steel.

Category: Latch Kits For Single Door NEMA 12 Enclosures

Provides positive internal safety lockout on electrical enclosures while the equipment is energized. This Electrical Interlocks, NDH, AEK460NDH item is rated 460V with a material of Steel.

Category: Latch Kits For Single Door NEMA 12 Enclosures

Meter Breaker, Combination Service Entrance, 200 Amp, 120/240 Volt AC, 1-Phase, CH Type, 8 Space, 8 -Pole, CSR2200 Main Breaker, 4 Jaw, Ringless, Over Head/Under Ground Service, with Feed Through Lugs, Copper Bus, NEMA 3R, 10 kAIC, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Universal Electrical Box Bracket, Feet on Far-Side Supports Help Prevent Damage to the Drywall, Can Be Mounted to Stud on All Four Sides ***Mounting Bracket Only***

Category: Metallic Low Voltage Box Mounting Brackets

Meter Socket, Commercial, 320 Amp, Overhead/Underground, 5 x 5 Inch Hub Opening, 3/8 Inch Stud, 4 - Jaw, 1-Phase, Lever Bypass, Triplex, 3-Wire, Ringless, 600 Volt AC, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets with Bypass

4" Root Cutter Attachment For MX FUEL™ Sewer Drum Machine, Cut Through Roots Inside the Pipe While Clearing

Category: Power Cable Fishing Systems

Meter Pack, Ringless Style Covers With Horn Bypass, 1-phase, 3 Meter Sockets, 200 Amp Socket Rating, 600 Amp Bus Rating, Aluminum Bus, Requires Bolt-on Type Main Tenant Circuit Breaker, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Meter Packs