"ab-886ws the austin co."

OM3, 1 fiber, 900µm buffered fiber, LC to pigtail multimode simplex pigtail,(one LC connector on one end and open on the other end) 3 meters

Category: Fiber Optic Patch Cords

Used for supporting the 2x2 and 4x4 Fiber-Duct™ Systems from new threaded rod installations. Bracket is secured to threaded rod with two nuts. Contains hardware for attaching to threaded rods and hardware for mounting channel to bracket. For 5/8" Threaded

Category: Heat Cable Brackets & Clips

Braided Expandable Sleeving, .13" diameter (3.2mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, gray, Flame Retardant, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Red, 14 ft.

Category: Category 6 Patch Cords

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Black, 5 meters.

Category: Category 6 Patch Cords

The cable tie mount in black is installed onto a 0.31" (7.9mm) stud. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Keyed, Category 6A, 10 Gb/s shielded patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end, Red, 7 ft.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Green, 14 ft.

Category: Category 6 Patch Cords

Keyed, Category 6A, 24 AWG, 10 Gb/s UTP patch cord with TX6A™ 10Gig™ Keyed Modular Plug on one end and TX6A™ 10Gig™ Non-Keyed Modular Plug on the other end. Includes patent pending MaTriX Tape Technology, Black, 10 meters.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Red, 10 ft.

Category: Category 6 Patch Cords

Keyed, Category 6, UTP patch cord with TX6™ PLUS Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed Modular Plug on the other end, Blue, 3 meters.

Category: Category 6 Patch Cords

The Panduit® NetManager® Front-to-Rear Pass-through Blanking Panel bypasses airflow while creating a professional aesthetic in cost-effective NM3 and NMF3 High-Capacity NetManager® Cable Managers. Installation is simple, users simply snap panels into cab

Category: Cable Stackers

The Panduit® NetManager® Front-to-Rear Pass-through Blanking Panel bypasses airflow while creating a professional aesthetic in cost-effective NM1 and NMF1 High-Capacity NetManager® Cable Managers. Installation is simple, users simply snap panels into cab

Category: Cable Stackers

Pan-Steel® Polyester Fully Coated Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Polyester to promote worker safety

Category: Non-Releasable Cable Ties

Braided Expandable Sleeving, , 1.50" diameter (38.1mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, gray , Polyethylene Terephthalate, 50 ft. per reel.

Category: Braided Expandable Sleeving

The pan-post standoff is black and requires a #10 (M5) screw. It measures 1.06" long x 0.72" wide x 4.60" high (26.9 x 18.3 x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 100.

Category: Cable Tie Bases

The cable tie mount in natural color is applied with a #8 (M4) screw and is 0.43" (10.9 mm) wide. It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in indoor environments. It comes in pac

Category: Cable Tie Bases

CUT 37MM140R1240K 400A COMMERCIAL METER STACK, 3PH, 7 JAW BOLT ON SOCKET, K BA, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Commercial Meter Stacks

2-1/2" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

Clevis Hanger, 1/2 Inch Pipe, 3/8 Inch Rod, Steel/Electro-Galvanized, Recommended For the Suspension of Stationary Pipe

Category: Strut Channel Clevis Hangers

nVent ERICO copper bonded rods combine the strength of steel for ease of installation with molecularly bonded copper for long lasting corrosion resistance. Pointed, 3/8" x 5' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

The vibration resistant male tab disconnect is made of brass and is nickel-plated. It is fully insulated in a red, nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.90" (22.9 mm

Category: Male Nylon Insulated Wire Disconnects

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

4" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire