"ab-88x"

OTV RSA-4161-AB-D1-TGR-LAB

THB SSF-HB8-AB #8 WIRE ROD &

Category: Rod & Wire Hangers

SUP AB 214SS 90DEG RT FACING

Category: 90 Degree Strut Channel Corner Connectors

MGT DO-AB

LED Lamp, 16 Watt, 120-277 Volt, Bulb: T8, Length: 48 Inch, Base: Medium Bi-Pin (G13), Lumens: 1850, Beam Angle: 190°, Field Angle: 300°, CRI: 80, Color Temperature: 5000K, Rated Life: L70 50,000+ Hours, NOTE: Double-Ended Ballast BYPass Installation, Wired at Both Ends, Utilizes Existing Lampholders, Shunted or Non-Shunted (see wiring diagram on Catalog page .pdf). UL rated for enclosed fixtures. TCP LED Type AB™ Tube. DLC Listed.

Category: T8 Tubular LED Lamps

SUP AB 220SS 316 4-HOLE TEE P

Category: Flat Plate Strut Channel Connectors

STL 132-W-AB-1/2 2GNG DEV BX

Category: Metallic Handy Boxes

CEM CP-AFWL-AB AFWL APPROACH

THB SSF-HB1/4-AB ROD & WIRE A

Category: Rod & Wire Hangers

SUP AB 253GR 5-HOLE CROSS PLT

Category: Flat Plate Strut Channel Connectors

SUP AB 241 1/2GR SQ WSHR 1.5X

Category: Strut Channel Washers

LED Lamp, 16 Watt, 120-277 Volt, Bulb: T8, Length: 48 Inch, Base: Medium Bi-Pin (G13), Lumens: 1750, Beam Angle: 190°, Field Angle: 300°, CRI: 80, Color Temperature: 3000K, Rated Life: L70 50,000+ Hours, NOTE: Double-Ended Ballast BYPass Installation, Wired at Both Ends, Utilizes Existing Lampholders, Shunted or Non-Shunted (see wiring diagram on Catalog page .pdf). UL rated for enclosed fixtures. TCP LED Type AB™ Tube.

Category: T8 Tubular LED Lamps

THB SSF-VJ2-AB CABLE SUPPORT

Category: J-Hook From Wire/Rod & Beam

S-strut Ab844-10 Gold Snap-in cvr

TRU8341-LS-C-AB

ABBTB 2TLA020056R4000 M12-C103 10 M CBL 8X0,25MM TYPE AB

Category: 8-Pin Cordsets

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors.

Category: Assembled Poke-Through Units

Abb; Rotary Operator Handle; Direct Mount; Mounting: Fixed, Plug-in Breaker; Kt5rh: Rotary Hdl T4-t5 Direct Mtd Lvp; Kt5rh: Rotary Hdl T4-t5 Direct Mtd Lvp

Category: Molded Case Circuit Breaker Operating Handles

AB S202UDCK10 S200UDC MCB 2P

Category: 2-Pole DIN Rail Mount Circuit Breakers

Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Flanges available painted in gray (GY), black (BK), ivory (VY). Flanges also available in plated brushed brass (BS) and brushed aluminum (AL). Slide covers match the painted flange colors, gray, black, ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum color slide holder (AA). Includes Wiremold Open System unloaded inserts. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC7 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC7 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 20A Duplex Standard or IG and Cat 6 Connectors

Category: Assembled Poke-Through Units

1X36 ANCHOR BOLT (4EA)

WIREMOLD ALA-ABRT

Category: Large 2-Piece Metallic Raceway Cover Plates

Eaton Crouse-Hinds series Condulet EAB conduit outlet box with cover, 3" cover opening diameter, Feraloy iron alloy, X shape, 3/4"

Category: Type X Iron Conduit Bodies

Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Cover assembly also includes two openings for pass-through capability for one 4-pair Category 5e or Category 6 cable per opening. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9 Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies