"connector waterproof"

Vinyl Insulated Spade, 16-14 AWG, #10 Stud, 16-14 AWG, 300 Volt, Blue, Pack Of 20

Category: Vinyl Insulated Standard Fork Terminals

NSI HTM12-250-3 HI TEMP MALE

Category: Female Non-Insulated Wire Disconnects

NSI S16-8N-B 16-14 AWG NYLON

Category: Nylon Insulated Standard Fork Terminals

EASY-SPLICE WRAP-AROUND 4/0 4IN

Category: Low Voltage Gel Filled Splice Kits

Nylon Insulated Locking Spade, 12-10 AWG, 600 Volt, Yellow, 1000 Per Pack

Category: Vinyl Insulated Standard Fork Terminals

Vinyl Insulated Flange Spade, 22-18 AWG, 300 Volt, Red, 100 Per Pack

Category: Vinyl Insulated Block Fork Terminals

12-10 AWG, 50 Per Pack

Category: Vinyl Insulated Standard Fork Terminals

NSI F22-110-2N 22-18 AWG NYLO

Category: Female Nylon Insulated Wire Disconnects

NSI S22-8 22-18 AWG BARE SPAD

Category: Non-Insulated Locking Fork Terminals

12-10 AWG Vinyl Insulated Spade #6 Stud, 50 Per Pack

Category: Vinyl Insulated Standard Fork Terminals

12-10 AWG, # 10 Stud Vinyl Insulated Locking Spade, 50 Per Pack

Category: Vinyl Insulated Standard Fork Terminals

NSI R12-38V 12-10 AWG VINYL

Category: Vinyl Insulated Ring Tongues

Easy-Splice Heat Shrinkable End Cap 4/0 AWG - 750 MCM These caps replace greases, tapes, epoxy, encapsulation, or dips. In most sizes, installation may be accomplished in less than one minute. Heat-shrinkable end caps provide for efficient and positive cable end sealing. Made of thermally stabilized polyolefin, the interior of the HSC is coated with a meltable sealant to assure a watertight seal, complete insulation, abrasion and corrosion resistance. Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit. HSC end sealing caps are qualified to ANSI C119.1-1986 and rated to ICEA electrical withstand test for 1,000 volts. HSC end sealing caps can be used as a live seal for cables carrying up to 1,000 volts. They can also be used as end seals for storing and pulling de-energized cable.

Category: Heavy Wall Heat Shrink

(1) 500-6 Primary (12) 4-14 Secondary, Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

NSI GLC-440DB "HEAVY DUTY GRO

Category: Bare Wire Ground Clamps

Nylon Insulated Ring Terminal, 4 AWG, 5/16? Stud, 15 per Pack

Category: Nylon Insulated Ring Tongues

8 AWG Nylon Insulated Ring #10 Stud, 25 Per Pack

Category: Nylon Insulated Ring Tongues

NSI PT-22V-BULK 22-18 AWG VIN

Category: Nylon Insulated Pin Terminals

NSI C-3 TINNED COPPER SPLICE-

Category: Long Barrel Copper Compression Sleeves

Copper Compression Lug, Conductor Size: 350 MCM, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs

Copper Compression Lug, Conductor Size: 3/0 AWG, 2-Hole Stud, Long Barrel, Stud Diameter: 3/8".

Category: 2-Hole Long Barrel Copper Compression Lugs

Copper Compression Lug, Conductor Size: 3/0 AWG, 1-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 1-Hole Long Barrel Copper Compression Lugs

2 Port Panelboard Lug 800 MCM - 350 MCM Panelboard style for multi-conductor with NEMA mounting hole spacing for turn prevent and secureness. Made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Rated 600 volts (2000V max per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.750".

Category: Aluminum Panelboard Lugs

NSI L20N-14 #2/0 AWG MAX WIRE

Category: 2-Hole Long Barrel Copper Compression Lugs